Plumber

Grand Canyon University! One of Arizona's leading institutions of higher learning. Located in the Valley of Sun in the heart of Phoenix, Arizona, GCU is an institutionally accredited, private, nondenominational Christian University.

What you will do:

• Assembles, installs, and repairs pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.
• Studies building plans and working drawings to determine work aids required and sequence of installations.
• Inspects structure to ascertain obstructions to be avoided to prevent weakening of structure resulting from installation of pipe.
• Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors.
• Cuts openings in walls and floors to accommodate pipe and pipe fittings.
• Cuts and threads pipe.
• Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass and lead, and nonmetals, such as glass, vitrified clay, and plastic.
• Joins pipes by use of screws, bolts, fittings, solder, plastic solvent, and caulks joints.
• Fills pipe system with water or air and reads pressure gauges to determine whether system is leaking.
• Installs and repairs plumbing fixtures such as sinks, commodes, bathtubs, water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners.
• Repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains.
• Welds holding fixtures to steel structural members.
• Assists in planning of preventative maintenance schedule for all plumbing systems and schedules work schedule to accommodate maintenance activities.
• Ensures all work complies with building and safety codes and environmental protection requirements.
• Ensures all work meets requirements as specified by the manufacturer of systems.
• Part of a rotating list of on-call personnel.

What you need:

Knowledge, Skills and Abilities :

• Must have sufficient knowledge of water distribution and waste water disposal for commercial buildings.
• Must have sufficient knowledge of relevant building codes, legislation, regulations, policies and procedures installation and maintenance.
• Must demonstrate a strong knowledge in the correct usage of tools, power tools, and equipment as related to plumbing systems.
• Must have the physical skills and endurance to move about campus and the buildings in order to fulfill daily maintenance tasks and activities.
• Self- motivated and shows initiative to start and complete tasks.
• Must be familiar with, and follow, safety requirements and precautions.
• Detail oriented with good troubleshooting skills.
• Must be able to present professional demeanor in all interactions.
• Good communications skills with a good command of the English language
• Fluency in Spanish is helpful but not required.
• Willing to respond to emergency requests outside of normal work hours.
• Willingness to work weekends, holidays, or extended hours as needed.
• Must have own transportation to be able to go to all GCU owned and/or leased buildings (Tempe, Scottsdale, etc.).
• Must have own tools.
• Must be willing to operate work ticketing system and update to be able to inform status of work.
• Must be willing to participate in rotating on call schedules.
• Ability to pass background investigations.
• This position requires a 40-hour work week schedule; also, may request over time as needed.

Education and/or Experience :

Required Qualifications :

• High school diploma or GED equivalent.
• Minimum of 5 years' experience working as a plumber for commercial firm .
• Valid driver's license and clean driving record

Preferred Qualifications:

• Professional certification/License
• Technical Trade schooling

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The following physical demands are estimated by the amount of time spent. Usually, the amount of time spent will be estimated on a daily basis, but depending on the position could be estimated on a weekly basis or a monthly basis.

Constantly: 60%+ or 5-8 hrs/shift Occasionally: 10%-25% or 1-2 hrs/shift

Frequently: 25%-60% or 4-5 hrs/shift Rarely: less than 10% or less than 2 hrs/shift

• Work is characterized as non-sedentary 60% of the time requiring incumbents to be on their feet.
• Work constantly requires standing and movement.
• Work frequently requires kneeling, bending, stooping, reaching outward and upward, balancing, crouching, crawling, standing on ladders; frequently in awkward positions or close spaces to be able to reach pipes and/or fittings.
• Work occasionally requires pushing and pulling tools, equipment, machinery.
• Work occasionally requires lifting and carrying up to 75 pounds.
• Frequently requires feeling, grasping, holding and handling various tools, including screwdrivers, power tools, and tool sizes; which requires manual dexerity.
• Work also requires occasionally move about the campus.
• Work constantly requires the ability to view and discern colors, shapes and materials such as electrical wiring.
• Work frequently requires the ability to read detailed instructions and/or requisitions.
• Work constantly requires the ability to read, follow and observe safety precautions.
• Constantly requires mental acuity to focus attention on specific task and activity; to review, assess, diagnose or troubleshoot repair issues; attention to detail for repair work.
• Occasionally may be exposed to smells associated with sewer and water, exposure to sounds associated with power tools and exposure to dust and other debris.

#INDLOPESUP