Manual Lathe / Conventional Lathe Machinist 1st shift
$40 - $45 per hourRBC Bearings
Manual Lathe And Mill - Machinist 1st Shift
This position is primarily responsible for machining aircraft parts using approved technical data. The position requires a reliable self-motivated machinist that can read and follow directions. Must be able to work individually and in a team environment.
Essential Duties And Responsibilities:
- Machining aircraft parts using approved technical data.
- Work overtime and holidays on short notice.
- Follow customer's special instructions and requirements.
- Follow all company procedures and policies.
- Follow all safety and security policies and regulations.
- Back up department functions, cross-train in other departments and perform other duties as assigned
- Report to work on a regular and consistent basis.
Required Ability To:
- Strong manual machining abilities, utilizing lathes, mills and hones
- Set-up and operate manual/conventional machines.
- Basic use of ALL machine shop precision tools and bore gages.
- Able to use manual lathe to turn OD, ID, face and groove parts.
- Able to make tooling and fixture.
- Hold tolerance as close as +/-.0002".
- Be a reliable self-starter.
- Demonstrate the use of common hand tools
- Demonstrate the use of balance machines, micrometers, dial calipers, and pressure gauges
- Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills
- Resolve workplace differences and conflict to achieve goals and objectives in a professional manner
- Foster an atmosphere of new ideas, input and creative solutions when faced with challenges
Competent in machine shop mathematical practices
Pay Range: $40 to $45/hour
Job Type: Full-time
- 401(k)
- 401(k) matching
- Dental insurance
- Employee discount
- Flexible spending account
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Parental leave
- Vision insurance
Work Location: In person
Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
RBC Bearings$20 - $25 per hour
...Job Description Job Description Conventional Machinist – Manual Lathe & Mill | $20–$25/hr Location: Torrance, CA Pay: $20.00–$25.00/hr... ...Depending on Experience) Employment Type: Full-Time Shift: 7:30 AM – 4:15 PM | 45-minute lunch break Now Hiring...Day shiftFull timeLocal areaImmediate startShift work$27 - $38 per hour
...success, come join our team! We are currently hiring a Conventional Lathe Machinist . This role produces components by setting up and... ...schedule. We work four 10-hour days totaling 40 hours. First Shift Schedule: 5:00 AM to 3:30 PM Monday through Thursday....Day shiftHourly payCurrently hiringLocal areaMonday to Thursday$22 - $25 per hour
...Job Description Job Description Conventional Machinist – Traubs/Lathe in Gardena, CA — $22.00–$25.00/hr DOE, 2nd shift, contract-to-hire. Set up and operate conventional machining equipment for precision fastener parts. THE BASICS Pay: $22.00–$25.00 per hour...SuggestedHourly payWeekly payContract workFor contractorsLocal areaImmediate startShift workAfternoon shift$30 - $50 per hour
...Lathe Machinist Job Description Experience: Mid Level Salary: $30 - $50 per hour Job Details Are you a skilled machinist with a knack for... ...eye for detail? We are currently seeking a highly experienced Manual Machinist to join our dynamic team in the manufacturing industry...SuggestedHourly payPermanent employmentFull time$20 - $35 per hour
...Job Description Job Description Conventional Machinist Location: Torrance, CA Industry... ...Type: Direct Hire | Full-Time Shift: Day Shift Pay Range: $20-35 per... ...for someone with experience operating manual mills, lathes, grinders, drill presses, hones, or...Day shiftHourly payFull timeShift work$20 - $35 per hour
...Conventional Machinist Hot Job Torrance, CA 90505 Overview Salary Range $20.00 - $35.00 Hourly Position Type Full Time Job Shift Day Machinist Robinson Helicopter Company is a leading... ...specifications. Familiarity with lathes, mills, drill presses, surface...Hourly payFull timeShift work$23 - $27 per hour
