Process Engineering Specialist
Optimal CAE
Position Title: Process Engineering Specialist Position Description:
Support Manufacturing Process Engineering activity for Final Assembly
Drive continuous improvement in safety, quality and productivity
Apply engineering principles and analytical techniques to establish and continuously improve manufacturing processes and products
Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes
Lead and conduct process audits to ensure process discipline is consistent with Vehicle Operations guidelines
Conduct job ergonomic evaluations and deliver corrective actions as required
Analyze vehicle inventory root causes; engage in mapping and corrective actions to reduce vehicle inventory
Create process and instruction sheets supporting quality methods and processes
Deliver capable processes and tools for Trim and Chassis Assembly operations
Lead role in resolving assembly related concerns. Lead variability reduction and lean manufacturing initiatives and best practices
Ensure compliance to Plant, Corporate, Governmental and Environmental standards
Support ISO 14001 compliance and support internal ISO auditing and compliance as required
Support continuous improvement in safety, quality and productivity in Chassis and/or Trim areas
Identify throughput constraints and drive root cause improvements Skills Required:
Process Validation
MS Excel & PowerPoint
Problem solving skills
Data analysis
Paint experience
Green belt trained
UAW experience
Team Player Experience Required:
5+ years of related experience
Successful candidate must be able to demonstrate leadership behaviors combined with outstanding interpersonal, teambuilding, and communication skills Experience Preferred:
Effective oral and written communication skills
Lean Manufacturing and Six Sigma experience
8D and 5Why corrective action and problem solving skills
Lean Tools - 5S, Kanban, Poka-yoke, and Value Stream Mapping
DMAIC and DMADV (DFSS) Project Methodology experience
TQM and Kaizen Methods
FMEA, PPAP, and DOEs experience
Visual Factory Management
Ergonomic analysis knowledge and experience Education Required:
High School Diploma / GED Education Preferred:
Education: Bachelor's degree in Engineering Additional Information:
Onsite Use of AI Technology:
Unless expressly authorized in the interview/skill set validation instructions, candidates may not use AI tools or other third-party assistance during an interview or assessment to generate or provide substantive answers to interview questions. Candidates should answer organically in their own words, drawing on their own knowledge, skills, and experience. Failure to adhere to these expectations may result in the candidate being removed from consideration
Support Manufacturing Process Engineering activity for Final Assembly
Drive continuous improvement in safety, quality and productivity
Apply engineering principles and analytical techniques to establish and continuously improve manufacturing processes and products
Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes
Lead and conduct process audits to ensure process discipline is consistent with Vehicle Operations guidelines
Conduct job ergonomic evaluations and deliver corrective actions as required
Analyze vehicle inventory root causes; engage in mapping and corrective actions to reduce vehicle inventory
Create process and instruction sheets supporting quality methods and processes
Deliver capable processes and tools for Trim and Chassis Assembly operations
Lead role in resolving assembly related concerns. Lead variability reduction and lean manufacturing initiatives and best practices
Ensure compliance to Plant, Corporate, Governmental and Environmental standards
Support ISO 14001 compliance and support internal ISO auditing and compliance as required
Support continuous improvement in safety, quality and productivity in Chassis and/or Trim areas
Identify throughput constraints and drive root cause improvements Skills Required:
Process Validation
MS Excel & PowerPoint
Problem solving skills
Data analysis
Paint experience
Green belt trained
UAW experience
Team Player Experience Required:
5+ years of related experience
Successful candidate must be able to demonstrate leadership behaviors combined with outstanding interpersonal, teambuilding, and communication skills Experience Preferred:
Effective oral and written communication skills
Lean Manufacturing and Six Sigma experience
