Circuit Design Engineer
Donatech
Position would require the candidate to be a W2 employee of Donatech.
US Citizenship Required.
• Design/Capture electrical schematics and guide the PCB board layouts.
• Perform electrical Worst Case Analysis and Electrical Parts Stress Analysis.
• Resolve test anomalies and troubleshooting, and generation, review and presentation of Product Certification, and also support system level testing. To be effective in this role, you will need:
• Experience supporting the technical evaluation of design and requirements verification.
• Experience in different phases of aerospace hardware development cycle.
• 3+ years professional experience. Basic Qualifications:
• Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education.
• Experience in Analog circuit design at the card/board level schematic and analysis. Desired Skills:
• Experience in Analog Circuit Design, Motor Controls, Control Theory, Avionics Electronics Design
• Experience with a combination of design, test, operations and systems engineering disciplines.
• Experience in schematic capture using Xpedition or similar tools.
• Experience with PSPICE, Saber or other electronics simulation tool experience.
• Experience performing electronics analysis (Worst Case Analysis, Electrical Parts Stress Analysis, Failure Modes and Effects Critical Analysis).
• Experience performing failure Investigation on electronic hardware (CCA, Unit, and System Level).
• Missile design experience or Electronics Design for Space
• Demonstrated good communication and presentation skills with the ability to articulate complex technical issues to peers, management, subcontractors and customers.
• Demonstrated ability to work in a fast-paced, dynamic, collaborative team environment and to build consensus among peers and effective relationships with team members.
• Demonstrated strong problem solving and conflict resolution skills.
• Adaptable to new situations and demonstrate self-initiative in solving complex problems.
• Able to work effectively in a diverse team environment.
US Citizenship Required.
• Design/Capture electrical schematics and guide the PCB board layouts.
• Perform electrical Worst Case Analysis and Electrical Parts Stress Analysis.
• Resolve test anomalies and troubleshooting, and generation, review and presentation of Product Certification, and also support system level testing. To be effective in this role, you will need:
• Experience supporting the technical evaluation of design and requirements verification.
• Experience in different phases of aerospace hardware development cycle.
• 3+ years professional experience. Basic Qualifications:
• Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education.
• Experience in Analog circuit design at the card/board level schematic and analysis. Desired Skills:
• Experience in Analog Circuit Design, Motor Controls, Control Theory, Avionics Electronics Design
• Experience with a combination of design, test, operations and systems engineering disciplines.
• Experience in schematic capture using Xpedition or similar tools.
• Experience with PSPICE, Saber or other electronics simulation tool experience.
• Experience performing electronics analysis (Worst Case Analysis, Electrical Parts Stress Analysis, Failure Modes and Effects Critical Analysis).
• Experience performing failure Investigation on electronic hardware (CCA, Unit, and System Level).
• Missile design experience or Electronics Design for Space
• Demonstrated good communication and presentation skills with the ability to articulate complex technical issues to peers, management, subcontractors and customers.
• Demonstrated ability to work in a fast-paced, dynamic, collaborative team environment and to build consensus among peers and effective relationships with team members.
• Demonstrated strong problem solving and conflict resolution skills.
• Adaptable to new situations and demonstrate self-initiative in solving complex problems.
