OTR Lease Operator
$2,500 - $3,500 per weekACA Truck Leasing
Looking to increase your earning potential? Our Lease Operator/Purchase program may be what you're looking for. No credit check, low refundable security deposit, walk-away lease. We take care of all the maintenance for a modest rate per mile.
TRUCK LEASE
- Full service leases - we maintain the equipment for a modest cost per mile
- 2023-2025 Tractors: Various makes and models available
- Comfortably equipped cabs and full-size sleepers
- All our trucks are equipped with an APU/EPU, inverter, fridge/freezer, TV mount, and microwave cabinet
COMPENSATION
$1.90 - $2.45 per mile paid to YOU
$2,500 - $3,500 weekly take home pay
Quarterly safety bonus
Light loads = Better fuel mileage
3,000 - 4,000 miles per week
FREIGHT
- 60% Dedicated Contractual Freight
- Loaded trailers ready for pickup in Spartanburg, SC
- No waiting to get loaded or unloaded
- Loads go throughout the lower 48 states
- Backhauls include vehicles and light weight "hotshot" freight
- No tarps or chains required- just straps
DISCOUNTS BENEFITS
GREAT fuel discounts - Comdata fuel card and pay card
IFTA calculated and filed for you
Liability Cargo insurance 100% paid by carrier
Low-cost bobtail and physical damage insurance
No trailer fees or any other crazy fees
$95 weekly carrier fee - period!
Rider and pets are welcome (restrictions apply)
QUALIFICATIONS
Valid Class-A CDL with good MVR and PSP
Solid work history - No more than 6 jobs in the past 3 years
5-years tractor trailer experience - preferably some open-deck and/or auto hauler experience
No DUI, careless or reckless driving violations within past 5 years
No electronic hand-held device violations
No felonies (minor offenses will be reviewed)
Ability to drive at night if load requires it
Unable to accept SAP drivers
Vacancy posted 20 hours ago
Similar jobs that could be interesting for youBased on the OTR Lease Operator in East Bethel, Anoka County, MN vacancy
$2,500 - $3,500 per week
...ACA Truck Leasing is searching for highly motivated, experienced,professional truck operators willing to stay out on the road 14 days at atime. You may have opportunities to take some 10+ hour breaks at thehouse, depending on where you live. No steering wheel holders justlooking...SuggestedWeekly payNight shiftACA Truck Leasing
Andover, MN16 hours ago$18 - $22 per hour
...Job Description Job Description Job Title: Saw Operator - 2nd shift $18-22/hr Job Description This role operates a large outdoor industrial saw to cut wood and lumber according to precise measurements while supporting continuous production on an evening shift...SuggestedWeekly payPermanent employmentTemporary workWork at officeMonday to ThursdayShift workAfternoon shiftAerotek
Cedar, MN6 days ago- Role Summary The Fundraising Manager leads the development and execution of fundraising strategies to support the organization’s growth and sustainability. This role focuses on building donor relationships, driving campaigns, and strengthening fundraising systems....Suggested
The Rescue Crew Inc
Andover, MN5 days ago $17 per hour
...caretakers play a crucial role in ensuring the health, productivity, and overall wellness of our insect colonies which are vital to our operations. The successful candidate will join a motivated team dedicated to maintaining high care and production efficiency standards....SuggestedFull timeThe Bug Company
Bethel, MN22 days ago- Job Description Job Description Established in 1993, artifex/millwork, inc. is an industry leader dedicated to the manufacturing of custom commercial furniture, architectural millwork, and retail fixtures. We have built a solid reputation with our customers over our...SuggestedSummer workCurrently hiring
artifex/millwork, inc.
Wyoming, MN18 days ago $17 per hour
...Job Description Job Description Support for Production Operators Location: Hellertown, PA 18055 Employment Type: Full-Time, On-Site Environment: Hot, Humid, Dusty, fast-paced The Bug Company is currently seeking a dedicated and hardworking individual to...Full timeShift workThe Bug Company
Bethel, MN12 days ago$25 - $35 per hour
CNC Machinist (Mon-Thurs) Aggressive Hydraulics is a custom hydraulic cylinder manufacturer. We are the leading provider of hydraulic solutions, serving a diverse range of industries. With a commitment to excellence and customer satisfaction, we pride ourselves on delivering...Hourly payFull timeMonday to ThursdayShift workAggressive Hydraulics Inc
Cedar, MN3 days ago$18 - $19 per hour
...Saw Operator - 2nd Shift This role operates a large outdoor industrial saw to cut wood and lumber according to precise measurements while supporting continuous production on an evening shift schedule. You will handle material loading, perform accurate measurements,...Permanent employmentTemporary workMonday to ThursdayShift workAfternoon shift$18 - $19 per hour
...Job Description Job Description Job Title: Saw Operator Catcher/Picker - 2nd shift M-Th 3:30pm-1am - $18-21/hr Job Description This role supports saw operations in an outdoor lumber yard by catching or picking and handling material as it is cut, assisting with...Weekly payPermanent employmentTemporary workWork at officeMonday to ThursdayNight shiftAfternoon shiftAerotek
Cedar, MN6 days ago$21.25 - $26.13 per hour
...Duties Join us as we empower the world to work out, creating healthier lives together. About the Opportunity: JOB PURPOSE: Operate robots according to job guidelines in efficient, productive and safe manner. ESSENTIAL JOB FUNCTIONS: Operate robots and...Hourly payFull timeTemporary workLocal areaShift workAfternoon shiftLife Fitness
Anoka, MN2 days ago- ...Oven Operator (Entry Level) Doherty Staffing Solutions is hiring Oven Operators for a leading supplier in the polymer industry located in Anoka, MN. If you enjoy a fast-paced environment and want reliable hours with weekly pay, this job could be a great fit. Read below...Weekly payTemporary workLocal areaShift workAfternoon shift
$21 - $24 per hour
