CNC Machinist 2nd Shift
$30 - $37 per hourCannonball Recruiting LLC
CNC Machinist
Pay: $30-37/hr.
Shift: 3pm to 1am (Mon-Thu)
Description:
- The CNC Machinist will set-up and operate CNC Mills & Lathes to fabricate metallic and non-metallic parts.
Requirements:
- Setup, and operate various CNC equipment with minimal supervision.
- Must have Proficient Knowledge of a variety of controls (Mazak, Fanuc, etc) with the ability to perform manual CNC program edits as required to complete job work scope.
- Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5.
- Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002” over 55” diameter.
- Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints.
- Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area.
- Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment.
- Document daily activities to assure performance in accordance with job standards.
Job Duties:
- Setup and operate CNC Mills/Lathes – Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc.
- Manufacture components within the allotted time estimates provided on job travelers.
- Ensure customer satisfaction with products and service.
- Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools.
Additional Qualifications:
The following skills and qualifications are a plus but are not required for this position:
- Mastercam Programming experience
- Experience working in an ISO-9001 or AS9100 Quality Environment
Benefits:
- Medical / Dental / Vision / Life Insurance
- Vacation / PTO
- 10-Paid Holidays
- 401k with company match
- Profit Sharing
- Clean, Climate-Controlled working environment
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the CNC Machinist 2nd Shift in Pennsylvania vacancy
$30 per hour
Description: Custom Engineering is currently seeking 2nd shift CNC Machinists to operate horizontal boring mills, vertical mills and bridge mills. Up to $30.00 per hour BOE (Includes $2.00 Shift differential) Create a set up and remove workpieces from a machine per...Afternoon shiftHourly payShift workCustom Engineering Company
Erie, PA11 hours ago- ...CNC Machinist Programs, sets up, and operates CNC machinery to manufacture complex precision parts for drilling and geotechnical equipment, ensuring dimensional accuracy and quality. Essential Duties and Responsibilities: Program CNC machines using G-code and...Afternoon shift
Apex GeoTech Solutions
Brookville, PA2 days ago - ...CNC Machinist The key responsibilities of the CNC Machinist are: Set up and operate CNC machining centers and related equipment. Read and interpret engineering drawings, blueprints, work instructions, and specifications. Select and install tooling, fixtures...Afternoon shift
Michael Page
Morrisville, PA5 days ago - ...CNC Machinist Job Description: ~ CNC Mill / Lathe ~ CNC Mill / Turn ~ Multi-Axis Machine ~1st Shift - Monday through Friday, 7:00am to 3:30pm ~2nd Shift - Monday through Thursday, 5:30pm to 2:00am and Friday, 3:30pm to 12:00am. ~10% Shift Differential...Afternoon shiftMonday to FridayMonday to ThursdayShift workDay shift
21st Century Staffing
Hatfield, PA4 days ago - ...CNC MachinistCalling all night owls! Are you an experienced CNC Machinist who enjoys seeing your final product from start to finish? Come join CPV Manufacturing, as... ...performing job responsibilities.This position is 2nd shift Monday through Thursday 3:30pm - 1:30am with a...Afternoon shiftTemporary workMonday to FridayMonday to ThursdayShift workNight shift
CPV Manufacturing
Kennett Square, PA1 day ago $18 - $30 per hour
...Job Description Job Description Miller Brother Staffing is looking for CNC Machinists for a manufacturing company based in Meadville Pa. POSITION: CNC Machinist SHIFT: 1st shift, 2nd shift, 3rd shift. PAY: $18 - $30/hour SUMMARY DESCRIPTION:...Afternoon shiftTemporary workShift workNight shiftDay shiftMiller Brother Staffing
Meadville, PA17 days ago- ...CNC MachinistAs a CNC Machinist you will be responsible for working together with the team to manufacture low to medium quantity surgical instruments... ...5-Axis milling machines.Openings available on 1st and 2nd Shift.1st Shift: Monday - Friday 7:00am to 4:30pm 2nd Shift: Monday...Afternoon shiftMonday to FridayShift workDay shift
ARCH
Quakertown, PA1 day ago $30 - $40 per hour
