Aerospace Finishing Maintenance Supervisor - Day Shift

Aerospace Finishing Maintenance Supervisor - Day Shift Country United States of America State / County Washington City Kent Division Aerostructures Company Protective Coatings Function Maintenance Workplace Type On-Site Position type Full Time Opportunity ID 23093 Job Description Located in Kent Washington , Protective Coatings Inc. is a leading provider of full service finishing for the aerospace, electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies, phenolics, polyurethanes, polyesters, elastomerics, intumescents, lacquers, alkyds, acrylics, dry-film lubricants, and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else. Founded in 1976, Protective Coatings Inc. was later acquired by Precision Castparts in 2012, and became part of the Aerostructures Division. As a defense contractor Protective Coatings Inc. is registered with the Directorate of Defense Trade Controls as a subsidiary of Precision Castparts Corp and is fully compliant with all relevant facets of the International Traffic in Arms Regulations and the Export Administration Regulations. Founded in 1976, Protective Coatings Inc. was later acquired by Precision Castparts in 2012, and became part of the Aerostructures Division. As a defense contractor Protective Coatings Inc. is registered with the Directorate of Defense Trade Controls as a subsidiary of Precision Castparts Corp and is fully compliant with all relevant facets of the International Traffic in Arms Regulations and the Export Administration Regulations. Position Summary: The Maintenance Supervisor will conduct analysis to identify and implement continual improvement activities; and represent the Company with our customers, suppliers, and certifying agencies. The Maintenance Supervisor shall be familiar with all operating systems including; shot peening machinery and equipment maintenance, paint component mixing systems, HVAC systems, air compressors and dryers, and rectifier systems, to name a few. The supervisor will be expected to perform welding applications such as stick, MIG and TIG welding, and will provide for special tooling concepts and fabrications. Other responsibilities will include maintenance and installation of monitoring and control equipment such as temperature controls, metering systems, and electrical heating and timer systems for production tanks. The supervisor will be expected to mentor and train lower level technicians, facilitate, and give direction for the Facilities department based on production needs. Candidates must have the ability and desire to be flexible and adaptable in a fast-paced production environment, be resourceful and innovative along with presenting a strong business ethic and compliance to leadership and company policies, and a good communicator with the ability to represent the company in a positive manner. Reporting Relationships: The Maintenance Supervisor will report to the Maintenance Manager. Primary Duties & Responsibilities: Ensuring the integrity of all processing tanks are maintained in the highest order and reporting any discrepancies to both Production and Quality Management Ensuring the mechanical equipment, i.e. the overhead crane, air compressors, company-owned vehicles, air lines, etc. are maintained in good, safe, working order at all times Working with outside contractors, as authorized, to maintain the working condition of company-owned equipment Maintaining the cleanliness of paint booths and filters as required Ensuring the safety of the processing and office areas at all times, i.e. inspection of duck boards, air lines, water lines, etc. and repair those items as required and/or directed by Production and/or Quality Management Conveys materials from storage or work sites to designated area. Secures lifting attachments to materials and conveys load to destination by forklift or crane. Operates forklift or crane to assist in loading or moving materials and products. Other duties and responsibilities as assigned. Safely operates facilities equipment such as power tools, hoists, cranes, forklifts, and scissor lifts. Complete knowledge and maintenance of entire facilities systems including; powder coating system, In-line paint mixing system, vapor degreaser, solvent distiller system, HVAC systems, plating/anodize rectifier systems, processing tank electric heater and timer systems, shot peen machines, and NDT on-demand hot water system. Operation of production facilities equipment including: ovens, dryer and oven controls, immersion tanks and controls, air compressors, and paint booths and make-up air units. Orders and inventories materials, tools, accessories, and parts to support production facility departments, machinery, and equipment. Performs equipment maintenance on such items as air compressors Performs plumbing and maintenance to facilities water piping systems. Knowledge and performance of electrical work to facilities and machinery. Perform repairs and service maintenance of machinery and equipment. Studies production schedules, and estimates repair and work completion to better schedule around production. Visually inspects and tests machinery and equipment. Will be exposed to various cleaning and production chemicals/odors and occasional fumes, wet/humid conditions (indoors), outside weather conditions, and moderate noise level. Develop maintenance procedures and ensure implementation. Conduct inspections of the facility to identify and resolve issues. Plan and oversee all repair and installation activities. Familiarity in drafting and understanding blueprints and schematics Frequently is required to sit or stand, reach with hands and arms, and balance. Frequently lift and/or move up to 35 pounds. Frequently exposed to airborne particles. Occasionally works near moving mechanical parts and in outside weather conditions. Computer skills and experience with MS Suite and Maintenance PM Software Ability to work alone or as a member of a team, good cooperative skills. Ability to direct, train, and mentor employees. Required Skills: Picks up debris from plant grounds and maintains area Loads/unloads materials onto/from pallets, barrels, racks, and shelves by hand, forklift Operates forklift to assist in loading or moving materials and products Proficient in Confined Space Forklift Operation Basic Cleaning Tools (Broom, Push Broom, Shovel, Mop, etc.) Area Cleanliness/Organization (6S) Meets Productivity Goals Follow Instructions Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one with supervisors, other employees of the Company. Ability to apply common sense understanding to carry out simple one- or two-step instructions. Ability to deal with standardized situations with only occasional or no variables. Regularly required to walk and talk or hear, push, pull and lift. Regularly lift and/or move up to 35 pounds. Frequently is required to sit or stand, reach with hands and arms, and balance. Frequently lift and/or move up to 35 pounds. Frequently exposed to airborne particles. Occasionally works near moving mechanical parts and in outside weather conditions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and depth perception. The noise level in the work environment is usually loud. Must be detail oriented and quick learner. Good communicator with ability to represent the Company in a positive manner. Excellent vision (whether or not corrected) including normal color vision. Computer skills and experience with MS Suite. Analytical thinking and problem solving skills. Knowledge in the interpretation and development of both electrical and mechanical schematics and drawings. Ability to work alone or as a member of a team, good cooperative skills. Ability to direct, train, and mentor employees. Ability to apply concepts of basic algebra and geometry. Understanding of complete Facilities layout including; waste treatment pumps and mixers, plating and anodize tank plumbing and rinse water systems, facilities electrical panels and feeders, and overhead sprinkler water systems. Systems familiarity of entire facility which include: dust collection systems, chemical fume scrubbers, chemical tank chiller system, abrasive blast systems, powder coating system, In-line paint mixing system, vapor degreaser, solvent distiller system, HVAC systems, plating/anodize rectifier systems, processing tank electric heater and timer systems, shot peen machines, and NDT on-demand hot water system. Required Experience: Proven experience in a leadership role Knowledge of basic accounting and finance principles Excellent verbal and written communication skills Excellent organizational and leadership skills Analytical/critical thinking 5+ years of experience in maintenance, preferably in aerospace chemical processing/finishing Level of Education: High school diploma or general education degree (GED) BS/BA in facility management, engineering, business administration or relevant field preferred 7 years related experience and/or training; or equivalent combination of education and experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For informational purposes only, the range of pay for this role is $90000 to $115000 US Dollar (USD) Salaried based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 2X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 120 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid. Precision Castparts Corp