Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Punch Press Operator

$22.7 - $28.59 per hour

ABB

At ABB , we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This position reports to: Manufacturing Manager - NEMA __ Auto Punch Press Operator Essential Functions- Auto Press Operator Lamination: Auto Press Operators must be able to perform these functions in a manner that does not compromise their safety or the safety of coworkers. The auto press operator must be able to perform these tasks for a minimum of 8 hours per day, 5 days a week. If an employee is unable to perform these essential functions it is their responsibility to bring this to the attention of their supervisor, manager, or Human Resource Manager. In these situations, ABB will discuss and attempt to provide any reasonable accommodation that may be available. Operators will be trained in all steps of the job. Stretching exercises will be done at the beginning of every shift. Supervisor will go over Job Safety Analysis sheets, safety checklist, personal protective equipment (PPE) and instructions on performing daily clean up. Requirements: ACCOUNTABILITIES: Operate punch press equipment safely by verifying all safety mechanisms, press release forms, and emergency stops are functioning before each job run Inspect incoming materials and finished parts for quality defects, verify specifications match blueprints and work orders, and check flatness per coil requirements Manage material processing workflow including feeding materials through straighteners and feeders, monitoring lubrication systems, maintaining loop conveyor operations, and properly shutting down equipment at end of run Maintain safety compliance by wearing required PPE, identifying non-conforming material, completing required documentation, and immediately reporting injuries, accidents, and near misses QUALIFICATIONS: Ability to lift and carry up to 50 pounds regularly and possess hand-eye coordination and dexterity to operate hand tools, power tools, and complex equipment including pallet jacks, chain hoists, pneumatic tools, and press controls Commitment to safety with understanding of ABB safety policies, hazard communication, and ability to properly use PPE including safety glasses, hearing protection, safety shoes, and cut-resistant gloves Capacity to read, comprehend, and follow written and verbal instructions including blueprints, work orders, inventory tags, and ability to use basic mathematics Physical stamina to stand and walk for extended periods while maintaining production pace and ability to work scheduled overtime including weekends and short-notice calls Reliable attendance with ability to arrive on time and complete full scheduled work days consistently Willingness to complete on-the-job training on all operational steps and equipment use as required by the position Experience- 0-2 years of industry related experience ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we’ll give you what you need to make it happen. It won’t always be easy, growing takes grit. But at ABB, you’ll never run alone. Run what runs the world. This Position reports to: Patrick Sexton (3rd shift) The work model for the role is: Onsite While hourly pay rate is determined by things such as the successful applicant’s qualifications and experience, this position is expected to pay between $22.70 and $28.59 hourly. (Shift premium for 2nd & 3rd shift) More about us: ABB’s NEMA Motors Division is the global leading electric NEMA motors manufacturer. With more than 4,500 employees across the globe and seven manufacturing locations that produce more than 1.6 million motors every year, the division powers its customers from many industries with safe, reliable energy-efficient and effective solutions. NEMA Motors Division is a trusted leader with the shortest lead time and the broadest modularized product offering. What's In It For You We want you to bring your full self to work—your ideas, your energy, your ambition. You’ll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Aff…? All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ABB Benefit Summary For Eligible US Employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on "Candidate/Guest" to learn more Health, Life & Disability Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. Choice between two dental plan options: Core and Core Plus Vision benefit Company paid life insurance (2X base pay) Company paid AD&D (1X base pay) Voluntary life and AD&D – 100% employee paid up to maximums Short Term Disability – up to 26 weeks – Company paid Long Term Disability – 60% of pay – Company paid. Ability to "buy-up" to 66 2/3% of pay. Supplemental benefits – 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance Parental Leave – up to 6 weeks Employee Assistance Program Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption Employee discount program Retirement 401k Savings Plan with Company Contributions Employee Stock Acquisition Plan (ESAP) Time off ABB provides 11 paid holidays. Vacation is provided based on years of service for hourly and non-exempt positions. Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences. #J-18808-Ljbffr

