Refrigeration Engineer
$132.09kJBS USA Holdings, Inc.
Refrigeration Engineer / Refrigeration Project Engineer
At Pilgrim's, safety is a condition, which means the safety of our team members comes first - always.
The Refrigeration Engineer / Refrigeration Project Engineer is responsible for performing the following duties within his/her area of responsibility:
- Working with all Pilgrims sites to promote safe processes, projects, products, and people through use of OSHA safe work practices
- Development and implementation of CAPEX ammonia refrigeration projects for all Pilgrims sites. Including but not limited to budgeting, scope development, drawings, management of contractors for the execution/construction of the system, and project close-out per Pilgrims CAPEX program
- Refrigeration system design including but not limited to: equipment selection, piping diagrams, system controls, pipe sizing, and all applicable codes and standards
- Ability to troubleshoot and make recommendations for the safe and effective operation of ammonia refrigeration systems and equipment
- Ability to complete required system calculations including: room & process heat loads, mass & energy balance for the system, air balance, and psychrometric
- Understand the OSHA PSM codes and standards and ensure safe design and implementation/construction of ammonia refrigeration systems and equipment
- Understand and utilize the IIAR/ANSI/ASHRAE codes and standards as they apply to the construction and operation of the ammonia refrigeration system
- Participate in the management of change procedures and standards for all changes made to the ammonia refrigeration systems
- Participate in process hazards analysis (PHAs) for Pilgrims' sites as required
- Participate and help lead/drive the completion/resolution of all PSM/RMP recommendations and other related issues as required
- Participate in incident investigations using root cause analysis for reported ammonia leaks as required
- Help sites within the company continually improve their PSM/RMP programs
- Maintain knowledge on all new refrigeration codes and standards
- Tracking and updating all process safety information any time there is a change to the systems
- Travel to Pilgrim's sites as required to ensure proper operation, safety, and compliance
- Travel to Pilgrim's sites as required for the safe implementation/construction of ammonia refrigeration systems
- Other related duties as required
Basic qualifications:
- Experience in the design and construction of ammonia refrigeration systems
- Competent with the use of AutoCAD
- English/Spanish bi-lingual a plus
- Basic knowledge of the operations of ammonia refrigeration/thermodynamic systems
- Ability to complete engineering calculations for ammonia inventory, relief valve design, load and energy balances, ventilation requirements and releases
- Experience with six sigma, total predictive maintenance (TPM), operational excellence (OE) or other continuous improvement methodologies preferred
- Experience using APSM or similar PSM compliance software
- Ability to read and interpret piping and instrument diagrams (P&IDs) and block flow diagrams
- Ability to write reports, business correspondence, and procedure manuals professionally
- Ability to present information and communicate effectively to all levels of management
- Excellent organizational, communication, and leadership skills
- Detailed oriented and self-motivated
- Proven project management and change management skills
- Ability to apply and interpret regulatory standards and consensus standards to situations not specifically addressed by the standards
- Demonstrated ability to respond to crises in an effective and timely manner
- Must be willing to travel
- Must be willing to relocate to a Pilgrim's facility or live within the vicinity of a Pilgrim's facility
Educational requirements:
Bachelor’s degree in mechanical engineering, chemical engineering or related field preferred
Why work for Pilgrim's?
- Benefits: Vision, medical, and dental coverage begin after 60 days of employment;
- Paid time off: sick leave, vacation, and 6 company observed holidays;
- 401(k): company match begins after the first year of service and follows the company vesting schedule;
- Base salary range of $132,086.00 +/- based on experience
- Incentive pay: This position is eligible to participate in the company's annual bonus plan; the amount of bonus varies and is subject to the standard terms and conditions of the incentive program; and
- Career development: Our company is dedicated to supporting professional growth by offering continuous learning opportunities and a focus on career growth through various learning and development programs;
- Better futures
The company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct drug, alcohol, and background checks for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work.
About us: Pilgrim's is a leading global food company with more than 62,000 team members worldwide. The company processes, prepares, packages, and delivers fresh, frozen, and value-added food products for customers in more than 100 countries. Pilgrim's operates protein processing plants and prepared foods facilities in 14 states, Puerto Rico, Mexico, the U.K, the Republic of Ireland, and continental Europe.
Our mission: To be the best in all that we do, completely focused on our business, ensuring the best products and services to our customers, a relationship of trust with our suppliers, profitability for our shareholders, and the opportunity of a better future for all of our team members.