8D and 5Why corrective action and problem solving skills
Lean Tools - 5S, Kanban, Poka-yoke, and Value Stream Mapping
DMAIC and DMADV (DFSS) Project Methodology experience
TQM and Kaizen Methods
FMEA, PPAP, and DOEs experience
Visual Factory Management
Ergonomic analysis knowledge and experience Education Required:
High School Diploma / GED Education Preferred:
Education: Bachelor's degree in Engineering Additional Information:
Onsite Use of AI Technology:
Unless expressly authorized in the interview/skill set validation instructions, candidates may not use AI tools or other third-party assistance during an interview or assessment to generate or provide substantive answers to interview questions. Candidates should answer organically in their own words, drawing on their own knowledge, skills, and experience. Failure to adhere to these expectations may result in the candidate being removed from consideration
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Process Engineering Specialist in Wayne, MI vacancy
- ...Onsite Romulus, Michigan, United States of America Full time JR-202623748 Job Description The Role: The Process Engineer will develop, implement, and improve manufacturing processes, equipment, tooling, and operations to support safe, efficient production...SuggestedFull timeLocal areaWork from homeRelocation packageShift work
- ...Job Description Job Description Description: Job Title: Process Engineer Department: Engineering Reports To: Plant Manager / Engineering Manager Required Education: ~ Technical Electronics Degree or equivalent or 5 Years Related Experience Summary...SuggestedWork at office
- Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy’s nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear...SuggestedContract workApprenticeshipWork at office
$130k
...anywhere in the US near a major airport The consultancy Fire protection and life safety consulting engineering firm Growing its process safety team, with food manufacturing a big sector for the firm Salaried roles with flexible schedules, and...SuggestedRemote jobVisa sponsorshipFlexible hours- Product Development Program Manager This role carries broad ownership across a single vehicle program, encompassing program planning, control, studio, prototype, and launch phases. It operates as an individual…Suggested
- ...assisting the plant ergonomics program by partnering with production, engineering, safety, medical, labor, and plant leadership to identify and... ...injury and medical trends, supporting new-model launches and process changes, and ensuring compliance with ergonomics standards....Work experience placementWork at officeImmediate start
$75k - $85k
...Job Summary MacLean-Fogg is seeking a Process Engineer for our Farmington Hills, MI manufacturing facility. In this role, you'll optimize manufacturing processes, troubleshoot equipment and process challenges, and implement improvements that enhance product quality...Full timeTemporary workMonday to FridayShift workDay shiftAfternoon shift- ...R&D Operations & Transformation Analyst We are seeking a Process Engineer to join our Operations Team and drive modernization across our growing R&D organization. This is a unique opportunity to make a meaningful impact on how a dynamic R&D organization operates...For contractorsFlexible hours
- ...Job Description Job Description Position Description: The Process Engineer - Ergonomist assists the plant ergonomics program at Michigan Assembly Plant, partnering with production, engineering, safety, medical, labor, and plant leadership to identify and reduce...Temporary workWork at office
- ...Process Engineer We are looking for a Process Engineer for our Plymouth, MI facility. In this role you will be a subject matter expert on the products and manufacturing processes within the Plymouth Manufacturing Site. You will support the day-to-day powder manufacturing...Contract workFor contractors
- ...Process Engineer Develop assembly plans for the launch of new products and manufacturing processes. Develop and maintain General Assembly PFMEA and Control Plans for all process steps. Coordinate launch activities with Plant Engineering and Vehicle Engineering teams...Relocation
- ...Medical Process Engineer At Materialise Medical, we believe that better healthcare starts with solutions designed around the individual patient. If you're passionate about bringing personalized care to every patient, you'll love being a part of this team. Through the...
