Landscape Pipe Fitter
Haydon Building Corp
Haydon Pipefitting Position
Layout, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems.
Essential duties and responsibilities include the following. Other duties may be assigned.
- Plan pipe system layout, installation, or repair, according to specifications.
- Inspect, examine, or test installed systems or pipelines, using pressure gauge, hydrostatic testing, observation, or other methods.
- Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
- Measure and mark pipes for cutting or threading.
- Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
- Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
- Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
- Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
- Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
- Remove and replace worn components.
- Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
- Perform related duties and responsibilities as required.
To perform the job successfully, an individual should demonstrate the following competencies:
- Cooperation
- Communications
- Job Knowledge
- Problem Solving
- Achievement Focus
- Dependability
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Education and/or Experience: 3+ years related pipe fitting experience. Must possess a valid Arizona driver's license and have acceptable driving record that allows insurability under Earthscapes' insurance plan. Good verbal and reading skills, including the ability to read and apply the project plans and specifications, and installation instructions and clearly communicate with customers, suppliers, and other employees. Work within industry standards of accuracy. Possess a mechanical aptitude. Make decisions based on measurable criteria. Visualize objects in three-dimensions from plans and drawings. Requires exposure to cold, heat, noise, outdoors, confining workspace, electrical hazards, chemicals, dust, and mechanical hazards. Work easily and skillfully with hands.
Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and to use hands to type, handle, or feel and talk or hear. The employee is occasionally required to stand or walk. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. Lift and carry objects weighing up to 100 pounds occasionally and up to 60 pounds frequently.
Benefits at Haydon/Earthscapes: Health Options, Worklife Balance, Professional Development, Teamwork/Camaraderie, Retirement Planning
EEO Statement: Haydon Companies is an Equal Employment Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law.
Visa and Sponsorship: Candidates must have current and ongoing authorization to work in the United States without employer sponsorship. Except where expressly indicated in the job posting, the company is unable to sponsor or assume sponsorship of an employment visa at this time.
- ...including: Building (Commercial), Heavy Civil, Preconstruction, Landscape and Building Information Modeling. Haydon's unique full-service... ....com. SUMMARY Layout, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment...SuggestedTemporary workFor contractorsVisa sponsorshipWork visa
- As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentic Welder, Pipefitter...SuggestedFor contractors
- ...Job Description Job Description Pipe Fitter What You’ll Be Part Of You’ll be joining an industrial team supporting critical manufacturing and infrastructure operations, where safety, precision, and quality workmanship are essential. You’ll work alongside skilled...SuggestedShift work
- Job Description As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices...SuggestedWeekly payFull timeFor contractorsApprenticeshipLocal areaFlexible hours
$31 - $40 per hour
...Pipe WelderAs a Pipe Welder your expertise in welding will be pivotal in fabricating and joining metal pipes and components. Your skills will ensure the integrity and quality of welds in accordance with engineering specifications and industry standards. Safety is paramount...SuggestedContract workTemporary workShift work$25 - $40 per hour
...continual growth and improvement lie at the heart of RSCS core values. About the Opportunity RSCS is looking for experienced Pipe Welders to join our Refrigeration Construction team. This is a traveling field position for dependable welders who take pride in quality...Hourly payDaily paidRelocation$25 - $32 per hour
...expertise.Pay and Shift DetailsPay: $25-$32 Depending on ExperienceShift: 2nd shift 1:30pm - 10:30pmKey ResponsibilitiesPerform welding of piping systems up to 48 Ø using SMAW and FCAW equipmentPrepare, cut, bevel, and assemble pipe components using CNC pipe cutters and tube...Local areaShift workAfternoon shift- Express Employment is seeking a skilled Plumber/Pipefitter for residential service in the Phoenix area. The role focuses on delivering high-quality plumbing solutions, including diagnostics, repairs, and maintenance, while building strong customer relationships. The ideal...