...CNC MachinistPay: $30-40/hr.+ 10% shift differential for 2nd shift hoursShifts:1st (Mon-Fri) 7am-3:30pm2nd (Mon-Fri) 5:30pm-2amOT AvailabilityDescription:Cannonball Recruiting is seeking experienced CNC Machinists to fill multiple roles for production and job shop facilities...Afternoon shiftTemporary workShift workCannonball Recruiting LLC
Telford, PA1 day ago$39 - $40 per hour
Our client is seeking skilled and motivated CNC Operators to join their team! The ideal candidate will have experience with CNC Lathes, performing setups, and editing programs as needed. 2nd or 3rd shift available $39-40/hr with company medical benefits! This is an exciting...Afternoon shiftPermanent employmentTemporary workWork experience placementShift workNight shiftWeekend workRandstad
Harleysville, PA4 days ago- ...CNC Machinist Shift: 2nd/ 3rd Shift Summary We are seeking a CNC Machinist to set up and operate CNC machining centers used in the production of shelter components. This role is responsible for producing high-quality parts while following blueprints, work...Afternoon shiftShift workNight shift
Cannonball Recruiting LLC
Dallastown, PA1 day ago $25 - $50 per hour
...Description Manual / CNC Machinist Location: Lebanon, PA Employment Type: Full-Time, Hourly (Non-Exempt) About the... ...supervisors and coworkers Additional Details ~ Schedule: ~2nd Shift: 3:30 PM - 1:30AM, Monday-Thursday ~3rd Shift: 10:30 PM - 7...Afternoon shiftHourly payFull timeTemporary workFlexible hoursNight shiftMiratech
Lebanon, PA4 days ago$37.62 per hour
...We are seeking a CNC Machinistto join our federal team at ourYork, PAlocation.We're... ...Location: York, PA Navy Systems Plant Shift: 2nd Shift, Monday-Friday Pay: $37.62 per... ...: Navy Systems, York PA As a CNC Machinist, you will: Use tool preset machine...Afternoon shiftHourly payContract workMonday to FridayShift workJohnson Controls
York, PA4 days ago$35 - $45 per hour
...CNC Lathe MachinistThe CNC Lathe Machinist 2nd Shift will perform a variety of finish machining practices involved with turning, boring, drilling and threading while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate...Afternoon shiftBi-weekly payHourly payFull timeTrial periodShift workRotating Machinery Svcs, Inc.
Freemansburg, PA3 days ago- ...workplace where employees can build rewarding careers. As an Off-Shift CNC Machinist at CMC, you will be a key contributor in bringing our... ...reasonable accommodations in compliance with the American with Disabilities Act of 1990. 2nd/3rd Shift: Flexible Scheduling.Afternoon shiftTemporary work10 hours per weekFlexible hoursShift workNight shiftWeekend workDay shift
Cygnus Manufacturing Company LLC
Saxonburg, PA23 days ago $26 per hour
...Manual/CNC Machinist 1st and 2nd Shift Available $2,500 New Hire Bonus 2nd Shift +15% Differential Greiner Industries is seeking skilled Manual/CNC Machinist to produce and repair precision parts using manual or CNC machine tools. You'll work independently...Afternoon shiftContract workTemporary workFor contractorsWork at officeWeekend workDay shiftIES Communications
Pennsylvania4 days ago$38 per hour
...Job Description Job Description CNC Lathe MachinistParker Hannifin | Grantsburg... ...) 50-60 Hours Per Week Available 2nd & 3rd Shift Openings Duration: 6 Months-1 Year... ...seeking skilled and motivated CNC Lathe Machinists to join our manufacturing team in Grantsburg...Afternoon shiftHourly payWeekly payDaily paidContract workTemporary workWork at officeMonday to FridayShift workNight shiftAerotek
Pittsburgh, PA5 days ago- Eaton is seeking a CNC Machinist (Operator A) on 2nd shift in Glenolden, PA. You will set up and operate CNC mills and lathes, interpret blueprints, GD&T, and program NC machines. Strong attention to tool selection, inspection, and process improvement is essential. The...Afternoon shiftHourly payShift work
$26.5 per hour
Eaton Corporation is hiring a CNC Machinist (Operator A) for the 2nd Shift in Glenolden, PA. Responsibilities include interpreting blueprints, running CNC lathes and mills, and inspecting parts. The ideal candidate has a high school diploma and at least 3 years of machinist...Afternoon shiftHourly payShift work- ...Job Description CNC Machinist Victaulic World Headquarters - Easton, PA Full-Time | Corporate Engineering Research & Development... ...UP TO $10,000 ALONG WITH RELOCATION FOR THIS POSITION** 2nd shift opportunity. 4 day work week Monday-Thursday 2:30pm-12:30am...Afternoon shiftPermanent employmentFull timeContract workTemporary workFor contractorsH1bWorldwideRelocationTrial periodRelocation package
