Fabricator 1

Location 28800 Ida St, Valley, Nebraska 68064-8016 Shifts & Compensation Available Shifts: 1st – Monday–Thursday from 5:00 AM to 3:00 PM 2nd – Monday–Thursday from 3:00 PM to 1:00 AM Compensation: $23.90 per hour plus $2.00 per hour shift differential for 2nd Shift Job Summary The Fabricator responds in a positive fashion to the direction of a department supervisor, lead person and/or cell leader, setting up and operating production machines. The incumbent also loads and unloads material, ensuring piece/part integrity. All department equipment and machinery need to be operated in a safe and efficient manner. The Fabricator completes all types of shop forms including move tags, inspection verification tags, employee volume control sheets, and employee communication sheets. This position requires use of safety guarding apparel including safety glasses, metatarsal boots, and hearing protection. The Fabricator may be called upon to operate a forklift provided they are qualified and certified under Valmont's training program. Basic Qualifications A strong working knowledge of all measurements found on a tape measure The ability to stand and move about the shop floor for at least half of the shift for the entire shift The ability to safely lift up to 25 pounds frequently throughout the shift The ability to work over ten hours a week in overtime when required for business needs The ability to use e-mail Additional Qualifications Excellent communication, organizational, analytical and interpersonal skills Attention to detail and accuracy while working in a fast‑paced environment with multiple distractions A satisfactory safety record An acceptable work history and attendance record Passion and integrity with the drive to excel and deliver exceptional results Preferred Qualifications An educational level at or above a high school diploma or GED equivalent Proficiently use thread gauges, micrometers, protractors and dial calipers Experience reading and interpreting blueprints or process sheets in a professional environment Experience in a fabrication or manufacturing environment Basic math (addition, subtraction, multiplication, and division) Able to communicate orally and in writing in English Able to comprehend simple blueprints Able to use a computer to enter production data and perform time keeping functions Decision Making This job requires the employee to make decisions that affect the quality of the products they are manipulating. These are decisions that affect the employee’s own work quality and output. The Fabricator should be knowledgeable in the operations of machines required by this job classification and be able to maintain them in good working condition (TPM). Must possess the ability to understand all gauging and checking fixtures used in checking the parts being produced by the machines involved in the classification. Must be able to check the finished part to the blueprint and to the frequency rate of the work instruction. The employee must understand the processes and functions of the equipment to determine when changes need to be made in the routine tasks due to abnormal conditions. These abnormal conditions may be equipment or piece related. Able to use initiative in solving major problems within everyday activities. Must have a good understanding of their own abilities and knowledge to determine when to seek help making decisions. Incumbent needs to recognize discrepancies and bring them to the attention of the appropriate personnel. Able to use one’s own initiative in solving minor problems in everyday activities. Physical Effort The Fabricator stands and moves about his or her station and in some cases throughout the shop environment. Bending, pivoting, reaching overhead and reaching outward are frequent physical movements that need to take place. The employee needs to be able to handle parts, tools, material and equipment which requires gripping, grasping, and bending of the wrist. Depending on the area where the fabricator is working this is done on a frequent to constant basis. The operator lifts, carries, pushes and pulls parts weighing an average of 29 lb. Although some items weigh more, a maximum lift of 50 lb. is all that is required. Industrial lifts are in place for the fabricators to use and Valmont encourages using the buddy system, when possible, for lifting heavier items. The fabricator needs to maintain the stamina and energy to work long hours during the busy fabrication seasons and at a pace that enables the cell or department to attain set goals. Working Conditions The incumbent may work around material which is stacked overhead height. Most operations in a manufacturing environment expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, or oil). There are fumes from lift trucks, side loaders and straddle trucks. Working conditions may vary with specific work assignments and departments. Inside shop work is the most common. Indoor work may be in a noisy environment with sound levels above 80 decibels. Safety glasses and metatarsal safety shoes are required in the production area of the plant. The employee may be operating equipment that uses liquid coolant and may also be exposed to cast iron dust. The employee must be able to spend the entire work shift within this production environment. Benefits Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short‑term and long‑term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, type 2 diabetes reversal, one‑on‑one health coaching, mortgage services and more Equal Employment Opportunity Statement Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email View email address on click.appcast.io. #J-18808-Ljbffr