Welder II
San Bernardino Municipal Water Department
Welder II
Are you looking for an opportunity with the potential for professional growth and development? Consider joining the City of San Bernardino Municipal Water Department as a Welder II. The City of San Bernardino Municipal Water Department is seeking a self-starter able to work in a fast-paced environment performing skilled welding and pipefitting work in a variety of water system construction and maintenance activities and lead a small work crew.
The Welder II is the advanced journey/lead level class in the welding pipefitting series. The ideal candidate will have graduated from high school, or the equivalent, five years of journey level welding experience with journey level knowledge of water distribution and transmission pipelines, a State Water Resources Control Board Water Distribution Operator Grade 1 certificate, and a valid California Class "C" driver's license. The incumbent will also obtain and maintain an AWS 6G pipe welding certificate within twelve months after appointment.
Minimum Qualifications
Education: Graduation from high school or GED/equivalent, And Experience: Five (5) years of journey level welding experience with journey level knowledge of water distribution and transmission pipelines, And Certificate: Must have and maintain a valid California State Water Resources Control Board (SWRCB) Water Distribution Operator Grade 1 certificate at the time of application. Must submit a copy of the required certificate with application. Must obtain and maintain an AWS 6G pipe welding certificate within twelve months after appointment. Obtaining and maintaining required certification is a condition of employment. Failure to obtain and maintain any required certifications noted within the stipulated timeframes shall be considered grounds for termination. The responsibility for obtaining and maintaining certifications is the sole responsibility of the employee.
Necessary Special Requirements
Possession of a valid California Class "C" driver's license required upon application. Note: For out-of-state applicants, a valid driver's license is required and a valid California Class "C" driver's license must be obtained within ten (10) days of appointment (CA Vehicle Code 12505c). Must be clean shaven or trimmed facial hair in order to properly use personal respirators. Must pass a respirator medical exam and be physically able to wear respirator equipment. Must be able to work in enclosed spaces while wearing protective clothing under extreme temperatures and hazardous environment.
Physical Tasks and Environmental Conditions
Work involves exposure to potential physical harm, hazardous chemicals, and infectious disease including smoke, fumes, gas, treated water, high frequency noise, dirt, dust, grease, oil, chemicals, solvents and toxic agents. Incumbents need to be able to tolerate unpleasant odors, wet conditions, and uncomfortable climatic conditions. There is frequent need to stand, stoop, walk, crawl, climb, and perform other similar actions during the course of the workday. Incumbents require sufficient mobility to work in a field setting in varying weather conditions, to operate hand tools and mechanical and motorized equipment, to transport materials and supplies weighing up to 75 pounds, and to travel to various locations. Must be able to see in the normal visual range with or without correction with vision sufficient to see color and read small print as well as distance. Must be able to hear in the normal audio range with or without correction. Employee accommodations for physical or mental disabilities will be considered on a case-by-case basis.
