2nd Shift Painter

Painter

The Painter position is responsible for performing assigned duties related to the painting and packaging of speed reducers or gear boxes.

Essential Duties and Responsibilities

• Perform painting process for completed units for shipment according to established methods, procedures and standards.
• Inspect units to assure housings are free from lubricant and dirt prior to painting.
• Prepare units for painting by ensuring all shafts, bores, and oil seals are masked correctly from the paint process.
• Ensure unit nameplates and shafts are protected from exposure to paint.
• Ensure units move along the paint line smoothly to maintain productive flow of work.
• Ensure all unit surfaces are coated (both units painted on the line and units spray painted).
• Follow written instruction on method for keeping spray equipment clean and undamaged.
• Clean paint booth, paint filters and related equipment using chemicals as instructed.
• Operate overhead hoist.
• Keep accurate records of numbers and types of units painted.
• Perform some final assembly when applicable in accordance with engineering specifications.
• Inspect units to ensure that the unit is painted according to standards.
• Ensure all units are packed correctly using a one-piece flow method, to include accurately matching unit labels and box labels to units.
• Ensure each unit is packed in appropriate carton according to established methods, procedures and instructions for this process, to include packing unit using proper liner, foam packaging material and/or packing paper.
• Operate foam packing, strapping and tape machines.
• Assist Distribution department in preparation and shipment of finished goods as required.
• Comply with local, state and federal environmental regulations regarding the management of hazardous waste.
• Comply with local, state, and federal EHS regulations regarding proper labeling on secondary containers, chemical storage, maintaining job specific PPE which may include hearing protection and respiratory protection.
• Attend and comply with site specific EHS trainings and policies

Critical Competencies

• Demonstrated critical thinking and problem-solving skills, including a continuous improvement mindset. Exposure to lean manufacturing principles is a plus.
• Demonstrated attention to detail and accuracy.
• Strong work ethic, including the ability to be self-directed and self-motivated while taking initiative with projects and tasks.
• Demonstrated ability to work under pressure and at the necessary pace required to meet customer demand rates and production goals.
• Strong interpersonal, teamwork, and collaborative skills.
• Willingness to be flexible and adapt to changes in internal processes, delays, or unexpected events.
• Positive attitude with a demonstrated willingness to listen and learn.
• Demonstrated safety orientation and compliance mindset.
• Demonstrated pattern of reliability and dependability as related to attendance and work assignments.
• Proficiency in English language skills, including effective verbal and written communication.
• Willingness and ability to work occasional extended hours, including overtime and weekends based on business needs.

Education and Experience Requirements

• High School Diploma or GED from an accredited institution is required.
• Previous experience in a manufacturing environment is strongly desired.

Physical Demand and Work Environment:

Physical Demands: Potential physical demands include, but are not limited to: frequent walking, standing, twisting, carrying and handling; regular bending, stooping and kneeling; regular lifting up to 50 lbs.; occasional climbing, pushing and pulling. Potential sensory demands include but are not limited to: hearing and seeing. Incumbent will be required to complete and pass a respirator baseline and annual test for Powered-Air Purifying Respirator (PAPR). Must be able comply with requirements stated in OSHA 1910.134 Respiratory protection and Boston Gear's Respiratory Protection Procedure. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment: Majority of time is spent in a manufacturing production environment with some (but not all) climate-controlled areas. Personal protective safety equipment must be worn, and proper safety precautions must be observed. Potential exposure may include, but is not limited to: solvents, dusts, noise, heat, outside weather conditions, cramped spaces, and building construction areas.