• Able to work effectively in a diverse team environment.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Circuit Design Engineer in Littleton, CO vacancy
- ...Job Title: Circuit Design Engineer Location: Littleton, CO 80125 (Onsite) Employment Type: contract Job Description: As a Circuit Design Engineer, you will work on the development of a sophisticated state-of-the-art Avionics product in a world...SuggestedContract workFor subcontractor
$68.51 per hour
...detail is not meant to be must haves just a help for the Analog circuit design candidates. Development, Layout and design of PWM hardware... ...LRU testing for F-22, F-35 aircraft. As a Circuit Design Engineer, you will work on the development of a sophisticated state-of...SuggestedFor subcontractor- ...FPGA Design/Verification Engineer- Littleton/Waterton, CO Shift: 1st Shift Pay Rate: $80-$100/Hr. on W2 Description: The... ...Test, Integration, Software, Systems Architects and Digital Circuit designers to create leading edge products for future...SuggestedShift workDay shift
- ...ASIC & FPGA Development Engineer The selected candidate will be responsible for ASIC &... ...signal processing (DSP), high speed digital design, high speed communication and system-on-... ...Systems Architects, RF/Analog & Digital Circuit designers and ASIC/FPGA engineers to create...Suggested
- ...Design Engineer HBK Engineering is looking for a Design Engineer which offers the opportunity to be part of a project team consisting of professional engineers, project engineers and designers who are involved in the design, modification, and analysis of new and existing...SuggestedFull timeWork at officeLocal area
$120k - $155k
...Salary Range: $120,000–$155,000 RF DAS Design Engineer— DAS Integrators, LLC (Englewood, Colorado) Salary Range: $120,000–$155,000 About DAS Integrators, LLC DAS Integrators, LLC is a wireless infrastructure engineering firm based in Englewood, Colorado. We specialize...Local area- ...Job #: 148709 Title: Design Engineer Location: Littleton, CO Salary Range: 95.00 Position: Design Engineer Description: ENG- Design major components or portions of functional systems and technically advanced prototypes while supporting product development and manufacturing...Temporary workDay shift
- ...Description: Test Engineer - Designs major components or major portions of a functional system or technically advanced prototype promotional or specific products. Develop or improve products and facilitate manufacturing operations. Develops basic data and makes...Full timeDay shift
$80k - $100k
1 day ago Be among the first 25 applicants The Senior Design Engineer at Well Master is responsible for new product design, project management... .../experience highly preferred. ~ Experience with building circuit boards, sensors, and controls design is highly preferred. ~...Full timeTemporary work$79.3k - $147.3k
...Program, is seeking a Electrical Component Engineer to join our team in Denver, CO. You will... ...and work closely with survivability, designers, test and manufacturing engineers, agencies... ..., capacitors, diodes, integrated circuits (ICs), hybrids, crystals, crystal oscillators...Full timeContract workTemporary workWork experience placementFor subcontractorFlexible hours- ...resolution of issues such as conflicting design requirements, unsuitability of standard... ...products or components. Performs quality engineering reviews of design documentation for... ...resistors, capacitors, diodes, integrated circuits (ICs), hybrids, crystals, crystal oscillators...
- Description: ENG- Perform circuit design and schematic development for sophisticated avionics products within... ...& Job Requirements *Bachelor's degree in Electrical Engineering or related discipline, or equivalent experience/combined education...For subcontractorDay shift
$100k - $130k
...Description Company Description Join SEAKR Engineering, a leading-edge provider of advanced... ...a talented and highly motivated RF Design Engineer that will contribute to the development... ...: Design front-end RF signal-chain circuits and assemblies for space vehicle...Work at office- ...Position: FPGA Design/Verification Engineer Location: Littleton, CO About the Role We are seeking a highly motivated ASIC/FPGA Design Engineer to contribute to advanced research and development programs focused on next-generation high-performance...