San Bernardino Municipal Water Department$30 - $50 per hour
Retrofit Technology, LLC is looking for an experienced Pipe Welder based in Bloomington, California. The role involves fabricating and installing piping systems for HVAC applications, requiring proficiency in various welding methods and the ability to read mechanical drawings...SuggestedHourly payDaily paid$22 - $42 per hour
...Fabricator / Welder Depot Connect International (DCI) Location: Bloomington, CA Pay Range: $22.00 $42.00 per hour (based on experience) Build More Than Parts Build a Career at DCI Depot Connect International (DCI) is a global leader in Tank Trailer and ISO Tank...SuggestedHourly pay$31 - $40 per hour
...HMI A division of The Management Trust Position Title: Residential Construction Technician II Location: Riverside, CA Reporting To: VP of Operations Status: Non-Exempt, Full-Time Salary: $31 - $40/Hourly DOE EMPLOYEE OWNER POSITION PURPOSE: We...SuggestedHourly payFull timeWork at officeMonday to Friday- Kelso Industries in Bloomington, California, is seeking an experienced Pipe Welder to support HVAC retrofit projects across Southern California. This role involves welding and assembling piping systems for commercial applications while prioritizing safety and quality standards...SuggestedHourly payDaily paid
$20.4 - $28.1 per hour
...always dependable, and our associates are the driving force behind this commitment. White Cap is hiring immediately for a Fabricator II! Do you want to help build America's skyline and your own future? White Cap is North America's leading distributor for...SuggestedHourly payFor contractorsImmediate startShift work$32 - $35 per hour
...Job Description Job Description Job Title: Maintenance Tech II Job Description We are seeking a skilled Maintenance Tech II... ...will work amidst machines such as Punch Presses, Break Presses, Welders, and Paint Equipment. Be prepared for high noise levels and contact...Weekly payContract workTemporary workWork at office$19.95 - $37.99 per hour
...Warehouse Service Technician II Job Category: Facilities Requisition Number: WAREH045665 Location: Rialto, CA 92376, USA Shift Schedule: (must be flexible) Monday-Friday 1) 6am-2:30pm 2) 3pm-11:30pm Hourly Range: $19.95 USD to $37.99 USD Rate: $24...Hourly payFull timeTemporary workPart timeSeasonal workWorldwideMonday to FridayFlexible hoursShift workNight shiftWeekend work$32 - $35 per hour
...Job Description Job Description Job Title: Maintenance Tech II Job Description We are seeking a skilled Maintenance Tech II... ...will work amidst machines such as Punch Presses, Break Presses, Welders, and Paint Equipment. Be prepared for high noise levels and contact...Weekly payFull timeContract workTemporary workWork at office$30 - $50 per hour
...maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care, backed by certified welders, electricians, and service technicians. About The Role We are seeking an experienced Pipe Welder to join our growing team and...Hourly payDaily paidFor contractorsLocal areaNight shift- An established transportation solutions provider is seeking a Service Technician II to perform diagnostics and repairs on transit buses. This role involves troubleshooting mechanical and electrical systems, conducting inspections, and assisting in training entry-level...
- ...divh2Maintenance Technician II/h2pJob Title - Maintenance Technician II/ppPerforms a wide range of facilities services tasks including technical maintenance of structural, plumbing, electrical, heating, ventilation, and/or air conditioning facilities and equipment, at...For contractorsWork at officeLocal area
$34.65 - $42.35 per hour
OnTrac is hiring a Fleet Maintenance Technician II Are you eager to join a dynamic and expanding company where you can both learn and make a meaningful impact? If you possess a strong sense of empathy, enjoy assisting others, thrive in a fast-paced environment, and excel...Work experience placementMonday to FridayFlexible hoursShift workWeekend work- ...Maintenance Technician II As a Maintenance Technician II, you will use your skills to support Manufacturing or Distribution Operations in repairing and maintaining material handling equipment, pneumatic systems, and compressors, sensors, and other devices throughout...Apprenticeship
$1,000 per month
...Auto Maintenance Technician II Looking for a workplace led by ethical leaders who genuinely invest in your growth? At Cox, we put people first and support careers that are built to last! Work Schedule: Sunday - Thursday (Mon-Thurs 9-5:30, Sun 6am-2:30pm) New Hires...Full time$23 - $27 per hour
Position Summary The General Assembly Technician II is a fully qualified assembler who independently performs standard mechanical and electrical assembly operations. This role requires the ability to read and follow drawings and work instructions without supervision, maintain...Hourly payLocal areaDay shift$23 - $27 per hour
