Corrosion Technician

Job Description Description Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnership’s midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnership’s fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Summary This position will apply corrosion knowledge and skills to repair, install, troubleshoot, analyze, and perform other predictive and preventative maintenance tasks on assigned equipment, facilities, systems and associated devices contained withingas and liquid facilities and pipelines. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: Under general direction, provide for installation, operation, inspection and maintenance of the cathodic protection systems within an assigned segment of the pipeline system or facilities in a reliable and efficient manner while in compliance with the Partnership’s procedures and regulatory requirements. Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.). Investigates and analyzes corrosive conditions for existing and/or proposed facilities. Responsible for corrosion control and associated compliance of cathodically protected pipelines or facilities, and other buried, submerged, or above ground facilities. Proactively conduct pipe-to-soil potential surveys, casing-to-soil readings, rectifier and bond readings, current flows on pipeline, and foreign pipe-to-soil readings and all other structures under cathodic protection on a frequency as stated in Company procedures or meet regulatory requirements and document in the corrosion database or other forms, records or reports. Evaluate protective coating condition including internal, external and atmospheric systems and make repairs as needed, and evaluate pipe anomalies in accordance with established procedures. Inspect surface corrosion/pitting that is discovered during pipeline maintenance activities such as pipeline recoats and exposure repairs. Have an understanding of pipeline internal corrosion mechanisms and related mitigation measures. Generate and maintain the reports covering rectifiers, bonds, pipeline isolation and annual corrosion control reports. Install, maintain, troubleshoot, or assist with rectifiers, anode systems, cables, bonds, test stations, and related field equipment. Recognize the potential for stray currents from other sources (i.e., traction systems, coal mines, AC transmission lines, etc.) and take the necessary action(s) to bring concerns to supervisor. Read and interpret pipeline maps, as-builts, drawings, schematics, facility diagrams, or similar technical documents. Communicate with other Corrosion Technicians, Specialists or Supervisors for assistance in effecting repairs when applicable. Actively participate in PHMSA or State regulatory audits. Dependent upon position level, ability to train others in discipline job tasks and to confirm knowledge, skills and abilities of others as an evaluator for partnership skill qualification program. Must display workmanship consistent with Company procedures, industry standards, partnership work practices, applicable codes and/or engineering drawings and sketches. Ensure facilities, grounds, and work areas are maintained in a safe, orderly, and functional manner Comply with partnership safety policies and procedures. Perform energy isolation lockout/tagout procedures (LOTO).Must use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (arc flash protective PPE, respirator, hard hat, safety glasses, etc.). Required Skills Required Education High school diploma or GED Required Experience Level C requires a minimum of 0 – 2 years of relevant industry experience or equivalent work experience Level B requires a minimum of 2 – 6 years of relevant industry experience or equivalent work experience Level A requires a minimum of 6+ years of relevant industry experience or equivalent work experience and NACE CP CP2 & one of the following: NACE CIP 1 CP Interference Internal Corrosion Level 1 Relevant experience may include corrosion, cathodic protection, pipeline operations, electrical, instrumentation, mechanical maintenance, measurement, construction, industrial field service, or other oil and gas experience that demonstrates transferable skills Required Qualifications Must maintain valid driver’s license in state of residency Ability to use computers, mobile devices, and common business applications to complete records, reports, email, and training; proficiency with MS Office Suite products is preferred. Ability to train other technicians and/or administer operator qualifications testing may be required for advanced job levels; candidates may develop this capability after demonstrating required knowledge, skills, and Company qualifications. Preferred Qualifications Associate of Applied Science – Corrosion Technology NACE/AMPP CP 1 or greater preferred; equivalent corrosion, cathodic protection, electrical, instrumentation, pipeline maintenance, or oil and gas field experience may be considered. Coating Inspector Program Level 1 or greater preferred; equivalent coating, inspection, pipeline maintenance, construction, mechanical, or industrial field experience may be considered. Internal Corrosion Level 1 or greater preferred; equivalent chemical treatment, production, measurement, sampling/testing, pipeline operations, or other oil and gas field experience may be considered. Knowledge or experience working in American Innovations PCS, Bullhorn Web, and other Corrosion related software. Working Conditions and Requirements The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Frequent exposure to heat, cold, and other adverse weather conditions. Working conditions may include confined spaces. Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 75 lbs with or without assistance. Walk up to 2 miles at a time. Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment. Reliable attendance at work. Occasional overnight travel may be required. Primary Location United States-TX-CORPUS CHRISTI Work Locations Corpus Christi TX Texaco Rd (100000899) 2829 Texaco Rd Corpus Christi 78402 Job Pipeline and Terminal Operations Schedule Regular Full-time Travel Yes, 75 % of the Time Job Posting Sep 16, 2026, 4:00:00 AM Sunoco is an equal opportunity employer and does not discriminate against qualified applicants on the basis of any actual or perceived legally protected characteristics under federal, state, or local law. To view a notice describing federal equal opportunity laws click here. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, please contact the EEO Coordinator at View phone number on click.appcast.io. This number is for reasonable accommodation requests only. #J-18808-Ljbffr