Welder Fitter 2nd & 3rd Shift

The Welder will perform torch and plasma cutting operations along with fitting tacking and MIG welding carbon steel in vee groove and full penetration bevel joints on a variety of parts. Must be qualified for 2G and 2F. Also expected to utilize shop equipment to cut punch drill grind blast and paint as required.

How You Will Help:

• Work from weld data sheet and procedures operation traveler prints and oral instructions.
• Use turntable or lathe for circular parts or use weld bench to set up fixtures or layout and build makeshift fixturing.
• Visually check parts in preparation for welding cleaning weld area of oil dirt rust and burrs.
• Check dimensions to ensure parts are within print dimensions.
• Prepare parts for welding using square tape or scale centering heads and compass components following weld parameters.
• Use temp sticks to ensure specified heat and weld components in one or multiple passes to produce welds with proper penetration free from burn through cracks porosity and heavy bead.
• Deburr and grind off slag and excessive weld as necessary.
• Repair defective welded parts using grinding wheels cutting wheels pencil grinders or chisels to remove material to root of imperfection or to base metal and re-weld according to weld specifications.
• Perform torch and plasma cutting on carbon steel.
• Use various measuring devices to ensure work is to print specification including but not limited to coordinate measuring machine machinist square micrometers verniers thread and plug gauges.
• Use crane dollies and carts to obtain and return material to and from storage area and move completed job to next operation.
• Store all tooling fixtures and additional point-of-use items in an organized manner in drawers on work bench etc. with proper labels color coding floor marking or other identifying mechanism.
• Maintain work area as well as machines tools and equipment to meet program requirements.
• Perform all job functions in accordance with established operating procedures.
• Identify and assist in remediation of any and all safety hazards in the work place.
• Perform other duties as directed by Team Leader/Supervisor.

What You Will Bring:

• Ability to lift 50 pounds
• Must be able to use measuring equipment such as measuring tapes verniers and calipers and read gauges.
• Must be able to be certified to operate a forklift and use hoists to pick up heavy parts.
• General computer skills

Shift Information

2nd Shift - 2:30pm to 1:00am
3rd Shift - 7:30pm to 6:00am