ENC - ElDorado National California Inc. is hiring a General Assembly Technician II in Riverside, California. In this role, you'll perform mechanical and electrical assembly operations while maintaining quality standards. Candidates should have 2-4 years of relevant experience...Hourly payDay shift$22 - $42 per hour
A global leader in Tank Services is seeking tanker and trailer mechanics with cryogenic experience for the Bloomington, CA branch. This position offers competitive pay ranging from $22 to $42 per hour, with skill-based reviews every 6 months. Candidates should be equipped...Hourly pay- ...Material Handler II A Material Handler II operates various Light Industrial vehicles and/or RF devices to perform material handling assignments such as picking bulk orders, loading/unloading, and shipping/receiving of merchandise. Essential Job Functions Operate...Hourly payFull timeTemporary workFlexible hoursNight shift
- ...Material Handler II A Material Handler II operates various Light Industrial vehicles and/or RF devices to perform material handling assignments such as picking bulk orders, loading/unloading, and shipping/receiving of merchandise. Essential Job Functions Operate...Hourly payFull timeTemporary workFlexible hoursNight shift
$26 per hour
Now hiring Robotic Welder Location: Riverside, CA Pay Rate: $26.00 per hour Shift: Monday - Friday, 6:00 AM to 2:30 PM Steel Sweat And Skill Turn Into Real Paychecks Ready to take your welding game to the next level? Join us in Riverside and work with a crew that's serious...Hourly payFor contractorsLocal areaImmediate startMonday to FridayShift work$20 - $25 per hour
Job Posting Location: 2625 S Willow Ave, Bloomington, CA, 92316-3258, United States Base Pay: $20.00 - $25.00 / Hour Job Category: Shop Employee Type: Full-Time Non-Exempt Required Degree: NONE Manage Others: No Minimum Experience: 2 Years Wadco ...Full timeAfternoon shift$18.3 - $24.5 per hour
A position at White Cap isn't your ordinary job. You'll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities. The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable...Hourly payFor contractorsImmediate startShift work$26 per hour
A staffing agency in Riverside, CA is seeking a Robotic Welder to program and operate robotic welding systems. The ideal candidate should have at least 2 years of experience in welding and a high school diploma or GED. Responsibilities include utilizing welding principles...Hourly payWeekly payDay shift- ...~ High School Diploma or GED ~ Good driving record ~ Prefer Hunter Combo Fundamental/Intermediate Alignment Level I. Level II and Introduction to Advanced Driver Assist Systems a plus Benefits and Perks Excellent Training and Development Competitive...Full time
$32 - $48 per hour
...Field Technician II Electric Power Systems (EPS) is a NETA-accredited independent electrical testing and engineering organization specializing in electrical acceptance testing, commissioning, and maintenance for clients across Data Centers, Utility, Generation, Renewables...Hourly pay$30 - $36 per hour
Overview Job Summary: The Service Technician II is responsible for performing intermediate-level diagnostics, repairs, and part replacements on transit buses with limited supervision. This role supports the OEM service and warranty team by executing campaign repairs, assisting...Hourly payLocal areaNight shift$36.51 per hour
...enhance peoples' lives through our products and presence in the communities in which we operate. JOB SUMMARY The Maintenance Mechanic II will learn to troubleshoot, correctly define root cause, and implement corrective actions safely on a variety of machine systems....Contract workApprenticeshipWork at office$25 - $30 per hour
Energy Jobline ZR is seeking a skilled TIG Welder in Riverside, California. The ideal candidate will have a minimum of 3+ years of TIG welding experience, proficient in stainless steel and thin-gauge materials. The role focuses on performing precise TIG welding, interpreting...Hourly pay$25 - $30 per hour
TIG Welder - $25-$30/hour DOE Key Responsibilities: Perform TIG welding on stainless steel and various metals Read and interpret blueprints, drawings, and welding symbols Set up and operate TIG welding equipment and tools Inspect completed welds for quality, accuracy...- ...Job Description Job Description WE ARE SEEKING AN EXPERIENCED WELDER/FABRICATOR THE WELDER/FABRICATOR WILL BUILD STANDARD AND CUSTOMIZED TRUCK BODIES AND EQUIPMENT AND WILL ALSO BE ABLE TO WORK WITH OTHER COMPONENTS TO MAKE SURE DELIVERY IS ON TIME. RESPONSIBILITIES...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder II. Be the first to apply!



