Full-Time Maintenance Machinist
City of New York
The New York City Department of Environmental Protection (DEP) protects public health and the environment by supplying clean drinking water, collecting and treating wastewater, and reducing air, noise, and hazardous materials pollution. DEP is the largest combined municipal water and wastewater utility in the country, with nearly 6,000 employees. We deliver 1.1 billion gallons of high quality drinking water per day to 8.3 million New York City residents and more than 1 million people in Upstate New York, and we collect and treat an average of 1.3 billion gallons of wastewater per day.
The Bureau of Police & Security seeks to hire a Machinist for the Security Engineering Unit, located at the DEP office in Valhalla, New York.
Working within the maintenance section of the NYC DEP Bureau of Police & Security, under the Security Engineering Unit, the Machinist will analyze and correct service issues and perform scheduled maintenance tasks pertaining to mechanically operated vehicle arrest barriers (VAD's) and associated security equipment. This individual must possess in-depth knowledge of hydraulic, mechanical, and electrical power systems associated with barriers. The selected candidate must be able to troubleshoot, install, replace, maintain and repair components such as actuators, motors, hydraulic pumps, brakes, power supplies, and valves. Furthermore, this individual must perform some metal work such as grinding, welding and reforming to repair and restore barrier housing that has sustained slight to moderate damage due to vehicle collisions. This position will require traveling to multiple locations within 9 upstate NY counties and into the five boroughs of NYC. MACHINIST - 92610
Five years of full-time satisfactory experience as a machinist; At least two and one-half years of full-time satisfactory experience as a machinist plus sufficient full-time experience as a machinist helper or an apprentice machinist, or training of a relevant nature acquired in an approved trade, technical or vocational high school to make up the equivalent of five years of the required experience. Six months of acceptable experience will be credited for each year of helper or apprentice experience or approved relevant training acquired in an approved trade, technical or vocational high school, up to a maximum of two and one-half years.
The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.
$23 - $35 per hour
Job Title Job Located In White Plains NY About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning...SuggestedHourly payApprenticeshipWork at officeMonday to Friday- ...Additive Manufacturing Technician / Machinist Location: Tarrytown, NY Duration: 6 months Rate: DOE US Citizen, GC Holder and EAD Additive Manufacturing Technician / Machinist Support the Prototype Shop with the operation, setup, and maintenance of multiple...SuggestedPart time
- ...career in a challenging environment please contact us today. Job Summary: We are seeking a skilled and dependable General Machinist to join our team. The ideal candidate will have experience operating machining equipment, reading blueprints, and producing high-quality...SuggestedHourly payFull timeRelocation packageNight shiftDay shiftAfternoon shift
$23 - $35 per hour
Job Title Job Located In White Plains NY About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning...SuggestedHourly payApprenticeshipWork at officeMonday to Friday$23 - $25 per hour
Cnc Operator CNC Operator About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many ...SuggestedHourly payWork at officeLocal areaMonday to Friday$20 - $25 per hour
Job Full Description Pay Range $20-$25 A local Mount Vernon NY company is searching for a CNC Operator. This dynamic manufacturing environment is growing and is looking to hire a collaborative worker who will help grow the company to a new level of production. ...Hourly payFull timePart timeWork at officeLocal areaFlexible hoursShift work- ...Machinist Job Duties: Review samples, drawings or instructions to understand specifications of output Take measurements and mark material for cutting or shaping Plan the sequence of necessary actions for the completion of a job Select appropriate machines (e.g...
- Job Description Job Description Join our network of independent alteration professionals specializing in prom and special event dresses. What You'll Do • Alter prom dresses, homecoming dresses, pageant gowns, and quinceañera dresses (hemming, bodice/waist, straps, ...For contractorsLocal areaWork from homeAfternoon shift
- Job Description Job Description Join our network of independent alteration professionals specializing in bridal and wedding wear. What You'll Do • Alter wedding gowns, bridesmaid dresses, and mother-of-the-bride/groom dresses (hemming, bustle, bodice/waist, straps,...For contractorsLocal areaWork from homeAfternoon shift
$20 - $35 per hour
CNC Operator Programming too Location: Croton-on-Hudson, NY Compensation: $20.00 – $35.00 per hour + Shift Differential Job Type: Full-Time Our client, a leading manufacturing company, is seeking a CNC Programmer Operator to join their at their facility...Hourly payFull timeShift workNight shiftDay shift- Job Description Clarapath is seeking a full-time CNC Programmer to join our team in Hawthorne, NY 10532 in a salaried position. The role requires a SolidCAM Programmer who can create programs for a 5‑axis CNC machine and a CNC lathe, with machine shop experience in a manufacturing...Full time
- Job Description Job Title: CNC Setup Technician Job Summary: We are seeking a skilled CNC Setup Technician to join our precision manufacturing team. This role is critical in ensuring CNC machines are properly prepared, configured, and optimized for production...
- Clarapath, located in Hawthorne, NY, is seeking a full-time CNC Programmer with experience in operating 5-axis CNC machines. The successful candidate will be responsible for producing parts while maintaining tight tolerances and finishing quality. The role offers a competitive...Full time
$27 - $44 per hour
Staging Dimensions is seeking an experienced CNC Programmer/Fabricator to join their team in New Castle, Delaware. This full-time role involves programming and machining operations within a 60,000-square-foot facility focused on custom fabrication for high-profile projects...Hourly payFull time$27 - $44 per hour
...and Plexiglas Experience with laminates and veneers Forklift certification Leadership or operator training experience --- Why Machinists Like Working Here Machinists choose Staging Dimensions because: Diverse work with custom fabrication projects rather than...Hourly payPermanent employmentFull timeCasual workMonday to FridayShift workDay shift$21 - $25 per hour
Wazer in Yonkers, NY is looking for a Technical Support Specialist to assist customers with their waterjet cutters. This role involves troubleshooting machine issues and maintaining test setups. Ideal candidates have experience with electromechanical systems and are fast...Hourly pay$21 - $25 per hour
WHY WE NEED YOU WAZER re-invents waterjet cutters. Our ground-breaking small-footprint waterjet cutters bring universal cutting with digital precision to every workshop, big or tiny. Creating such a unique product line was no easy feat, but since then we have proven the...Hourly payTemporary workWork at office$30 per hour
...today. Position Summary: We are seeking an experienced CNC Setup / Programmer to join our team. This role requires a skilled machinist capable of setting up, programming, and operating CNC equipment while maintaining high quality and efficiency standards. The ideal...Hourly payFull timeDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Full-Time Maintenance Machinist. Be the first to apply!
- full time plastic surgery Valhalla, NY
- english full time jobs Valhalla, NY
- health insurance full time Valhalla, NY
- full time flex security officer Valhalla, NY
- companies hiring full time Valhalla, NY
- full time monday friday Valhalla, NY
- full time stock Valhalla, NY
- full time overnight Valhalla, NY
- medical office full time Valhalla, NY
- office cleaning full time Valhalla, NY

