Power Distribution Center (PDC) Assembly Technician
Fusion Industrial Group LLC
Job Description
Job Description
The PDC Assembly Technician assembles the modular enclosure, then builds out, wires, and tests power distribution centers (PDCs), also called e-houses or packaged control houses. Working alongside fellow technicians, engineers, and project managers, you help deliver a finished building that leaves our facility fully tested and ready to energize.
Essential Duties and Responsibilities
Enclosure assembly
• Verify the skid structure is level, square, and to drawing before assembly begins.
• Mount and fasten floor panels to the skid structure; seal floor seams and penetrations.
• Set, align, and fasten wall panels to the floor and to each other, keeping the enclosure plumb and square. • Hang and adjust doors
• Install insulation in wall, ceiling, and floor cavities to specification.
• Install ceiling and roof panels, flashing, and sealant so the enclosure is weathertight.
• Cut and frame openings for HVAC, cable entries, and other penetrations per drawings. All panel and component lifts use proper rigging, tag lines, and crane signals.
Equipment installation
• Read and work from electrical drawings, one-lines, schematics, wire lists, layouts, and bills of material.
• Set, align, and anchor equipment such as switchgear, MCCs, transformers, VFDs, panelboards, UPS, batteries, and control panels.
• Lay out, cut, and install cable tray, strut, conduit (EMT, rigid, and PVC), and supports.
• Install lighting, receptacles, fire and gas detection, HVAC controls, and other building systems.
Wiring and termination
• Pull, route, and dress power and control cable; terminate using lugs, crimps, and compression tools to specified torque.
• Wire control panels and marshalling cabinets point-to-point, including PLC, I/O, relay, and network cabling.
• Label wires, devices, and equipment to drawing and customer standards.
• Install grounding and bonding systems per drawings and the NEC. Test and quality
• Perform continuity, point-to-point, insulation resistance (megger), and torque checks, and record results. • Support functional and factory acceptance testing (FAT) with engineering and customers.
• Mark up drawings with as-built changes and report discrepancies to engineering promptly.
• Complete digital travelers, checklists, and time entries accurately so customers have real-time visibility into their build.
Safety and teamwork
• Follow all shop safety practices; stop work when something is unsafe.
• Keep the work area clean and organized; maintain tools and test equipment.
• Train and support less-experienced technicians, and suggest improvements to standard work.
• Travel occasionally to customer sites for installation support, punch list, or startup
Qualifications Required
• High school diploma or GED.
• 2+ years of hands-on experience in industrial electrical work, control panel building, or electrical assembly
• Ability to read and work from electrical schematics, wiring diagrams, and mechanical and structural assembly drawings.
• Working knowledge of 120/208/240/480 V AC and 24 V DC control circuits.
• Skilled use of hand and power tools, knockout punches, conduit benders, crimpers, and a multimeter.
• Ability to read a tape measure and level accurately and work to tolerance; mechanical aptitude for bolting, shimming, and squaring structural assemblies.
• Valid driver’s license; ability to pass a pre-employment drug screen and background check.
Physical Demands and Work Environment
Work is performed in an industrial fabrication shop, inside and around enclosures under construction. Interior spaces in a building under construction may not be climate controlled.
• Stand, walk, kneel, crouch, and climb ladders for extended periods.
• Lift and carry up to 50 lb unaided; position floor, wall, and ceiling panels and other heavy items with forklifts, cranes, or a team lift.
• Work at heights (including on top of the enclosure during ceiling and roof installation), in confined spaces, and in elevated temperatures.
• Wear required PPE, including safety glasses, hearing protection, gloves, safety-toe boots, and fall protection; use respiratory protection when handling insulation as required.
• Distinguish wire colors accurately.
