Low Voltage Electrician

Job Description

Job Description

Job Title: Low Voltage Electrician – Working Lead Job Description

This role is for a hands-on low voltage electrician who serves as a working lead, actively performing electrical and low voltage installations while guiding a small crew. The position involves a mix of residential work, commercial fit-outs, renovations, new construction, and service projects across multiple job sites. You will install, repair, and troubleshoot electrical and security systems, interpret blueprints, and ensure projects are completed safely, efficiently, and to industry standards.

• Lead, train, and manage a crew of 1–2 electricians, occasionally up to 3, while working alongside them on installations and service work.
• Perform low voltage electrical work in residential and commercial environments, including fit-outs, renovations, new construction, and service projects.
• Work independently when required, taking full ownership of assigned tasks and project deliverables.
• Read and interpret electrical blueprints and drawings to plan and execute installations accurately.
• Troubleshoot electrical systems and low voltage systems to identify issues and implement effective solutions.
• Plan layouts and installations for electrical and low voltage cabling, devices, and systems.
• Install, repair, and troubleshoot electrical and security systems, including light fixtures, switches, alarms, panel boxes, and related components.
• Install and test CAT5e, CAT6, fiber optic, coaxial, and other low voltage cabling in accordance with industry standards.
• Terminate fiber and copper cabling following established industry practices and quality requirements.
• Install limited energy cabling infrastructure for access control systems, IP CCTV systems, wireless networks, and intrusion detection systems.
• Perform conduit work, including rough-in to finished installations, using various types of pipe (metal and non-metal) as required by the project.
• Carry out trenching and site work to support underground or exterior electrical and low voltage installations.
• Install devices, sensors, fire alarms, and security systems, and ensure proper panel wiring and electrical connections.
• Conduct cable pulling, wire runs, and conduit bending to support complete electrical and low voltage installations.
• Communicate effectively with field personnel and office staff to coordinate schedules, project needs, and updates.
• Maintain a strong focus on safety at all times and adhere to all site safety protocols and best practices.
• Drive to various job sites, typically within approximately 1–1.5 hours of the Lehigh Valley area, sometimes visiting multiple sites in a single day.
• Use and maintain personal hand tools and cordless power tools required for daily electrical and low voltage tasks.
• Participate in interviews and evaluations as part of a six-month contract-to-hire period designed to assess mutual fit.

• At least 3 years of experience running a crew of 1–2 individuals in residential and/or commercial electrical settings.
• At least 5 years of experience in commercial and residential electrical work.
• Proven lead experience overseeing projects, directing helpers, and ensuring work quality and safety.
• Strong ability to read and interpret blueprints and electrical drawings.
• Demonstrated troubleshooting experience with electrical systems and low voltage systems, including the ability to identify and resolve issues in the field.
• Experience training and developing helpers or junior crew members.
• Hands-on experience with office fit-outs and renovations in commercial environments.
• Proficiency in low voltage installation, including CAT5e, CAT6, fiber optic, coaxial, and other cabling types.
• Experience with installation of devices, sensors, fire alarms, and security systems.
• Skill in conduit bending, running conduit, and pulling cable and wire for electrical and low voltage systems.
• Experience with panel wiring and general electrical wiring in both residential and commercial settings.
• Ownership of core hand and cordless power tools or a clear willingness to obtain at least 80% of the required tools before starting (e.g., lineman’s pliers, side cutters, channel locks, needle-nose pliers, wire strippers, flashlight, volt-tick or multi-meter, roto-splits, tape measure, keyhole saw, hand bender, utility knife).
• Possession of proper PPE, including steel or plastic tip boots, hard hat, high-visibility shirts or vest, safety glasses, and gloves.
• Valid driver’s license and reliable personal vehicle for travel to job sites.

• OSHA-10 or OSHA-30 certification is a plus.
• Journeyman certification is preferred but not required.
• Bucket truck experience is a nice-to-have.
• Any additional certifications such as lift certifications, formal electrical schooling, or other industry-related credentials are valued.
• Familiarity with various types of metal conduit (RMC, GRC, IMC, EMT) and non-metallic conduit (RNC, RTRC, PVC, ENT).
• Experience working on rough-in through finished phases of electrical and low voltage projects.
• Comfort with traveling to different job sites throughout the week, including locations up to approximately an hour or more away.
• Ability to pass any necessary pre-screenings that may be required for specific projects.

You join a stable, well-established electrical contractor with a strong reputation and a steady flow of work driven by referrals rather than advertising. The company maintains consistent hours and is committed to keeping team members working, even when projects shift. The six-month contract-to-hire structure is designed to ensure a mutual long-term fit, with an emphasis on honesty about strengths and areas for development. Once hired, you receive robust benefits from day one, including substantial employer contributions toward medical insurance, fully covered dental and vision, a 401(k) with company match, and a progressive PTO plan that grows with your tenure. The culture values reliability, safety, and teamwork, and offers flexibility through a three-strike approach to reassignments if a particular crew or foreman is not the right fit.

Work takes place in both commercial and residential settings, including office fit-outs, renovations, new construction sites, and service environments. You typically work Monday through Friday from approximately 6:30 a.m. to 3:00 p.m., with overtime and occasional Saturdays as needed; start and end times may vary depending on the job site. Job sites are generally within about 1–1.5 hours of the Lehigh Valley region, with some projects as far as Scranton and the outskirts of Philadelphia, and you may visit multiple sites in a single day. The environment is field-based and hands-on, involving tasks such as conduit bending, trenching, cable pulling, panel wiring, and installation of low voltage and electrical systems. You must dress for the weather and be presentable on site, wearing appropriate PPE including hard hat, high-visibility clothing, safety glasses, gloves, and steel or plastic tip boots. Work is performed with standard electrical hand tools and cordless power tools, along with test equipment such as multi-meters and volt-ticks, in environments where safety awareness and adherence to protocols are critical.

This is a Contract to Hire position based out of Allentown, PA.

The pay range for this position is $22.00 - $30.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Allentown,PA.

This position is anticipated to close on Aug 25, 2026.

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Company Description

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.