...Saw Operator / Material Handler This role combines saw operation and material handling in a clean, organized, and climate-controlled manufacturing environment. You will spend roughly half of your time operating a saw to cut material and the other half operating a sit...Weekly payFull timeContract workTemporary workWork at office$21 - $24 per hour
...Saw Operator / Material Handler This role combines saw operation and material handling in a clean, organized, and climate-controlled manufacturing environment. You will spend roughly half of your time operating a saw to cut material and the other half operating a sit...Full timeContract workTemporary work- ...assembly, MultiSource is your one-stop-shop for quality, efficiency, and excellence in manufacturing. JOB DESCRIPTION: Sets-up, operates, and verifies the quality of work on a wide variety of CNC Milling machines involving close tolerances and difficult set-ups....Contract workMonday to FridayDay shiftAfternoon shift
MultiSource Mfg
Anoka, MN17 days ago - ...Equipment Operator The Equipment Operator is responsible for learning all aspects of the material handler (excavator) operation, end loader and other equipment to safely move material throughout our yard including inspection, and routine maintenance. Also required...Shift work
Alter Trading
Anoka, MN3 days ago $20.5 - $22.75 per hour
...appearance and meet quality standards. Measure and cut metal to specified lengths using a tape measure and appropriate cutting tools. Operate fabrication equipment such as brake presses and spot welders after receiving proper training. Perform buffing operations to...Permanent employmentTemporary workWork experience placement$20 - $28 per hour
...Machine Set Up Operator This role is ideal for hands-on, mechanically minded individuals who enjoy working with equipment, solving problems, and seeing the results of their work every day. You will learn how to set up and run ACME screw machines and industrial cold...Contract workTemporary work- ...Press Operator We are seeking Press Operators to join our team in Wyoming, MN. As a Press Operator, you will be responsible for maintaining plastic injection molding machines. Operate both automatic and manual presses that make large plastic pieces. Trim, inspect,...Shift workWeekend workDay shiftAfternoon shift
- Machine Operator- 1st Shift Anoka, MN 55303 Industry: Skills Job Number: 44236208 Pay Rate: $20.00 / hour Job Description Apply Now: Apply Online Apply Later Masterson StaffingDay shift
$24.62 per hour
...Charger / Operator The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities...Full timeImmediate startShift workWeekend work$14.8 - $27.5 per hour
...our customers with inventive electrical solutions. Primary Objective Of Position To set up, adjust, maintain and efficiently operate laser systems and manual, NC, CNC Presses and Cutting machines. Use computerized manufacturing technologies to lead and guide the initial...Hourly payMinimum wageFull timeTemporary workWork experience placementLocal areaFlexible hours- ...Job Opportunity: Experienced Plastic Injection Molding Press Operators Masterson Staffing is looking to hire full-time experienced plastic injection molding press operators in Wyoming, MN! Weekly pay, 40 hours/week, 10-hour days. Responsibilities: Operate a press...Weekly payFull timeShift workDay shift
$18 per hour
Job Description Job Description Salary: $18 Are you looking to get in the carpentry industry? 24Restore is an industry leading restoration company in Ramsey, MN. We specialize in emergency clean up restoration caused from Fire, Water, Mold, Biohazard & Storms....ApprenticeshipMonday to Friday24Restore
Anoka, MN12 days ago- ...Programmer to join our team. In this role, you will be responsible for developing and optimizing CNC programs for precision machining operations. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a...
Rotary Systems Inc
Anoka, MN21 days ago - ...Job Description We are looking for a skilled CNC Lathe Machinist to join our team. This position is for someone who can set up, operate, and inspect parts on CNC turning equipment in a job shop environment. Dagry is a precision machine shop in Owatonna, MN. We...Full timeRelocation package
Xepot LLC
Anoka, MN11 days ago $26 - $32 per hour
...Job Description Job Description Job Title: CNC Swiss Operator Job Description This role focuses on running long-run production on CNC Citizen Swiss machines in a small to mid-sized precision machining shop. You will primarily work with aluminum and occasionally...Weekly payContract workTemporary workWork at officeAerotek
Anoka, MN8 days ago$37.44k - $52k
...environment you need to succeed and advance. Serious Inquires Only Key Responsibilities Complete Setup from Scratch: Set up and operate CNC machines (Mills, Lathes, Swiss, and Mill-Turn) by following setup sheets, selecting correct tooling, and establishing accurate...Full timeTemporary workAll shiftsShift workNight shiftWeekend workDay shiftAfternoon shiftJ&J Machine Inc.
Anoka, MN13 days ago- ...Job Description Job Description Position Summary Brake Press Operator will be responsible for plans, lays out, and performing all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances....Contract workWork at officeMonday to ThursdayShift workAfternoon shift
rms Company
Anoka, MN1 day ago $24.42 - $44.42 per hour
...connecting and protecting our customers with inventive electrical solutions. Join our team as a Machinist to support our Anoka HOFFMAN Operations to support 2nd shift. Fabricate precision parts, fixtures, and gauges from samples, prints, drawings, sketches, and oral...Hourly payMinimum wageFull timeTemporary workFor contractorsWork at officeLocal areaWorldwideFlexible hoursAfternoon shiftnVent
Anoka, MN5 days ago$20 - $29.89 per hour
...Production Operator - 2nd Shift Anoka, MN ( Job Type Full-time Description Do you enjoy hands-on work, learning different production processes, and being part of a team that takes pride in quality? At Mate Precision Technologies, we Respect, Support, and...Full timeTemporary workShift workAfternoon shiftMate Precision Technologies
Anoka, MN4 days ago
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to OTR Lease Operator. Be the first to apply!