- ...fleet, aviation and marine, and emergency power generation companies across the U.S. With 40+ offices and distribution centers and more than 1,400 field service professionals... .... Job Title: Field Operations Technician II Job Description: Performs several duties...SuggestedDaily paidTemporary workFor subcontractorNight shift
$21.44 per hour
...Job Description Assembly Technician - 1st Shift HireCall Staffing | Tulsa, OK Pay: $21.44/hour plus depending on experience Schedule... ...components Safely and effectively use hand tools and power tools Read and interpret blueprints, assembly drawings, and...SuggestedWork at officeMonday to FridayDay shift- ...Field Technician (Mechanic) (Pump, Power & HVAC) EquipmentShare is hiring a Field Technician (Mechanic) (Pump, Power & HVAC) at our Advanced Solutions... ...of power generators, diesel engines, electrical distribution equipment, HVAC equipment and/or oil free air compressors...Suggested16 hoursFull timeMonday to FridayNight shift
- Summary As an ESP Assembly Technician, you will play a crucial role in assembling and testing electric submersible pumps (ESP) within a dynamic... ..., following defined work instructions and using hand and power tools. Perform regular test and inspection procedures to ensure...Suggested
- ...Description Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair... ...within the refining, petrochemical, chemical, power, or upstream markets working on or maintaining...SuggestedWorldwide
- ...structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an...Full timeCurrently hiring
- .... What You Will Contribute: The Assembler II is responsible for assembling parts according... ...Hand, battery, electric and pneumatic powered tools to complete assemblies. Use... ...: Understand gluing and centering to specific tolerances which includes multiple...Temporary workWork at officeLocal areaFlexible hoursDay shift
$20 per hour
...OKSchedule: Full-TimePay: DOEType: Manufacturing / AssemblyThe Assembler is responsible for transforming materials through manufacturing... ...specificationsKnowledge of overhead crane operationExperience using power tools and hand toolsFamiliarity with industrial manufacturing...Afternoon shift$125 per hour
...oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family...Bi-weekly payFull time- ...Job DescriptionJob Description Assembly Technician — Entry LevelAdvanced PMC | Owasso, OKAdvanced PMC is seeking an entry-level Assembly Technician... ...and assembling precision components using hand tools, power tools, and presses.We are looking for someone mechanically inclined...
- ...the team, you will:Positions parts and subassemblies by reading blueprints and instructions.Assembles components by examining connections for correct fit.Operates hand and power tools to connect parts.Performs tube installation and rolling operations.Keeps equipment operational...Shift work
$22 - $25 per hour
...Job Description Assembly Technician Pay: $22-$25 per hour (based on experience) Location: Sand Springs, OK Hours: Monday-Thursday | 6:00 AM-4:30 PM Job Type: Temp-to-Hire Job Order #: 123181 Position Overview We are seeking two...Hourly payFull timeTemporary work$25 per hour
...Aviation Assembler Tulsa, OK | $25.00/Hour | Full-Time | 1st Shift Join a growing... ...aircraft components using hand tools, power tools, and pneumatic tools Read and interpret... ...for assemblers, mechanics, maintenance technicians, automotive technicians, and...Weekly payPermanent employmentFull timePart timeFlexible hoursDay shift- ...Assembler I Location: Tulsa, OK, United States, 74115 Company: Chart Industries Ensuring Chart's Success... At Chart, we design... ...Delivering Nexus of Clean solutions for clean water, clean power, clean food, and clean industrials Powering the carbonation...Full timeLocal areaAfternoon shift
$25 per hour
...Aviation Assembler Tulsa, OK | $25.00/Hour | Full-Time | 1st Shift Join a growing... ...repair aircraft components using hand tools, power tools, and pneumatic tools Read and... ...for assemblers, mechanics, maintenance technicians, automotive technicians, and...Weekly payPermanent employmentFull timeTemporary workPart timeFlexible hoursDay shift$800 per month