...goal of enabling human life on Mars. CNC LATHE MACHINIST (STARSHIP) RESPONSIBILITIES: Perform... ...quality consistency while reducing manual intervention Perform CNC machine preventative... ...: Estimated start times: 1st shift (5:00 AM) & 2nd shift (2:30 PM) Must...Day shiftPermanent employmentFull timeTemporary workAfternoon shift$30 - $35 per hour
...Job Description Job Description Essential Functions of the Job: ~ Set up. ~ Operate CNC machines lathes in order to meet daily production and quality requirements. ~ Follow company quality control standards to include in-process inspection and documentation....Permanent employmentWork at office$25 - $35 per hour
...Job Description Job Description CNC Lathe Setup Technician - 1st & 2nd Shifts Location: Torrance, CA | On-Site Position Type: Temp-to-Hire Department: CNC Turning / Mill-Turn Shifts: 1st and 2nd Shift Opportunities Pay Rate: Anticipated $25.00-$35.00...Day shiftTemporary workShift workAfternoon shift$30 per hour
...Job Title: Machinist Location: Torrance, CA Pay Rate: $30.00 per hour Employment Type: Full-... ...requirements. Responsibilities Set up and operate manual and/or CNC machines (mills, lathes, grinders, etc.) Read and interpret blueprints,...Hourly payFull timeMonday to Friday$25 - $32 per hour
...Job Description Job Description CNC Lathe Set-Up Technician in Gardena, CA — $25.00–$32.00/hr DOE, 1st shift, direct hire. Set up and run CNC lathes for aerospace fasteners and precision components. THE BASICS Pay: $25.00–$32.00/hr, depending on experience...Day shiftLocal areaImmediate startShift work$25 - $32 per hour
...Job Description Job Description CNC Lathe Set-Up Technician in Torrance, CA — $25.00–$32.00/hr DOE, 1st or 2nd shift, direct hire. Set up and run CNC lathes for precision components. THE BASICS Pay: $25.00–$32.00/hr, depending on experience Shift: 1st shift...Day shiftLocal areaImmediate startShift workAfternoon shift- ...Description Job Description Title: Machinist Location: Torrance, CA 905... ...experience and position Shifts Available: ~3rd Shift: 11:0... ...Set up and operate CNC lathes, CNC mills, and CNC grinders... ...&T knowledge preferred. ~ Conventional machining knowledge is a plus...Day shiftShift workNight shiftAfternoon shift
$44k - $81.5k
...cyber domains in the interest of national security. Job Title: Machinist B Job Code: 47591 Job Location: Gardena, CA Job Schedule: 9/80:... ...trained and assigned: lappers, ID grinders, ID slicers, OD grinders, lathes, Blanchard grinders, surface grinders, fine grinders, vertical...Local areaFlexible hours$32 - $38 per hour
...Job Overview The R&D Prototype Machinist is responsible for supporting prototype fabrication... ...on machinist capabe of operation CNC and manual machining equipment, building prototypes,... ...proficiency operating manual mills, lathes, saws, drill presses, grinders, and related...Flexible hours$25.58 - $38.36 per hour
...world, so we can all enjoy living in it. About the Role: Perform complete and independent setup of various machines such as lathes, mill/drill, and surface grinder, working from O.I.S., prints, tapes sketches, oral and written instructions to determine the...Part timeApprenticeshipCurrently hiringRelocation packageFlexible hours$46.75 - $63.25 per hour
...Senior 5-Axis Prototype Machinist Varda is seeking an exceptional Senior 5-Axis Prototype... ...Experience ~10+ years of hands-on experience in manual and CNC machining, including advanced 5-... ..., such as mill-turns and live-tool lathes. ~ Mastery in troubleshooting machining...Permanent employment- ...We are seeking a highly skilled and versatile Development Machinist to join our Development Shop at Impulse. This is a “do-it-all... ...complex prototype and development parts using CNC mills, lathes, and manual machines. Programming: Use CAM software (e.g., NX, Esprit...Permanent employmentFull time
- ...with engineering to design new tools from the ground up. Operate core shop resources: welding, water jet, laser tracking, manual mills and lathes, plus general assembly equipment. Maintain, iterate, and improve existing tools as part designs evolve. Build...
