Electrical Mechanical Technician
$25 - $35 per hourQuad
Building Maintenance Technician – Building Systems
Pay Range: $25.00 – $35.00 / hour
Quad Sussex, WI is seeking a Building Maintenance Technician to support the upkeep and operation of facility building systems and infrastructure. This role focuses on maintaining HVAC, plumbing, utilities, and general building systems to ensure a safe and reliable work environment.
Candidates with general maintenance experience are encouraged to apply—HVAC or electrical experience is a plus, but not required.
Paid relocation may be available for highly qualified candidates located 100+ miles from the plant.
Why Join Quad
Competitive pay based on experience
Excellent benefits package
Strong team culture and supportive work environment
Schedule:
12-hour shifts (3 days one week, 4 days the next)
Rotating days every 4 months
Key Responsibilities
Building Systems & Maintenance
Perform routine maintenance and repairs on building systems including HVAC, plumbing, and utilities
Assist with maintaining heating, cooling, and ventilation systems
Support upkeep of refrigeration equipment such as coolers and air dryers
Help maintain water systems, including basic treatment and monitoring
General Facility Maintenance
Complete general building repairs such as:
Plumbing fixtures (toilets, sinks, drains)
Minor wall repairs, painting, and ceiling tile replacement
Roof leak patching and basic structural repairs
Maintain and repair doors, dock equipment, and other facility components
Equipment & Mechanical Support
Assist with maintenance of motors, compressors, pumps, and other mechanical equipment
Perform basic fabrication, repairs, and adjustments as needed
Grounds & Seasonal Work
Perform basic grounds maintenance and landscaping
Assist with snow removal and operate equipment as needed
Safety & Teamwork
Follow all safety policies and procedures
Keep work areas clean and organized
Work from maintenance schedules, service requests, and team priorities
Communicate effectively with team members and supervisors
Required Qualifications
High School Diploma or GED
1–3 years of maintenance, facilities, or related experience
Willingness to learn and take on a variety of maintenance tasks
Ability to work independently and as part of a team
Willingness to work overtime as needed
Required Skills
Basic mechanical aptitude and troubleshooting ability
Experience using hand and power tools safely
Ability to follow instructions and read basic technical information
Strong work ethic and reliability
Must provide own basic hand tools
Preferred Qualifications (Nice to Have)
Experience with HVAC, plumbing, or building systems
Basic electrical knowledge (motors, controls, or troubleshooting)
Experience in a manufacturing or industrial environment
Technical training or certifications in maintenance-related fields
Valid driver’s license (for snow removal equipment operation)
Physical Requirements
Ability to lift up to 50 lbs regularly and up to 75 lbs occasionally
Ability to stand, walk, bend, and reach for extended periods
Ability to work at heights and in confined spaces
Ability to work indoors and outdoors in varying conditions
Ability to work 12-hour shifts
$25 - $35 per hour
...Building Maintenance Technician – Building Systems Pay Range: $25.00 – $35.00 / hour... ...experience are encouraged to apply— HVAC or electrical experience is a plus, but not required... ...facility components Equipment & Mechanical Support Assist with maintenance of...SuggestedSeasonal workRelocation packageShift work3 days per week$25 - $35 per hour
...Building Maintenance Technician – Building SystemsPay Range: $25.00 – $35.00 / hourQuad... ...experience are encouraged to apply—HVAC or electrical experience is a plus, but not required.... ...other facility componentsEquipment & Mechanical SupportAssist with maintenance of motors...SuggestedSeasonal workRelocation packageShift work3 days per week$35.5 per hour
...Job Description Job Description Description: Now Hiring: Controls, Automation & Electrical Technician | 1st Shift Schedule: 6:00AM – 6:00PM | Alternative Work Schedule Pay: $35.50 (+ based on experience) Why join our team?? Need cash before payday?...SuggestedFull timeSeasonal workImmediate startDay shift- ...Mechanical Technician We are looking for a hardworking, mechanically inclined individual to join our maintenance and operations team as a Mechanical Technician. This hands-on role supports equipment maintenance, facility upkeep, production operations, and general site...SuggestedLocal area