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Punch Press Operator in Saint Louis, MO vacancy
  • $30.05 per hour

     ...Job Description Job Description Job Title: Press Brake Operator Job Description We are seeking a skilled Press Brake Operator to set up and operate sheet steel laser cutters and press brakes. The role involves writing and interpreting CNC programs as needed,... 
    Suggested
    Weekly pay
    Permanent employment
    Contract work
    Temporary work
    Work at office
    Night shift
    Afternoon shift

    Aerotek

    Saint Louis, MO
    3 days ago
  • $30.05 per hour

     ...Press Brake Operator We are seeking a skilled Press Brake Operator to set up and operate sheet steel laser cutters and press brakes. The role involves writing and interpreting CNC programs as needed, setting up and changing over equipment tooling and dies, and inspecting... 
    Suggested
    Permanent employment
    Contract work
    Temporary work
    Night shift
    Afternoon shift

    Aerotek

    Saint Louis, MO
    5 days ago
  • $22.7 - $28.59 per hour

     ...create together. Join us and help run what runs the world. This position reports to: Production Supervisor __ Auto Punch Press Operator- Grade 18 (2nd Shift) Essential Functions- Auto Press Operator Lamination Auto Press Operators must be able to perform... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    Immediate start
    Monday to Friday
    Shift work
    Night shift
    Weekend work
    Afternoon shift

    ABB

    Saint Louis, MO
    7 days ago
  • $28.59 per hour

     ...fixtures accurately and safely. 6. Maintains/services CNC machines (coolant upkeep, cleaning of machines, filter changes, etc.). 7. Operates the CNC machining centers in a safe a manner while keeping distractions to a minimum. 8. Performs basic troubleshooting of CNC... 
    Suggested
    Hourly pay
    Night shift
    Afternoon shift

    Established Manufacturing Employer

    Saint Louis, MO
    23 days ago
  •  ...Job Description Job Description CNC Operator – Multiple Locations & Shifts Available We are currently hiring experienced CNC Operators for multiple manufacturing facilities throughout the area. We have multiple openings, locations, and shifts available , making... 
    Suggested
    Full time
    Currently hiring
    Shift work

    Established Manufacturing Employer

    Saint Louis, MO
    23 days ago
  •  ...The Gund Company in St. Louis, MO is seeking a CNC Operator II for the 2nd shift to set up and operate CNC machines, read blueprints, and ensure high-quality parts. You will work with lathes, mills, and machining centers, performing tool changes, measuring parts, and... 
    Afternoon shift

    The Gund Company

    Saint Louis, MO
    4 days ago
  •  ...Overview Responsible for making CNC programs for machines to produce parts. Write, adjust, and troubleshoot CNC programs. Job Duties Operates assigned CNC (Computer numerical control machinery) that utilizes preprogrammed computer software dictates the movement of factory... 
    Contract work
    Shift work
    Day shift

    Sterling Engineering

    Saint Louis, MO
    1 day ago
  •  ...Machinists! This is your opportunity to join a fast-growing organization that has been in the aerospace industry for over 50 years. Operating out of a climate-controlled facility conveniently located near the I-44/I-270 exchange, the plant runs seven days a week to... 
    All shifts
    Afternoon shift

    Randstad

    Saint Louis, MO
    4 days ago
  • $27.18 - $34 per hour

    Position Summary As a CNC Machinist III-2nd Shift you will be responsible for setup and operate Computer Numerically Controlled (CNC) lathes and/or mills. Primarily responsible for setting up and operating equipment with some program editing and offsetting on a variety... 
    Temporary work
    For contractors
    Work at office
    Local area
    Shift work
    Afternoon shift

    US Endoscopy

    Saint Louis, MO
    1 day ago
  • Program Development: Create and optimize efficient CNC programs for multi-axis CNC mills and lathes utilizing CAM software. (NX & Mastercam) Blueprint & Model Analysis: Interpret complex aerospace blueprints, geometric dimensioning and tolerancing (GD&T), and 3D CAD...