...Job Title: Assembler TO APPLY: # APPLY DIRECTLY TO THIS POSTING TO PIN IT TO YOUR PROFILE. # SET UP A MEETING TO DISCUSS THE DETAILS... ...and bills of materials. You will use a variety of hand, power, and pneumatic tools to build high-quality products that meet customer...Weekly payContract workTemporary workMonday to FridayDay shift- ...3250 N Sheridan Rd, Tulsa OK 74115 Are you an experienced Assembler looking for a stable, rewarding opportunity with a company that... ...RESPONSIBILITIES Hand assembly of cooler components Uses hand and power tools to assemble components and the final completed cooler...Flexible hours
$18.86 - $22 per hour
...Assembler Industrial Assembler Location: West Tulsa, OK Pay Range: $18.86–$22.00 per hour Schedule: Monday–Friday, 5:00 AM to 1:30 PM... ...required parts and materials for assembly. Use hand tools, power tools, measuring devices, and testing equipment safely and effectively...Hourly payMonday to Friday- ...structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an...Full timeCurrently hiring
- ...DescriptionBuild industrial fabricated components from blueprints on 1st shift in Tulsa. Industrial assembly experience is preferred. Quick facts:1st shiftLocation: Tulsa, OKHand and power tools, overhead cranes What you'll do:Assemble metal fabrication components from...Day shift
- ...drawings, wiring diagrams and electrical schematics to prepare and assemble electronic/mechanical assemblies, Performs numbering,... ...drawings, blueprints and specifications, Operating knowledge of overhead cranes, Operating knowledge of power and hand tools....
- ...is at the very core of our company DNA. Job Title: Electrical Assembler GENERAL PURPOSE OF JOB The employee is responsible for the assembly... ...assemblies. Uses hand tools, jigs, fixtures, and miscellaneous power tools and equipment. Gains or has attained full proficiency in...Local areaFlexible hours
$19 - $23 per hour
...Electrical Panel AssemblerIndustrial Electrical Panel Assembler Location: West Tulsa, OK Pay: $19.00–$23.00/hour, depending on experience... ...breakers, contactors, and related componentsUnderstand proper power cable sizing and general wiring practices in accordance with NEC...Full time$18 per day
...Job Description Job Description Experienced Assembler – Day Shift Pay: $18+/hour, depending on experience We are seeking an experienced... ...equipment using blueprints, work instructions, hand tools, and power tools. Qualifications: Previous mechanical or production...Day shift- ...DescriptionJob DescriptionGreat Company looking for an Electrical Assembler.The Electrical Assembler will be building panel units that are... ...etc. Must be able to bend conduit, thread pipe, and wire AC/DC power terminations. This is a requirement with no exceptions. M-F, 6:...Weekly payImmediate start
$18 - $24 per hour
...Assembly Technician Fluid-Handling Systems The Assembly Technician builds, tests, and prepares fluidhandling components and systems used in... ...report any issues or nonconformities. Operate hand tools, power tools, crimpers, and measurement devices safely and efficiently...Contract workTemporary workMonday to Friday$18 - $24 per hour
....00 per hourJob description:1st shift $17/hourBasic Mechanical Assembly experience, will be working on a projectResponsibilities:· Prepares... ...experience· Safety Management· Quality Focus· Experience using power tools· Good Judgment and Decision-Making skills\nCompany...Local areaDay shift$17.5 - $18 per hour
...Mechanical Assembler OpportunityA Jenks manufacturing company is currently seeking mechanical assemblers! The environment is clean, climate... .../heavy work experience.Experience working with hand and power tools.Aptitude for basic computer work.If interested, please apply...Permanent employmentWork experience placementMonday to Friday- ...with a passion for following assembly procedures, problem-solving,... ...Small Mechanical Assembly Technicians. If you enjoy working on craftsman... ..., equipment, machinery or power tools. Repairing,... ...utilities, power generation or distribution. The extraction, compression...Shift work
- ...Assembler Structural II Pryer Aerospace Tulsa - Tulsa, OK 74115 Overview Category Manufacturing Description As a Structural... ...and hardware using industry standard hand tools and power tools. Lay out and/or locate components, prepare fastener holes...Local areaShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Power Distribution Center (PDC) Assembly Technician. Be the first to apply!