- ...CNC Operators - 1st & 2nd Shift We are seeking highly skilled and motivated... ...opportunity for experienced machinists who take pride in their... ...CNC machines including Lathes, Mills, and Grinders. You will... ...operations using CAM software and manual programming techniques is a...Day shiftMonday to FridayFlexible hoursShift workNight shiftAfternoon shift
$18 - $22 per hour
...to 2 years’ experience as a CNC Machine Lathe operator. Experience with Takisawa, Kitamura... ...and fill out SPC charts. Perform 1st article measurements as directed by lead... ...to enable the candidate to move into CNC machinist and Setup machinist position. The candidate...Day shiftPermanent employmentNight shift- Hubbel - - Responsibilities: Set up and operate CNC mills, lathes; Fabricate, modify prototype parts; Read engineering drawings and CAD models; Inspect with precision measuring instruments; Provide machining support to Manufacturing
$38 per hour
...-Quality Manufacturing Environment as a Machinist! PDS Tech Commercial is seeking... ...Studer grinder experience. Conventional grinding experience. Strong knowledge... ...000 attendance bonus ~ Stable swing-shift schedule ~ Precision machining environment...Hourly payPermanent employmentTemporary workLocal areaAfternoon shift- ...Machining Incorporated is looking for skilled Programmers and Master Machinists to join our team in Compton, CA! If you're a precision-driven... ...operations Set up, operate, and monitor CNC mills, lathes, and other precision machining equipment Interpret and work...
$40 - $53 per hour
...We're hiring a Sr. Engine Machinist to make the precision parts that... ...up and running CNC mills and lathes, holding tight tolerances on demanding... ...engine parts Run manual mills, lathes, and drill presses... ...can build the thing. Priorities shift as we learn. If that tradeoff...Full timeTemporary workLocal areaFlexible hoursShift work$35 per hour
...Job Description Job Description CNC Machinist - Precision Manufacturing Earn $35/hr + Up... ...include: Setting up and operating CNC lathes or CNC mills Producing precision-machined... ...needed Stand and move throughout the shift Work safely around manufacturing...Hourly payRelocation packageShift work$75 per hour
...Job Description The role of a Senior Machinist is the ability to manufacture parts from... ...: Up to $75/h depending on experience Shift : Mon-Fri from 8 am to 5 pm Comprehensive... ...Operate, set up, and maintain CNC Mills and Lathes Program and edit CNC machine tool...Full timeImmediate startFlexible hoursShift work$18 - $40 per hour
...looking for a CNC Machine Operators, CNC Machinists and CNC Programmers to join their... ...(not required): CNC / Mill or Lathe / CNC Operating or Setup or CNC Programming... ...$18-40hr depending on experience Shift: Mon Fri 1st shift 5am - 2:30pm 2nd shift 2:3...Day shiftWeekly payContract workTemporary workImmediate startShift workAfternoon shift$24 - $38 per hour
...Description Job Description CNC Operator / CNC Machinist Location: South Bay Area (Hawthorne) Pay: $24.00 - $38 1ST AND 2ND SHIFT OPENINGS Join a fast-paced manufacturing... ...Operate CNC mills and/or lathes to manufacture precision components. Load...Day shiftHourly payWeekly payContract workTemporary workShift workAfternoon shiftEarly shift$30.15 - $45.23 per hour
...so we can all enjoy living in it. About the Role: The Machinist will set up and operate OD/ID gear grinding machines to correct... ...training Experience 1 to 2 years Must be willing to work any shift Preferred Candidates will have the following: CNC...Part timeCurrently hiringWork at officeRelocation packageFlexible hoursShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Manual Lathe / Conventional Lathe Machinist 1st shift. Be the first to apply!