- ...Manufacturing Technician Job Purpose And Reporting Structure: Under the direction of the Manufacturing... ...the employee is occasionally exposed to moving mechanical parts, outside weather conditions, and risk of electrical shock. The employee occasionally performs work-...SuggestedFor subcontractor
- DIRECT HIRE PLACEMENTS for Experienced Tool & Die Makers 1ST SHIFT AVAILABLE IN BUTLER, GRAFTON, CEDARBURG, OR MEQUON Leading sheet metal manufacturers hiring experienced Tool & Die Makers to help support production by building new stamping dies, weld, and gage fixtures...ApprenticeshipLocal areaImmediate startDay shift
- ...machinists, mold maintenance, and production technician personnel as needed. ESSENTIAL... ...problems with plastic injection moldings, mechanical maintenance systems and related... ...toxic or caustic chemicals and risk of electrical shock. The noise levels in the work environment...ApprenticeshipImmediate start
- Tool And Die Maker Kapco Inc. is looking for a Tool & Die Maker on 1st, 2nd, and Weekend shift at our Grafton, WI facility. If you are driven to succeed with a passion for the professional growth and development of others, our employee-focused company may have the right...Work experience placementRelocation packageWeekend workDay shiftAfternoon shift
- Tool & Die Maker 1st Shift (4-Day Workweek) ATACO Steel Products Corp is hiring an experienced Tool & Die Maker to support our metal stamping operations. This role focuses on building, repairing, and maintaining stamping dies, fixtures, and tooling to keep production...Temporary workApprenticeshipLocal areaDay shiftAfternoon shift
- Description Kapco Metal Stamping is the Midwest's premier contract manufacturer of metal components, trusted by some of the world's biggest brands to make precision metal parts. Kapco's constant investment in modern, state-of-the-art equipment and cutting-edge technology...Contract workWork experience placementRelocation packageWeekend workDay shiftAfternoon shift
- Skills • Ability to perform highly skilled duties in developing and building dies, jigs, and fixtures • Proficient in layout and bench and machine operations for constructing, altering, and repairing tools • Experience in Tool and Die Maintenance and Repair • Strong oversight...Local area
- Job TitleSome U.S. state privacy laws offer their residents specific consumer privacy rights, which we respect as described in our privacy statement. To opt-out of our making available to third parties information relating to cookies and similar technologies for advertising...
$30 per hour
...repairs across our two facilities Preferred Qualifications: Basic maintenance/repair skills (required) Basic plumbing/electrical knowledge (preferred) Experience performing maintenance/repairs in manufacturing facility (preferred) Bilingual English/...Weekly payWork at officeLocal areaShift workAfternoon shift- ...responsible for installing, maintaining, and troubleshooting electrical systems ranging from low-voltage controls up to 600 volts that... ...meters. Knowledge of Pneumatics and Hydraulics Knowledge of mechanical & equipment processes Completes Industrial Lift...ApprenticeshipLocal areaFlexible hoursDay shift
- ...Express Lube Technician Location: 5 Corners DCJR (Chrysler, Dodge, Jeep, Ram) Department: Service Reports To: Service Manager... ...Valid driver's license with a clean driving record. Basic mechanical aptitude and attention to detail. Ability to work efficiently...Temporary workRelocation
$30 - $36 per hour
...we can always create a better way. Industrial Maintenance Mechanic Location: Quad – Chemical Research & Technology (CR/T),... ...blueprints and technical drawings. Basic knowledge of industrial electrical systems and safe work practices. Ability to work at heights...Full timeLocal areaMonday to FridayShift workDay shift$32 - $42 per hour
...for ourselves and our clients. At our core, we're a company that believes we can always create a better way. Industrial Maintenance Mechanic $32.00 / –$42.00 /hour | Shift Positions Available Relocation Assistance Available for Qualified Candidates (100+ miles away) Are...Temporary workLocal areaRelocation packageShift workNight shift$34.5 - $39.5 per hour