    MCCAY TOOL & ENGINEERING COMPANY

    Saint Louis, MO
    4 days ago
  • $35 - $48 per hour

     ...programming. Proficiency with Siemens NX CAD/CAM software for CNC programming. Strong understanding of G-code and CNC machine operations. Knowledge of cutting tools, toolpaths, feeds, speeds, and material behavior in machining. Experience working with high-... 
    Contract work
    Temporary work
    Monday to Friday

    Actalent

    Saint Louis, MO
    1 day ago
  • $22 per hour

    CNC Operator I - 2nd Shift The Gund Company - St. Louis, MO Schedule: 2:00 PM-10:30 PM Monday-Friday | Full-Time Pay: $22+ based on experience + 15% Shift Differential Build Something That Matters—Every Day At The Gund Company, our CNC Operators don’t just run machines... 
    Full time
    Monday to Friday
    Shift work
    Afternoon shift

    Gund Co.

    Saint Louis, MO
    4 days ago
  •  ...growing and looking to add to our team. Responsibilities: Set up and operate CNC lathe and/or machine center-programming a plus Create /...  ...secondary machines, tools such as sanders, grinders, drill presses / mills, lathes Calculate dimensions and tolerances Interpret technical... 

    Webtrol

    Saint Louis, MO
    4 days ago
  • $22 per hour

    Job Summary: Looking to grow your career in precision manufacturing? We are looking for a CNC Machine Operator to join a growing team. Responsibilities include: Machine steel parts and rail according to specifications Read and interpret blueprints Use digital calipers... 
    Full time
    Monday to Friday
    Flexible hours
    Shift work

    Express Employment Professionals - Cincinnati East

    Alorton, IL
    5 days ago
  •  ...Job Description Job Description Description: CNC Operator II - 2nd Shift The Gund Company | St. Louis, MO Schedule: Monday-Friday, 2:00 PM-10:30 PM (Full-Time) Pay: Competitive pay based on experience, plus a 15% shift differential Build Something... 
    Full time
    Monday to Friday
    Shift work
    Afternoon shift

    The Gund Company

    Saint Louis, MO
    14 days ago
  • $30.59 per hour

     ...saws and surface grinders. Machine precision components accurately while adhering to safety and quality standards, including safe operation of forklifts and lifting equipment. Education Requirements Associate degree in Machining or a related field preferred; OR... 
    Night shift
    Afternoon shift

    HiFyve

    Saint Louis, MO
    8 days ago
  •  ...that has earned multiple supplier performance awards. Kemco is seeking highly skilled team members to support the manufacturing operations. Our facility is open 7 days a week and utilizes 4 shifts to maximize production across the full week. Shift premiums are... 
    Hourly pay
    Permanent employment
    Full time
    Monday to Friday
    Shift work
    Night shift
    Weekend work
    Afternoon shift

    Kemco Aerospace Engineering

    Saint Louis, MO
    11 days ago
  • $20 - $35 per hour

     ...Pay: $20.00–$35.00/hour, based on experience Schedule: Full-Time We are hiring CNC Machinists for a growing machining operation in Crestwood, MO. We are open to a wide range of experience levels and machining backgrounds. Whether your experience is primarily... 
    Full time

    Express Saint Louis

    Saint Louis, MO
    2 days ago
  •  ...efficiency standards. Second of Four levels of CNC machining center operators. Beginning to set up, adjust and identify programming, and...  ...Operator II, Operator II Sample Equipment: (CNC milling, turning and//or axis centers, routers, punch presses, shears, saws etc)... 
    Day shift

    The Gund Company

    Saint Louis, MO
    7 days ago
  • $29 - $38 per hour

     ...tasks. \n Responsible for the review and release of special orders from GCOD hold, assist with the preparation of samples and CNC operations for pilot runs for new product launches and assist launch teams during those pilots. Actively participate on improvement teams... 
    Hourly pay

