Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Assembler Mfg Direct - Truss

Builders FirstSource

AssemblerThe Assembler is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties.Essential Duties And ResponsibilitiesPlaces parts in specified relationship to each other.Bolts, clips, screws, cements, or otherwise fastens parts together.Cuts products to specific measurements as needed.Removes defective products as needed.Tends machines to perform force fitting or fastening operations on assembly line.Works at different workstations as production needs require.Works in environment where tasks change as varying models of product are produced.Cleans equipment, floors, and work areas according to safety procedures.Other duties may be assigned.Supervisory ResponsibilitiesThis job has no supervisory responsibilities.Minimum RequirementsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.There are no requirements in terms of education or experience.Prior carpentry experience helpful.CompetenciesAbility to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations.Ability to add, subtract, multiply, and divide. Ability to read tape measure.Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Work Environment / Physical ActivityThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is required to regularly and frequently stand for a long period of time; use hands to finger, handle, or feel; reach with hands and arms and talk or hear.The employee is regularly and frequently required to walk.The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.The employee must regularly and frequently lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles.The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration.The noise level in the work environment is usually loud.Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.Builders FirstSource is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender, gender identity or expression, national origin, pregnancy, genetic information, uniformed service, protected veteran status or status as an individual with a disability, or any other protected class in accordance with all applicable local, state or federal laws and regulations.In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Builders FirstSource, please call View phone number on click.appcast.io or email: View email address on click.appcast.io. Please do not send resumes to this email address - it is intended only to be used to request an accommodation in submitting an application for a job opening.

Vacancy posted 12 hours ago
Similar jobs that could be interesting for youBased on the Assembler Mfg Direct - Truss in Orlando, FL vacancy
  • $26 - $32 per hour

     ...Electromechanical AssemblerIf you have experience with electromechanical assembly and enjoy building complex systems from blueprints and...  ...and simulation technologies is beneficial.Experience working directly with engineers in a highly technical, prototype-oriented environment... 
    Suggested
    Contract work
    Temporary work
    Shift work

    Aerotek

    Orlando, FL
    12 hours ago
  • The Mechanical Assembly Technician is responsible for the repair of all specified assemblies and/or sub-assemblies within their group...  ...eye for detail. Ability to work independently or easily follow directives from supervisor. Mandatory OT or Piecemeal when circumstances... 
    Suggested

    Hytec Dealer Services, Inc.

    Orlando, FL
    19 hours ago
  •  ...Assembler IAssemble a variety of different electrical components. Duties and responsibilities include assembling harnesses, cables, switch...  ..., jig saw, etc. Understand and carry out verbal and written directions in English. Close attention to detail. Function with a minimal... 
    Suggested

    REV Group Inc

    Winter Park, FL
    2 days ago
  •  ...Fiber Assembler TechnicianJoin world-class experts in finding answers to our customers toughest questions as a Fiber Assembler Technician...  ...prior to turning work inAbility to work independently without direct supervisionUse of a microscope to inspect fiber and connectors... 
    Suggested
    Worldwide

    Halma plc

    Orlando, FL
    19 hours ago
  •  ...specifications. Job Duties and Responsibilities: Production Assembler I Able to read and follows procedures exactly as written....  ...to executive recruiting through our core brands: HireQuest Direct, MRINetwork, Snelling, and TradeCorp. Recognized by SIA as one... 
    Suggested
    Temporary work

    Snelling

    Orlando, FL
    4 days ago
  •  ...cap on your earnings. You're the go-to person when it comes to assembling bikes, grills, furniture, or any other product. You love...  ...Work independently, set your pace, and enjoy the freedom of self-direction.Training & certification: Start strong with our comprehensive... 
    Weekly pay
    Minimum wage
    Full time
    Part time
    Local area
    Immediate start
    Flexible hours
    Weekend work

    National Assemblers

    Orlando, FL
    1 day ago
  • Job Description Job Description 3rd SHIFT Welder II Role Overview Operate independently performing advanced welding, blending, stress relief, and metal fabrication processes using TIG and MIG techniques in a fast-paced manufacturing environment. Key Responsibilities...
    Night shift