Our core values are: availability, determination, discipline, humility, ownership, simplicity, sincerity
EOE, including disability/vets
Unsolicited assistance: JBS and its companies do not accept unsolicited assistance from any recruitment vendors for any of our open jobs. All resumes or candidate profiles submitted by recruitment vendors or headhunters to any employee at JBS and its companies or via the applicant tracking system, in any form without a valid written request and search agreement previously approved by HR, will be solely owned by JBS and its companies. No fees will be paid should the candidate be hired by JBS and its companies because of an unsolicited referral.
- ...Mechanical HVAC EngineerClient is seeking an enthusiastic Mechanical (HVAC) Engineer with experience supporting Power Generation and Heavy Industrial Projects in either our Mt. Laurel, NJ or Charlotte, NC offices. The successful candidate will have experience in HVAC...SuggestedDaily paidPermanent employmentRelocation
$80k - $95k
...Description HVAC Mechanical Engineer Position Description This engineering position integrates the process of document production with a more detailed understanding of systems and systems components. This position can expect exposure to HVAC and Plumbing...SuggestedFull timeContract workFor contractorsWork at officeLocal areaVisa sponsorshipWork visa$80k - $115k
...Job Description Job Description ENGINEERS | SURVEYORS | PLANNERS | SCIENTISTS Morrison-Maierle is a 100% employee-owned firm specializing in integrated consulting and design services in engineering, planning, surveying, and science. As a trusted partner to our clients...SuggestedTemporary workLocal areaWork from homeRelocation packageFlexible hours- ...further to learn how you could help make great things possible not only in your community, but around the world. We believe building engineering is more than systems and structures, it’s about powering progress and enabling innovation. As part of HDR’s Building Engineering...SuggestedContract workWork experience placementWork at office
- ...repairs and replacements. Fabricate sheet metal ductwork in our shop. Install sheet metal ductwork in the field. Install refrigerant piping. Install chilled water piping systems Adhere to all safety policies and procedures Qualifications: ~ Previous...Suggested
- ...Control Systems Engineer - Refinery Automation Location: Billings, Montana Industry: Refining / Process Manufacturing Are you a Control Systems Engineer who wants to take ownership of critical refinery automation systems and play a key role in a major DCS...For contractors
- ...Our Process-Mechanical Engineer position offers an exciting opportunity for the selected candidate to be part of Donohue & Associates, a firm with national water/wastewater expertise in a small company environment. We are seeking an experienced engineer who can work with...Temporary workFlexible hours
$90k - $115k
...Description Plumbing - Mechanical Engineer Position Description Cushing Terrell is seeking an experienced Plumbing Mechanical Engineer to join our growing consulting team in Billings, Montana. This is a senior-level role within a multidisciplinary architecture...Full timeWork at officeLocal areaVisa sponsorshipWork visa$20 - $25 per hour
.... Qualifications • Pursuing an Associate's or Bachelor's degree in Construction Management, Mechanical, Civil or Electrical Engineering or related degree • Must be legally authorized to work without requiring sponsorship for employment to begin or continue employment...Full timeContract workTemporary workFor subcontractorSummer workInternshipSummer internshipWork at officeRelocationWeekend work- Talen Energy's Engineering Team in Colstrip, MT is seeking an entry-level engineer to support project work across power-plant disciplines. You will learn under supervision, assist in smaller projects, and apply established procedures to produce technically sound, cost-effective...Internship
$75k - $120k
Overview: TGK Automotive Specialists – We have been serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction. The Senior Automotive Technician is responsible...Bi-weekly payLocal areaImmediate startMonday to FridayFlexible hours$86.5k - $119k
Who We AreApplied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor...Full time$156k - $214.5k
...Who We Are Applied Materials is the global leader in materials science and engineering solutions that are at the foundation of virtually every new semiconductor chip and advanced display in the world. The equipment that we create and service is essential to advancing...Full timeRelocation$110k
...Job Description Job Description Description We are seeking a talented Mechanical Engineer to join our team! ~ In this position, you will play a key role in designing, developing, and documenting mechanical & plumbing systems for a variety of residential, commercial...Work at officeWork from home- ...agriculture.SummaryCHS, Inc. has an exciting opportunity at our Oil Refinery facility in Laurel, MT. We are looking for an Process Engineer to work with a team to prepare designs, specifications, start-up assistance, and support for refinery. You must be a detail-...Minimum wageTemporary workInternshipWork at officeLocal area
$20 per hour
Maintenance Mechanic - Engineering Sidney Health Center is seeking a Maintenance Mechanic to join our I CARE team in the engineering department. Employment Status Full‑time Compensation $20.00 per hour starting wage, aligned with internal pay structure and experience...Hourly payFull timeRelocation package- ...Industrial Engineer Resodyn is seeking a passionate, detail-oriented Industrial Engineer to monitor our current operations and to establish more efficient production processes. The industrial engineer's responsibilities include analyzing operations, designing workflows...
