Electrical Engineering Technician
$30 - $43 per hourSeeScan
About this position SeeScan is seeking an experienced Electrical Engineering Technician to support building prototypes, performing circuit testing and troubleshooting, assembling and wiring electronic components, and assisting engineers in research and development.
This is a fully onsite position located in Kearny Mesa. Compensation The pay range for our Electrical Engineering Technician position is $30 to $43 hourly . This range represents a good faith estimate based on the qualifications we expect to find in a successful candidate. Actual compensation offered may be less or greater than this estimate based on a variety of factors, including, but not limited to, our assessment of your ability to bring value to our organization. We offer
This is a fully onsite position located in Kearny Mesa. Compensation The pay range for our Electrical Engineering Technician position is $30 to $43 hourly . This range represents a good faith estimate based on the qualifications we expect to find in a successful candidate. Actual compensation offered may be less or greater than this estimate based on a variety of factors, including, but not limited to, our assessment of your ability to bring value to our organization. We offer
- A position within an established company that has over 40 years of experience
- Medical, dental, and vision coverage
- Traditional and Roth 401(k) investment options, with partial company matching contribution
- Flexible Paid Time Off plan with no cap or "use it or lose it" requirement
- Assemble, wire, and test electronic circuits, control panels, and subassemblies
- Support engineers in developing and debugging prototype hardware
- Operate oscilloscopes, multimeters, signal generators, and other test equipment to verify design performance
- Diagnose and repair analog and digital circuits
- Identify root causes of test failures and collaborate with engineers to implement corrective actions
- Maintain accurate test records, build notes, and revision documentation
- Update wiring diagrams, schematics, and parts lists in coordination with the design team
- Work with manufacturing to transition prototypes into production-ready assemblies
- Contribute to engineering documentation, process standardization, and quality control efforts
- 7+ years of experience as an electrical or electronics technician
- Strong understanding of analog and digital circuitry, PCB layout concepts, and schematic reading
- Skilled in use of standard test equipment (oscilloscopes, logic analyzers, power supplies, etc.)
- Experienced in soldering and reworking surface-mount and through-hole components
- Experienced with microcontrollers, sensors, and embedded systems
- Proficiency with KiCad (Altium experience a plus)
- Strong written and oral communication skills, including the ability to read and interpret data
- Excellent organization skills and attention to detail
- Able to life and move up to 50 lbs.
- Capable of working under a stereo microscope for extended periods
- Fine motor skills and hand-eye coordination for precision reworks
- No recruiters, contractors, or consultants, please
- No relocation assistance or visa sponsorships available for this position
- SeeScan is an Equal Opportunity Employer
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Electrical Engineering Technician in San Diego, CA vacancy
- Job Title This Job is No Longer Available Employer is willing to sponsor qualified candidates for a non-immigrant work visa. Preferred Skills Everforth CyberCoders is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration...SuggestedLocal areaWork visa
- ...Instrument & Control Technician II (Senior Technician)Reports To: Operations & Maintenance ManagerPlant Location: San Diego, CAThe ChallengePerform... ...changes based on cost/benefit.Specify instrument and electrical changes as required.Required to complete the O&M Tech I...Suggested
$50 - $62 per hour
...implementing on-condition tasks, evaluating recommended changes based on cost and benefit, and specifying instrument and electrical changes as needed. The technician computes and analyzes test data, uses installed and portable test equipment along with technical manuals to...SuggestedFull time- ...experienced and skilled Electro-Mechanical Technician to join our team. The team member in this... ...standards, and troubleshoot any mechanical or electrical issues that arise during the process Collaborate with design and engineering teams to ensure that all specifications...SuggestedContract work
- ...Electro-Mechanical Assembly Technician Minimum 2 years of experience assembling or integrating... ...to read and interpret mechanical and electrical drawings. Strong attention to detail... ...acceptance testing in accordance with engineering drawings, schematics, work instructions...Suggested
$25 - $45 per hour
...Complex. Simplexity is a product development engineering firm, hired by leading technology... ...emerges.We are seeking an Electro-mechanical Technician for our San Diego Area office. The... ..., build cables, and perform electrical assembly and troubleshootingUse CAD tools...Hourly payFull timeTemporary workPart timeWork at office- ...Company Description Wintriss Engineering Corporation is an innovative technology company... ..., on-site Production Electromechanical Technician role is based in San Diego, CA. The engineer... ...responsibilities include interpreting electrical and mechanical drawings, performing...Full timeWork at office
$25 - $30 per hour
...Electro-Mechanical Technician - 1st ShiftAs a Electro-Mechanical Technician, you will play... ...and tooling, working closely with engineers and other technicians to ensure each vehicle... ...handling.Conduct basic mechanical and electrical integration, including installation of...Contract workTemporary workCasual workImmediate startRemote workFlexible hoursShift work- ...currently have an exciting opportunity for an Electromechanical Technician to join our RMS (Radiation Monitoring Systems) team located... ...in pipe fitting and tube bending. Bends s tubing to meet Engineering drawings and specifications. Familiar with compression and pipe...Work at officeFlexible hoursWeekend work
$25.47 per hour
San Diego Trolley Apprenticeship Program San Diego Trolley, Inc. ("MTS") offers a four-year apprenticeship program, leading to a rewarding career working on the light rail system for America's finest city. MTS offers competitive wages, exceptional benefits, career advancement...Hourly payFull timeApprenticeshipLocal area- ...Calibration Technician BThe Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid...Local areaRelocation package
- ...Description Job Description Position Overview The Calibration Technician A will apply knowledge of measurement science, mathematics,... ...and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid,...Apprenticeship
$28 - $32 per hour
.... Summary of Position: The Calibration Technician is responsible for inspecting, testing,... ...Quality Control Lab testing (mechanical, electrical, electronic, and dimensional). Maintain... ...lab. Coordinate with production and engineering teams to minimize downtime. Qualifications...Full timeWork at officeLocal areaRemote work$30 - $36 per hour
...and Federal Agency requirements. DFT’s engineering team is a diverse and skilled group, determined... ...and experienced Electro-Mechanical Technician that is responsible for assembling,... ...What You’ll Do: Perform all aspects of electrical and mechanical assembly and testing of...Temporary workWork experience placementWork at officeImmediate startFlexible hours$25 - $30 per hour
Electro-Mechanical Technician - 1st Shift Job Description As a Electro-Mechanical Technician... ...and tooling, working closely with engineers and other technicians to ensure each vehicle... .... Conduct basic mechanical and electrical integration, including installation of...Weekly payContract workTemporary workCasual workImmediate startRemote workFlexible hoursShift workDay shift- ...experience with basic hand tools and electronic tools. Requires Basic Electrical and Electronics formal education. Requires Formal Calibration... ...1, 2P051. American Society for Quality Certified Calibration Technician (ASQ-CCT). Nice to Have Skills & Experience Precision...