...time Description Electromechanical Technician | 2nd Shift Germantown, WI... ...maintenance and process improvement of mechanical equipment, automated PLC's, robotics and... ...maintenance and troubleshooting for all electrical, mechanical and pneumatic systems to support...Full timeSeasonal workImmediate startMonday to FridayShift workAfternoon shift- ...PLCs in a fast-paced manufacturing facility to determine mechanical or electrical failure Responsible for complex troubleshooting of industrial... ...Electrician, Industrial Electrician, Electrical Technician or equivalent trade is preferred In lieu of a journey-level...Hourly payFull timeWork at officeRelocationRelocation package
- ...Do you have a background in industrial electrical, including PLC and AC/DC experience, and... ...The Electrical Maintenance Technician will: Perform regular and preventative... ...combustion controls. ~ Basic understanding of mechanical devices. ~ Strong communication skills...Full timeWork experience placementNight shift
- ...Responsibilities: As an Electrician, you will: ? Maintain Electrical Systems Install, inspect, troubleshoot, repair, and... ..., control systems, commercial kitchen equipment, and other mechanical systems throughout Cedar Community. ????? Troubleshoot &...Full timeLocal areaShift workRotating shiftDay shift
$20 per hour
...rewarding career with us. Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a Field Technician at Spectrum, you will be on the front lines, installing and repairing services and educating customers on their use. In this...ApprenticeshipWork experience placementLocal areaImmediate startVisa sponsorship- ...Manufacturing Technician Work for an industry leading casting manufacturer with a highly-competitive compensation and benefits package. Position - Manufacturing Techinician Job Location - Hartford, WI Starting Date - Immediate Need...Full timeTemporary workLocal areaImmediate startShift workNight shift
- ...Corporation is seeking a Manufacturing Technician to support daily manufacturing and warehouse... ...relevant experience in electronic or mechanical manufacturing environments ~ Diploma,... ..., work orders, mechanical drawings and electrical schematics to perform diagnostics and...Temporary work
$28 - $38 per hour
Tool & Die Maker Full-Time Menomonee Falls, WI, US Pay Range: $28 - $38 per hour Reich Tool & Design, a Menomonee Falls based, family-owned and operated Tool and Die manufacturer for 60 years is looking for an experienced Tool & Die Maker. The qualified candidate...Hourly payFull timeMonday to FridayFlexible hoursDay shift$26 - $32 per hour
Summary: Join a growing manufacturer in Jackson, WI as a Tool and Die Maker and put your completed Tool and Die apprenticeship and precision machining skills to work. Bring your experience building, repairing, and modifying complex tooling in a first shift role. Qualified...Hourly payApprenticeshipMonday to FridayDay shift- ...constructed tools, dies, fixtures, gauges, machine attachments and mechanisms. Job Description: Layout work and plan machining and... .... Demonstrated experience making visual, dimensional, electrical, or mechanical tests of materials, processes, assemblies, or...
$44.61 per hour
...metal work. Proficient in welding, Mig, Tig and Stick, Brazing, Soldering etc. Install, assemble, fabricate, maintain, and repair mechanical process piping systems. Maintain air handling equipment i.e. vacuum systems and ventilation systems. Utilizing Microsoft Office...Hourly payFull timePart timeWork at officeLocal areaImmediate startRelocationRelocation packageShift work- Corporate Overview Server Products is a highly regarded food and beverage technology company that manufactures products for the restaurant and food service markets. Server Products is committed to designing smarter solutions to everyday challenges so customers can...
- Summary As a member of the Tool and Die Department the Tool and Die Maker is responsible for building, repairing, and maintaining precision tools, dies, jigs, and fixtures of various application. This role requires expertise in machining and precision measurement ...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Mechanical Technician. Be the first to apply!
- electrical Cedarburg, WI
- electrical qualifier Cedarburg, WI
- electrical controls Cedarburg, WI
- electrical engineer technician
- electrical equipment technician
- entry level electrical engineering technician
- electrical systems technician
- electrical production technician
- electrical mechanic
- hiring electrical technician