$89.13 - $110 per hour
...Job #: 148005 Title: FPGA Design/Verification Engineer Location: Littleton, CO Salary Range: 89.13 Position: FPGA Description: ENG- Designs, develops, and verifies FPGA and ASIC solutions supporting space-based systems, including RTL development, simulation, and hardware...Hourly payContract workTemporary workDay shift$116.8k - $160k
...26 AWS Infrastructure Services owns the design, planning, delivery, and operation of all... ...team of software, hardware, and network engineers, supply chain specialists, security... ...diagrams, building operations, control circuits, industrial HVAC Preferred Qualifications...For contractorsWork at officeFlexible hours$85k - $186k
...Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies... ...through 765 kV. ECI has immediate openings for substation design engineers of all experience levels. Responsibilities include...Immediate startFlexible hours$93.4k - $126.1k
...SUMMARY Mortenson is currently seeking an experienced Design Phase Engineer II to translate owner’s project expectations into design drawings, specifications, and schedules, and provide financial cost documentation. Strong communication skills are necessary...Contract workFor subcontractorH1bWork at officeFlexible hours$84.1k - $113.5k
...Design Phase Engineer I and II SUMMARY Mortenson is currently seeking an experienced Design Phase Engineer I and II to translate owner’s project expectations into design drawings, specifications, and schedules, and provide financial cost documentation. Strong...Contract workFor subcontractorH1bWork at officeFlexible hours- ...York is seeking an FPGA Design Engineer to contribute to the development of FPGA solutions for York’s Avionics and Payload Engineering team. In this role, you will collaborate with electrical, software, systems, and test engineers, support architectural decisions, and...Full timeWork at office
$68.51 per hour
...Analog Circuit Design Engineer PGS Worldwide is seeking an Analog Circuit Design Engineer in Littleton, Colorado for a one-year onsite contract-to-hire role supporting a leading aerospace & defense company. This position will support the development of advanced avionics...Hourly payContract workFor subcontractorWorldwide- ...Control System Design Engineer Essential Functions Researches and selects control system peripherals. Performs as a lead Design Engineer in the production of controls systems design drawings, sequence of operations and submittals for lower to mid-level control...Work experience placement
$43 - $58 per hour
...Job Description Job Summary: This position is responsible for the delivery of engineering services, from conceptual design through construction completion of HVAC, Plumbing, and other contract services offered by the business. Essential Duties and Responsibilities...Hourly payContract workTemporary workFor contractorsWork experience placementInternshipWork at officeLocal areaMonday to Friday$80k - $122.2k
...Design Engineer - Substation The Design Engineer - Substation will perform substation design assignments including physical layout and protection & control systems while ensuring compliance with safety and construction standards. This role involves designing substation...Local area$78.9k - $105.2k
...your unique skill sets so you can fully realize your potential. Job Description PCI is seeking an experienced Design Engineer for its PCI Denver 583 operations based in Aurora, CO . This individual will be responsible for the following duties:...Contract workFor contractorsLocal areaFlexible hours$90k - $120k
...Design Engineer - Transmission Line At QISG, our Transmission Line teams play a vital role in the safe, reliable, and efficient delivery of power across communities and regions. We design, build, maintain, and upgrade high-voltage transmission infrastructure that supports...Local area$31.25 - $47 per hour
...Transportation Design Engineers (Entry to Mid-Level) (Denver, CO) About DJ&A DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Specializing in Transportation Design, Survey & Mapping, Sustainability...Hourly payFull timeWork at officeLocal areaRemote workFlexible hoursNight shift- ...Design Engineer Sandis is currently looking for a Design Engineer for our growing team. Our ideal candidate is located in the Denver Metropolitan area with experience in civil design, permitting, and applicable software applications including stormwater drainage programs...Flexible hours
- ...We're seeking intermediate design engineers with a broad background in environmental site remediation for federal and global private sector clients. Based anywhere in the United States, you'll work with other scientists, engineers, subject matter experts, and project...For contractorsFor subcontractorWork at officeRemote work
$105k - $150k
...What Your Day Will Look Like: Consor North America, Inc. (Consor) is seeking a talented and motivated Roadway Engineer to support the planning, design, and delivery of transportation infrastructure projects throughout Colorado. This position is ideal for an...Full timePart timeCasual workWork at officeLocal areaRemote workFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Circuit Design Engineer. Be the first to apply!
Related searches
- senior software design engineer Littleton, CO
- product design engineer Littleton, CO
- design engineer Littleton, CO
- data center design engineer Littleton, CO
- product engineer Littleton, CO
- digital design engineer Littleton, CO
- layout design engineer
- entry level asic design engineer
- embedded design engineer
- solidworks design engineer