$26.5 per hour
...4 years of plumbing experience Strong verbal and written communication skills Qualifications: Proof support own tools, including pipe wrenches Experience with tankless water heater maintenance (flushes required) Background with well-known residential service companies...Work at office- ...subcontractors, specializing in Design/Build, Industrial HVAC, Piping & Plumbing Systems, Service Maintenance, and Special / Facility... ...openings for experienced commercial/industrial Shop Pipe Welder / Pipe Fitter . This position works in a welding and fabrication shop...Weekly payFull timeTemporary workApprenticeshipFor subcontractorImmediate start
$20 - $40 per hour
Join Taskrabbit’s network as an independent plumbing service provider. Accept tasks that fit your experience, such as installing fixtures, unclogging drains, repairing leaks, and troubleshooting basic plumbing problems. Set your own rates and choose when and where to work...$150 per hour
...Installers for a retrofit project in a data center located out of state. The ideal candidates will possess expertise in handling copper pipe ProPress systems and be knowledgeable about Variable Refrigerant Flow (VRF) systems. Responsibilities Install and retrofit...Weekly payDaily paidContract workTemporary workWork from home- ...Responsibilities: Read and interpret drawings, blueprints, and specifications to determine layout requirements Cut openings for pipe in walls, floors, and ceilings using hand or power tools Measure, cut, thread, and bend pipe to required shape using hand and...Permanent employmentFull time
- ...systems. Installs these systems according to specifications and appropriate trade and building codes. These systems may consist of pipes, fittings, piping systems, fixtures and equipment for heating, cooling, gas, steam, lubricating, sprinkling, and industrial processing...Work at office
- ...alongside the crews and helping wherever needed. Daily Activities: Rigging Pipefitting Cutting, assembling and installing pipes Repairing malfunctions Testing pipe systems to ensure safety and functionality Grading Excavation Concrete...For contractorsLocal area
- ...a Pipefitter to join our team! In this role, you will be responsible for installing, assembling, fabricating, and maintaining the piping systems in a cleanroom. You will support all areas of piping needs. This is a full-time onsite position located in North Phoenix...Full timeApprenticeshipFor subcontractorWork at officeLocal area
$22 - $28 per hour
...role in commercial mechanical service and installation, progressing from entry-level assistance to master-level expertise in wet-side piping systems (hydronic heating, chilled water, steam, boilers, chillers, process piping) for buildings, hospitals, schools, and...Hourly payRelocation package- ...journeyman pipefitters or peers with the demolition, de-installation, rigging, fitting, and/or installation of equipment, supports, and pipe on site. Communicate clearly verbally, digitally, and in writing. Follow all safety rules and regulations. Proactively...ApprenticeshipImmediate startWeekend work
- ...seeking an experienced and safety-focused Pipefitter to support the installation, modification, testing, and commissioning of process piping and facility utility systems within a semiconductor manufacturing environment. This position is responsible for installing and...ApprenticeshipFor subcontractorLocal areaImmediate startShift workNight shiftWeekend work
$35 - $45 per hour
...0 per diem daily. 70+ hour work weeks. Job Description This role focuses on installing and retrofitting copper and steel piping systems in a data center environment in Abernathy, TX. You will work extensively with ProPress copper systems, Variable Refrigerant...Weekly payDaily paidContract workTemporary work- ...fabrication team. We are trying to fill both a day & a night shift. The ideal candidate has experience interpreting blueprints and piping diagrams, performing pipe takeoffs, measuring and preparing pipe, and fitting piping components for fabrication. This role requires...Weekly payWork at officeFlexible hoursNight shiftDay shift
$38 - $45 per hour
...HotFoot Recruiters is hiring an experienced TIG Pipe Welder to support Process Cooling Water (PCW) piping installation and hook-up activities at a major semiconductor construction project in North Phoenix, AZ. We are specifically seeking welders with hands-on TIG...Full timeImmediate startMonday to Friday- RSCS is seeking experienced Pipe Welders for a traveling field position in our Refrigeration Construction team. This role involves welding in shop and in the field on industrial ammonia and CO₂ refrigeration systems. The position requires 3-5 years of pipe welding experience...
$32 per hour
...craftsmen who take pride in quality workmanship, safety, and delivering infrastructure that lasts for generations. If you're skilled with pipe installation, fabrication, rigging, and solving problems in the field, we want to talk to you. What You'll Do Install,...Weekly payPermanent employmentContract workTemporary workMonday to FridayDay shift- ...Insight Global in Glendale, AZ is hiring for an 18-month contract role in mechanical piping and fire-protection assembly. The position installs piping, fittings, devices, and supports per drawings and work instructions. You'll verify orientation, follow torque specs,...Contract work
- ...information, please see: Position performs routine duties while operating required equipment to move, weld, and apply certification stamp to pipe. Position requires knowledge of all welding processes and acceptable standards set by the industry. **RESPONSIBILITIES:** Manually...
- The Welder is responsible for producing high-quality welded pipe assemblies in a fast-paced fabrication environment. This role operates welding and fabrication equipment to weld outlets to pipe, perform rewelds as required, and ensure finished products meet company and...
- ...Corporation USA is seeking a safety‑focused Pipefitter to support installation, modification, testing, and commissioning of process piping within a semiconductor manufacturing environment. The ideal candidate will install and align piping for chemicals, gases, water,...For subcontractor
- ...PipefitterResponsible for daily Pre-Task Planning of all work performed in the field. Use saws, cutting torches, and pipe benders to cut and hammer pipes to specification. Study blueprint and construction plans for pipe systems, supports, and related equipment. Responsible...
- ...compliance with industry codes and standards. The Pipefitter will play a crucial role in the installation, maintenance, and repair of piping systems, contributing to the overall efficiency and safety of our operations. Responsibilities: Plans, prepares, installs,...Full timeShift workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Landscape Pipe Fitter. Be the first to apply!
- pipe fitter Phoenix, AZ
- pipefitter apprentice Phoenix, AZ
- pipefitter Phoenix, AZ
- landscape construction project manager Phoenix, AZ
- landscaping jobs Phoenix, AZ
- landscape construction Phoenix, AZ
- landscape account manager Phoenix, AZ
- horticulture landscaping Phoenix, AZ
- landscape architecture intern Phoenix, AZ
- sponsorship landscaping Phoenix, AZ



