AIRCRAFT MECHANIC

Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a crew chief and technical authority, having custody of anassigned aircraft, with primary responsibility for performing, coordinating, and/or overseeing the maintenance andperiodic inspections to the assigned aircraft. Responsibilities - Serves as crew chief of assigned aircraft, responsible for performing, coordinating, and/or overseeing maintenance on the aircraft. - Performs aircraft inspections including preflight, postflight, phase, and other scheduled and unscheduled inspections. - Diagnoses and identifies probable locations of malfunctions from the cockpit during engine run-up. Progressively engages or turns on all systems operated by cockpit controls. - Initiates requests for unscheduled tools, equipment, and materials during preparation for flight. - Utilizes safety practices and procedures following established safety rules and regulations and maintains a safeand clean work area. Requirements Conditions of Employment Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800, Aircraft Overhaul Group, Aircraft Mechanic. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a WG-8852 AIRCRAFT MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the theory, operation, and integration of all mechanical, pneudraulic, electrical, electronic, and other operating systems of a variety of aircraft. Knowledge of the startup, operation, shutdown, and emergency procedures for the systems and the aircraft; symptoms of normal and abnormal operation; and the inter-relationships between operating systems. 2. Knowledge of associated trades such as sheet metal, painting, aircraft electrical, electronics, and aircraft engine work. Knowledge of safety regulations, practices, and procedures. 3. Knowledge of supply procedures, the publication order system, and documentation procedures. 4. Skill to check all functional and support systems, operate engine(s), determine what systems are malfunctioning; and search repair directives, technical orders, and manuals to determine repairs needed. 5. Skill in the use of all tools of the trade, test equipment, test stands, power sources, cockpit instruments, gauges, and controls. Skill in the operation of diagnostic and on-board electronic equipment/systems to identify proper and improper operation of aircraft systems, components, and parts. 6. Ability to analyze guidelines, maintenance modification orders, to determine material, equipment and personnel needs and to perform technical reviews of guides to locate discrepancies or propose improvements to methods or specifications. Physical Effort: The work requires moderate to strenuous effort. Must climb, bend, stoop, crawl, and stand for prolonged periods on concrete or metal surfaces. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally may lift and carry items that weigh about 50 pounds with mechanical lifting devices or with assistance from other workers. Working Conditions: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. May be exposed to intake suction and hot exhaust blast. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. Education Additional Information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here. If you have questions regarding this announcement and have hearing or speech difficulties click here.