$21 per hour
...Protech Calibration Technician ApprenticeProtech Automotive Solutions and its affiliated brands is looking for highly talented, dedicated and quality-focused teammates to provide top tier service to our customers.In this paid apprenticeship you will be provided mentorship...Hourly payWeekly payApprenticeshipImmediate start- Electro-Mechanical Technician Role Summary Our company is seeking an experienced and skilled Electro... ..., and troubleshoot any mechanical or electrical issues that arise during the process. Collaborate with design and engineering teams to ensure that all specifications and...Full timePart time
- ...Electrician Technician Instructor (63285)California Chula Vista UEI - Chula Vista, CA 91911OverviewSalary Range $30.00 - $35.00 Hourly Category Instructors & EducationDescriptionWe're looking for someone with tenacity, passion, discipline and grit to join our team as...Hourly payFull timePart time
$25 - $40 per hour
...Electrical Technician - San Diego, CA - Immediately HiringJob DescriptionAs an Electrical Technician, you will be responsible for inspecting, testing, repairing, and troubleshooting electrical equipment at our shipyard facility and occasionally onboard vessels. You will...Contract workTemporary workImmediate startFlexible hoursNight shiftDay shiftAfternoon shift$37.76 - $39.11 per hour
...Electrical Technician (Test & Trials)Installs electrical equipment in accordance with applicable standards. Mounts equipment on foundations, cabinets, routes/runs cables and completes all electrical connections to equipment. Performs all commissioning and testing functions...Hourly payLocal areaFlexible hoursShift work- ...Electrical TechnicianThe Electrical Technician will perform scheduled and corrective maintenance, integration, testing, field installation, and troubleshooting of electrical equipment and systems. Work primarily occurs at URC in San Diego and will require travel to various...Hourly payFull timeWork at office
- ...Job Description Job Description Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional...
- ...SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and...Full timeWork experience placementLocal area
$25 - $35 per hour
...Description RASIRC is seeking a passionate and dynamic Cleanroom Electrical Technician to join our team and drive innovation in our Manufacturing... .... Analyze and record test results. Collaborate with engineers and quality personnel in continuous improvement activities....Permanent employment$51.31 - $65 per hour
...TechnicianThe Project Electrician/Process Controls/Instrumentation Technician will work on activities related to the NAVFAC Environmental... ...NABKey Responsibilities/Accountabilities:Perform low-voltage electrical connect/disconnect workInstall and remove electrical, control,...Hourly pay$90.73k
...Electrical & Instrumentation Technician 1st Shift (6am - 4pm) Job Summary We are seeking an experienced Electrical & Instrumentation (E&I) Technician to support the maintenance, troubleshooting, repair, installation, and calibration of electrical and instrumentation...Weekly payPermanent employmentAll shiftsFlexible hoursShift workNight shiftDay shift$71.52k - $89.4k
...Location: Colorado Springs, CO Onsite What this job involves The Electrical Technician performs essential planned preventative maintenance (PPM),... ...schedules for mechanical and electrical systems, ensuring engineering standards are maintained to maximize plant reliability and...Daily paidContract workFor contractorsWork experience placementFor subcontractorLocal areaShift workNight shift$90.73k
...Electrical & Instrumentation Technician We are seeking an experienced Electrical & Instrumentation (E&I) Technician to support the maintenance, troubleshooting, repair, installation, and calibration of electrical and instrumentation systems within a large industrial...Permanent employmentAll shiftsFlexible hoursShift workNight shiftDay shift- ...Job Title: Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component: Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting...Temporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Engineering Technician. Be the first to apply!
Related searches
- electrical engineer technician San Diego, CA
- electrical equipment technician San Diego, CA
- electrical systems technician San Diego, CA
- residential electrical apprentice San Diego, CA
- electrical controls San Diego, CA
- electrical testing San Diego, CA
- electrical field service engineer San Diego, CA
- electrical apprenticeship San Diego, CA
- commercial electrical San Diego, CA
- technician electrical San Diego, CA