    Marvin

    Saint Louis, MO
    15 days ago
  •  ...Press Operator Position Overview The press operator is responsible for operating all of the equipment in the area. Candidates are considered top of their field by being able to successfully troubleshoot all equipment tied to cell and use their expertise to solve problems... 
    Temporary work

    Thunderbird

    Saint Louis, MO
    1 day ago
  • $25 per hour

    Are you a Lithographic, Flexographic or Digital Printing Press Operator? Open To Relocation? We also have 29 other Facilities Including: Fullerton CA. Fort Worth TX. Waukesha WI. Batavia OH. Lafayette Hill PA.  Build your Career with an Industry Leader. As the global... 
    Full time
    Local area
    Relocation
    Relocation package
    Shift work

    MCC

    Saint Louis, MO
    1 day ago
  • $25 per hour

     ...Printing Press Operator Opportunity Are you a Lithographic, Flexographic or Digital Printing Press Operator? Open to relocation? Build your career with an industry leader. As the global leader of premium labels, MCC helps brands stand out in competitive markets and... 
    Full time
    Relocation
    Relocation package
    Shift work

    Multi-Color Corporation

    Saint Louis, MO
    4 days ago
  • $30 per hour

    Job Description Job Description CNC Machinist on Mazak Lathes - Fenton, MO Position Title: CNC Machinist - Mazak Lathes Education: Formal Machinist training with certificate and/or previous experience. Experience: 1-3 years previous experience with manual ...
    Hourly pay
    Full time
    Local area
    Remote work
    Relocation
    Monday to Friday
    Shift work
    Day shift

    Adecco

    Fenton, MO
    23 days ago
  • $24 - $30 per hour

     ...enjoy working with a staff of twenty or more team members. Daily duties in the life of the CNC Machinist can include: Set-up and operate a variety of CNC machine tools, including Okuma, Makino, and Mighty Viper milling machines. Set-up, program, and operate... 
    Hourly pay
    Full time
    Temporary work
    Work at office
    Relocation
    Monday to Friday
    Flexible hours
    Shift work
    Day shift

    TOOL SPECIALTIES CO CORP

    Hazelwood, MO
    9 days ago
  •  ...Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible... 
    Local area

    Home Depot

    Saint Louis, MO
    1 day ago
  •  ...Job Description Job Description The CNC Lathe Set Up / Operator will set up and operate CNC Lathes to perform various machine functions such as cutting, drilling, milling, reaming and boring of workpieces utilizing live tooling. Ehrhardt Tool & Machine is a precision... 
    Full time
    Relocation
    Flexible hours
    Afternoon shift

    MultiSource Mfg

    Granite City, IL
    9 days ago
  •  ...impressive array of manufacturing resources.  The heart of our operation is the extra attention and service we give our customers. Our...  ...Papers and Vinyl to Full Sheets, Profile Wrappings, Membrane Pressing, Boring & Routing, Miter-Folding, Straight-Line & Contour Edge... 
    Temporary work
    Worldwide
    Monday to Thursday
    Shift work

    JMC Wood Manufacturing

    Bridgeton, MO
    17 days ago
  • $40 per hour

     ...on Hydromat machining experience - required! ~3+ years of machining, setup, or related CNC experience ~ Experience setting up, operating, adjusting, and troubleshooting machining equipment ~ Strong blueprint reading skills ~ Working knowledge of G-Code and M-Code... 
    Hourly pay
    Full time
    Temporary work
    Work experience placement
    Local area
    Remote work
    Relocation
    Shift work
    Weekend work
    3 days per week

    Adecco

    Fenton, MO
    23 days ago
  • $25 - $28 per hour

     ...Description Job Description Build a Career Where Your Work Shows Up on Store Shelves! Position Summary Propelis is hiring a Press Operator 2 for our St. Louis location. In this hands-on production role, you will operate and maintain a two-piece, dry offset printing... 
    Hourly pay
    Temporary work
    Local area
    Relocation package
    Flexible hours
    Shift work
    Day shift

    Schawk USA LLC

    Saint Louis, MO
    8 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Punch Press Operator. Be the first to apply!