    Apidel Technologies

    Orlando, FL
    24 days ago
  • $25 - $26 per hour

     ...procedures. Fabricate and finish scenic components, props, and themed elements according to design drawings, blueprints, and artistic direction. Sculpt and shape foam, clay, and epoxy-based materials into three-dimensional forms that align with design intent.... 
    Hourly pay
    Weekly pay
    Currently hiring
    Monday to Friday
    Shift work
    Weekend work

    Skillforce (USA)

    Orlando, FL
    3 days ago
  • $26 - $32 per hour

     ...Electromechanical AssemblerIf you have experience with electromechanical assembly and enjoy building complex systems from blueprints and...  ...and simulation technologies is beneficial.Experience working directly with engineers in a highly technical, prototype-oriented environment... 
    Contract work
    Temporary work
    Shift work

    Aerotek

    Orlando, FL
    12 hours ago
  •  ...according to company and industry standards. Accurately complete daily reports and paperwork. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any... 
    Hourly pay
    Temporary work
    Local area
    Immediate start
    Remote work
    Work from home
    Relocation
    Night shift

    FHG Solutions INC

    Winter Park, FL
    4 days ago
  •  ...Mechanical AssemblerWe are seeking a 12?month contract assembler to build large mechanical sub?assemblies and complex linkages on a 4?day/10?hour schedule, working on their feet. The role requires reading technical drawings and blueprints, installing hardware stack?ups... 
    Full time
    Contract work
    For contractors

    PLANIT Group

    Orlando, FL
    19 hours ago
  •  ...AssemblerOur client, an Aerospace and Defense company, is looking for an assembler for their Orlando, FL location.Responsibilities:Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies... 
    Local area

    ICONMA

    Orlando, FL
    19 hours ago
  •  ...Sub Assembly/Racks AssemblerWe are seeking a Sub Assembly/Racks Assembler to build and wire assemblies such as power distribution load boxes, control/communication panels, joysticks, and related mechanical assemblies. The role requires reading blueprints, schematics,... 
    Permanent employment
    For contractors

    Donatech

    Orlando, FL
    2 days ago
  • $18 - $19 per hour

     ...AssemblerThe Assembler plays a key role in building specialized equipment used in aviation and military applications. In this role, you assemble plane de-icers, aircraft tow vehicles, cargo loading systems, airport gate equipment, and related mechanical and electrical... 
    Permanent employment
    Contract work
    Temporary work

    Aerotek

    Orlando, FL
    13 hours ago
  •  ...Manufacturing AssemblerThe Manufacturing Assembler in the Buy & Mark area is responsible for accurately labeling commercial off the shelf (COTS) cables and assets according to established label charts. This role ensures that all components are correctly identified, tracked... 

    Pacer Group

    Orlando, FL
    19 hours ago
  •  ...most trusted brands in the air transportation industry, including LEKTRO®, JetAire®, JetPower®, AmpTekÔ, Jetway®, and more. An Assembler Technician assembles mechanical, hydraulic and electrical components to produce industrial assemblies conforming to product and customer... 
    Permanent employment
    Work at office

    Oshkosh Corporation

    Orlando, FL
    4 days ago
  •  ...SpecialtyRx takes pride in delivering personalized care and quality pharmacy services.   Responsibilities Able to work under the direction of a supervisor Process prescriptions using OnDemand Express III machine Operate, troubleshoot and maintain OnDemand Express... 
    Local area

    SpecialtyRX

    Orlando, FL
    27 days ago
  •  ...candidate will be responsible for operating wire cutting machinery and label printing equipment and label cables for electrical assemblies. This position requires attention to detail, basic mechanical aptitude, and the ability to work in a fast-paced production environment... 
    Day shift

    PLANIT Group

    Orlando, FL
    19 hours ago
  •  ...Mechanical Assembler- Orlando, Fl. 32825Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works... 