$72.48k - $121.44k
...In this position... You will apply engineering principles & analytical techniques to establish and continuously improve manufacturing processes and products. What you'll do... Support Manufacturing Process Engineering activity for Assembly Processes Drive...InternshipImmediate startFlexible hours- ...Process Engineer Plymouth, Michigan, United States Evaluates existing processes and configures manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process. Include the following: Other duties may be assigned...Immediate start
$74.3k
...around the world, we’re constantly developing new technologies and processes to further increase our efficiency. You'll get the satisfaction... ...an exciting opportunity to contribute to the manufacture of engines at Ford’s Engine and Transmission Plants. You will work to...Full timeImmediate startFlexible hours$106k - $145k
...Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary A CMP (Chemical Mechanical Polishing) Process Engineer is responsible for the critical semiconductor manufacturing step of planarizing the wafer surface. This is achieved through a...Hourly payPermanent employmentFull timeImmediate startShift work- ...Description Job Description Description To define optimal molding processes for products and train technical teams on achieving same... ...Knowledge and Expertise Minimum of an Associate’s Degree in Engineering or equivalent experience along with the knowledge, skill and...
- ...Skills Required: Program Management, Change control , Cost engineering. Mandatory Client Systems Needed as of Day One: WERS Experience... ...facilities, and track inventory to mitigate obsolescence. Process initial and change control releases for unique supplier-owned...Work at office
$99.1k - $166.2k
...world's most iconic brands. Learn more at this position... This engineer authors and maintains the backbone of Ford Energy's quality V-... ...you need a reasonable accommodation for the online application process due to a disability, please call (***) ***-****.This position...Casual workWork at officeImmediate startFlexible hours- Cybersecurity Key Provisioning Process EngineerJob#: 3059355Job Description:Position Description:We are seeking a Cybersecurity Key Provisioning Process Engineer to join our Product Cybersecurity organization. This role sits at the intersection of automotive engineering...
- ...Job Description Job Description Manufacturing Engineer About our client: Our client is a manufacturer and supplier of engineered... ...is responsible for leading and optimizing manufacturing processes within our production facilities. This role offers an exciting...Full timeContract work
- ...Job Description Job Description Senior Manufacturing Engineer About our client: Our client is a manufacturer and supplier of... ...Manufacturing Engineer leads new product introductions, manufacturing process development, customer Design Quality Reviews (DQRs), and...Full timeContract work
- ...looking for:Yazaki is looking for a Supervisor to join our Core EDS Engineering team in Canton, MI. Working in alignment with the Engineering... ...guide an engineering team to develop and support engineering processes, tools and resource management through training, technical...
- ...Job Description Job Description Project Engineer Job Description The engineering position requires experience designing industrial... ...of any working knowledge of designing/operating paint process ventilation equipment within the Automotive and non-automotive...For contractorsWork at officeFlexible hours
- ...Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: Process Execution & Technical Expertise Execute and oversee cell manufacturing... ...knowledge Escalate issues appropriately and partner with engineering to resolve root causes Quality & Documentation Ensure...Immediate startShift work
$98k - $147k
Job-ID: 43288Category: Engineering/Tech/QualityLocation: Canton, MI, United States; Columbus, OH, United StatesSchedule: Full time, DayPosted... ...(SAT), ensuring equipment meets established quality and process capability requirements, including Cpk of at least 1.33.Establish...Full time- ...with ability to travel Position Summary The Automation Engineer will work to support the technical services within SMS group to... ...welders, CNC machines, saws, and other equipment used in part processing.You may also be required to perform routine PLC and hard drive...Remote work
$35 - $44 per hour
...Afternoon shift, 3-11pm. CNC Process Engineer Description Job Description Summary Support Machining activities and problem solving in machining lines including Cylinder Head Machining, but not excluding other Machining Dept opportunities. Work will include daily...Hourly payContract workTemporary workShift workAfternoon shift- ...Description Job Description This role requires a hands-on engineer who is equally effective on the plant floor and at supplier sites... ...specification to stable production and can work across Cell Process Development, Manufacturing, Quality, Facilities, Controls/MES,...Local area
$70.48k - $179.09k
...Summary Samsung Austin Semiconductor is seeking an equipment engineer interested in working alongside a talented team of professionals with a key focus on establishing and maintaining world class process/equipment and implementing yield enhancement as a competitive...Hourly payFull timeImmediate startVisa sponsorshipShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Process Engineering Specialist. Be the first to apply!