Victaulic
Easton, PA5 days ago $22 - $29 per hour
Pay: $22.00 to $29.00 hourly, plus 15% shift differential Hours: M to F, 2:00 pm to 10:... ...minimum experience programming and operating CNC machines. Ability to make parts from... ...to markup drawings as needed. Have basic machinist’s tools necessary to perform job...Afternoon shiftHourly payShift work$23 - $26 per hour
...on 06/08/2026 | Salary: $23.00 - $26.00 per hour | Shift: 2nd shift (3pm-12am) | Experience: 2+ years CNC Lathe machining preferred. Job Description We are seeking a highly skilled and motivated CNC Lathe Machinist to join our dynamic manufacturing team. In this role...Afternoon shiftHourly payShift work$36 per hour
...Job Description Career opportunities for skilled Machinists Job Description 2nd shift Career opportunities for skilled Machinists (hiring pay... ...Manual/Conventional Machinists. Hiring Expert-level CNC Machinists. Starting wage up to $36/hour (based on skills...Afternoon shiftTraineeshipRelocationRelocation packageShift workGulftech Group
Gettysburg, PA17 days ago$23 - $26 per hour
We’re hiring CNC Machinists for our precision defense manufacturing facility in Corry, PA . You’ll manufacture high-precision components... ...26/hr based on experience and machining capabilities +$2/hr 2nd-shift differential Overtime paid after 40 hours Additional compensation...Afternoon shiftRelocation packageMonday to FridayShift workDay shift- D&E Machining is currently seeking a CNC Lathe Operator with 2+ years of experience for full-time on 2nd shift. There is a substantial shift differential for 2nd shift employees. The ideal candidate will perform the day-to-day operation of the machining of customer parts...Afternoon shiftFull timeFlexible hoursShift work
$26.5 per hour
Eaton’s IS AER FED division is currently seeking a CNC Machinist (Operator A) - 2nd Shift in Glenolden, PA. Shift hours: 2PM - 11:15PM, Monday-Friday. Pay: $26.50 per hour plus a 15% shift premium. Responsibilities Interpret blueprints generated per ANSI/ASME Y14.5 guidelines...Afternoon shiftHourly payPermanent employmentVisa sponsorshipRelocation packageMonday to FridayShift work$26.5 per hour
Eaton’s IS AER FED division is currently seeking a CNC Machinist (Operator A) - 2nd Shift to join our team in Glenolden, PA! Our business is growing and we are looking to begin a 2nd shift to help support our CNC machining team. We are actively working to upgrade our equipment...Afternoon shiftHourly payPermanent employmentH1bLocal areaVisa sponsorshipRelocation packageShift work- ...characteristic protected by applicable laws, regulations and ordinances. Title CNC Mill Machinist Location Ivyland, PA (Onsite) - Milton Roy, 201 Ivyland Rd., Warminster, PA 18974 Shift 2nd Shift Mon - Fri (3:30 pm - 12 am), Direct Hire, Full‑time Role About Us...Afternoon shiftFull timeShift work
- ...and The Olympics Position Purpose The CNC Mill Machinist I is responsible for machining parts utilizing... ...their daily goals. Variety of Shifts Available Standard hours for 1st shift:... ...00 a.m. - 3:30 p.m. Standard hours for 2nd shift: Monday- Thursday 3:30 p.m. - 2:00...Afternoon shiftTemporary workLocal areaFlexible hoursShift workDay shift
$27 - $31 per hour
...$28.00/hour plus a $3.00/hour shift premium .) Full-Time | Ossian... ...The Opportunity If you're the machinist everyone turns to when a setup... ...career. We're looking for a Lead CNC Machinist who enjoys staying... ...4.00-$28.00/hour +$3.00/hour 2nd Shift Premium Comprehensive...Afternoon shiftFull timeShift work- ...CNC Set-Up Operator – Round Tool ManufacturingLocation: Reynoldsville, PAShift: 2nd Shift (2p to 10p, M - F)Employment Type: Full-Time; Permanent Department: Manufacturing /... ...clean, well-organized workplace where skilled machinists can thrive.Position OverviewThe Walter CNC...Afternoon shiftPermanent employmentFull time
Sandvik
Reynoldsville, PA1 day ago
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Machinist 2nd Shift. Be the first to apply!
Related searches