    PLANIT Group

    Orlando, FL
    19 hours ago
  •  ...Technician must demonstrate their adaptability by being able to install multiple types of devices. Reading prints and following the directions and assignments given to them by the Site Superintendent/PM. The Low Voltage Cable Technician will require good communication... 
    Permanent employment
    Full time
    Contract work
    For contractors
    Casual work
    Work at office
    Overseas
    Shift work
    Night shift
    Weekend work

    Mission Critical Solutions

    Orlando, FL
    3 days ago
  •  ...Electro-Mechanical Assembly Technician (Harness Experience Preferred) Testing, documentation, troubleshooting, and inspection of Electro/Mechanical assemblies. Assemble Chassis Components, Electro-optic, and Electronic Assemblies from various forms of documentation... 
    Work at office

    C4 Advanced Tactical Systems

    Orlando, FL
    19 hours ago
  • $19 - $27 per hour

     ...sketches Layout and cross check shop set ups Fabricate and assemble metal structures using welders, cutters, shapers and measuring...  ...for any fees related to unsolicited resumes or candidates sent directly to hiring managers or staff. #RandallHiringNow... 
    Hourly pay
    For subcontractor
    Shift work
    Night shift
    Day shift

    Randall Construction

    Orlando, FL
    7 days ago
  • $23 - $30 per hour

     ...FL! Earn $23-$30/hr, enjoy weekly pay, benefits, and steady work with a national leader. Apply now!Responsibilities:Supervise and direct onsite teams of 3–5 low voltage technicians, ensuring high-quality workmanship and safety standardsManage daily project tasks to meet... 
    Weekly pay
    Immediate start

    QPS

    Orlando, FL
    2 days ago
  • $18 per hour

     ...Job Description Job Description Assembler Pay Rate: $18/hr Shift: Monday - Friday (5am-3:30pm) Benefit: OT Available Responsibilities: Assemble plane de-icers, aircraft tow vehicles, cargo loading systems, airport gate equipment, and military equipment... 
    Weekly pay
    Permanent employment
    Contract work
    Temporary work
    Work at office
    Monday to Friday
    Shift work

    Aerotek

    Orlando, FL
    2 days ago
  • $23 - $30 per hour

     ...Cabling Orlando FL Earn $23-$30/hr, enjoy weekly pay, benefits, and steady work with a national leader. Responsibilities: Supervise and direct onsite teams of 3–5 low voltage technicians, ensuring high-quality workmanship and safety standards Manage daily project tasks to... 
    Weekly pay
    Relocation package

    Monroechamber

    Orlando, FL
    2 days ago
  • $20 - $30 per hour

     ...Looking for Full-Time, Part-Time, and Weekend-Only Availability. Will Work with Your Schedule!National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers in 2023. We are the trusted... 
    Full time
    Part time
    For subcontractor
    Local area
    Work from home
    Weekend work

    National Assemblers

    Orlando, FL
    1 day ago
  •  ...individuals who are eager to learn and thrive on new challenges.Position OverviewWe are currently seeking a Panel Builder to join our assembly shop team in Sanford, Florida. This is not a remote work position. This role is ideal for candidates with some experience in... 

    PuroGen Laboratories LLC

    Sanford, FL
    19 hours ago
  •  ...products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for... 
    Work at office
    Local area
    Immediate start
    Day shift

    Commercial Metals

    Orlando, FL
    19 hours ago
  • $25 - $30 per hour

     ...Electrical Assembly Technician (Temp-to-Hire) Location:  Orlando, FL (Boggee Creek Road Area) Pay: $25-$30/ hour Job is locally based but some travel may be required. Shift: M-F 7am-4pm (40-50 Hours per week) Seeking an electrical technician to provide functional... 
    Temporary work
    Work at office
    Shift work

    EnerStaff

    Orlando, FL
    2 days ago
  • Job Description Job Description Now Hiring: Experienced Prop Fabricator & Finisher We are seeking a highly skilled Prop Fabricator & Finisher to join our creative team. This position is ideal for a hands-on artist who excels at building, detailing, and finishing...
    Immediate start
    Flexible hours

    Ripley Entertainment Inc

    Orlando, FL
    26 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Assembler Mfg Direct - Truss. Be the first to apply!