- ...United States of America Job ID: R0135472 Date Posted: 2026-06-29 Company Name: HITACHI ENERGY USA INC Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: The opportunity Join Hitachi Energy and play a key role in...Full timeRemote workWorldwideFlexible hours
$78.5k - $108k
...Who We Are Applied Materials is the global leader in materials science and engineering solutions that are at the foundation of virtually every new semiconductor chip and advanced display in the world. The equipment that we create and service is essential to advancing...Full timeRelocationShift work$82.8k - $99.75k
...all Federal Contractor employee requirements. Nomad GCS does not support the H1B Visa for this position. Position: Industrial Engineer III Division: Innovative Solutions Group (ISG) Department: Manufacturing & Industrial Engineering Status : Full-Time Nomad...Full timeFor contractorsCasual workH1bWork at officeLocal area- ...Engineering Role at Designer BrandsAt Designer Brands, this role sits at the center of how our distribution network runs every day. As part of the Engineering team, you'll work closely with operations to shape how work gets done across our Distribution Centers—making processes...Remote work
- ...The Opportunity At Designer Brands, this role sits at the center of how our distribution network runs every day. As part of the Engineering team, you'll work closely with operations to shape how work gets done across our Distribution Centers-making processes smarter, systems...Work at officeRemote work
$60k - $75k
...testing for warehouse fulfillment and manufacturing systems in industries like food and beverage.Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site.Provide clear communication and updates to customers and project teams...Daily paidTemporary workWork at officeLocal areaRelocation packageLong distanceFlexible hoursWeekend work$105k - $130k
..., which may be before or after the 3-day posting window. Job Description Position Overview Invenergy is hiring a Project Engineer, Renewable Electrical Engineering (SCADA). This role is on the Invenergy Construction team and is a key driver of how our wind, solar...Full timeFor contractorsRemote workVisa sponsorship- Job Description Maintenance Engineer Greater Minneapolis Area | Day Shift | Full-Time A global leader in food processing technology is seeking a Maintenance Engineer to join its technical applications team. This is a unique opportunity for a maintenance professional who...Full timeDay shift
- ...Our busy hotel is seeking an energetic, customer-oriented maintenance engineer to ensure that all of our visitors have an excellent experience at our property. You'll be in charge of the building's maintenance and preventative programs daily to ensure people's enjoyment...Hourly payStart working todayShift work
$28.07 per hour
...maintenance tasks. Support diagnosis of mechanical and electrical HVAC issues under guidance of senior mechanics. Conduct refrigerant recovery and charging under proper supervision. Maintain tools, materials, and work areas in a clean and safe condition....Hourly payPermanent employmentFor contractorsImmediate startFlexible hours$21.29 per hour
...Glendive, MT, USA | Hourly | 21.29 per hour - Pay Beginning at $21.29 per hour | Full Time Maintenance Engineer Glendive, MT | Full-Time | Monday–Friday | 12:00 PM – 8:30 PM | Pay Beginning at $21.29 per hour Help Keep Healthcare Running Glendive Medical Center...Hourly payFull timeTemporary workMonday to Friday- ...Job Description Community Medical Center Maintenance Engineer Job Type: Full-Time Monday - Friday 8AM - 5PM Your Experience... ...stationary equipment including boilers, generators, and refrigeration in buildings, plants or industrial facilities. Ensures that equipment...Full timeWork experience placementLocal areaMonday to Friday
- ...that our facilities are accessible to alldrive change in our company and industry through action and implementationThe Maintenance Engineer (ME) is responsible for the general maintenance, operation and upkeep of the campground buildings, facilities, equipment, and...Local areaShift workNight shiftWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Refrigeration Engineer. Be the first to apply!




