CNC Mill Set-up Operator-7:00 am to 3:30 pm
$21 - $24 per hourBabbitting Service Inc
Job Description
Job Description
Description:
Pay range: $21.00 to $24.00 DOE
Job Type: Full-Time,
Shift Hours: 7:00 am to 3:30 pm
Benefits: Comprehensive Benefit Package**
BSI participates in E-Verify
Babbitting Service, Inc (BSI) is a leader in the manufacture, design and repair of Hydrodynamic Fluid Film Bearings (Babbitt Bearings) and related parts since 1961. BSI services OEM's, aftermarket, and end users across the globe. We are seeking to hire a CNC Mill Set-up/ Operator , with a minimum of 3+years' experience, to produce machined parts by programming, setting up, and operating a CNC Mill. BSI is a job shop, prototype and R&D manufacturing facility and parts can range from simple to highly complex with low quantity requirements varying from 1 or 2, to 20 or more per lot. This type of manufacturing requires quick set-ups, precision execution, and attention to detail for success.
CNC Mill Machinist Job Responsibilities:
- Set up and run Haas CNC mills.
- Adjust program as needed for optimum performance.
- Understand and select correct tooling.
- Produce parts within required tolerances and specifications.
- Hold tight tolerance up to +/-.0001".
- Ensure the CNC Machine operates at the highest level of productivity and quality appropriate to the assigned job.
- Use overhead crane system to load and unload heavy parts.
- Assemble cutting tools in tool holders and position in magazine as needed to machine parts.
- Measure work pieces for conformance to specification using measuring instruments such as but not limited to micrometers, calipers, dial indicators and gages.
- Adjust machine speeds and feeds and change cutters to machine parts efficiently.
- Responsible for keeping work area safe, clean and organized.
**Benefits:
- 401(k)
- 401(k) matching
- Profit sharing
- Dental insurance
- Health insurance
- Vision insurance
- Paid time off
- Referral program
- Tool loan program
- Tuition reimbursement
- Must have a minimum of 3+ years' experience setting up CNC mill machines preferably Haas.
- Must be able to interpret blueprints and have a clear understanding of geometric tolerances and surface finishes.
- Knowledge of Renishaw probing system preferred but not required.
- Must have basic math skills.
$21 - $24 per hour
...Description Pay range: $21.00 to $24.00 DOE Job... ...Full-Time, Shift Hours: 7:00 am to 3:30 pm Benefits: Comprehensive... ...We are seeking to hire a CNC Lathe Machinist with a minimum... ...produce machined parts by setting up and operating a Fanuc control CNC Lathe....SuggestedFull timeShift work$21 - $23 per hour
...Lathe Machinist Pay range: $21.00 to $23.00 DOE Job Type: Full-Time Shift Hours: 7:00 am to 3:30 pm Benefits: Comprehensive... ...manufacturing requires quick set-ups, precision execution, and... ...years' experience setting up and operating a manual lathe. Must be...SuggestedFull timeShift work- ...periodically check to insure machine set points are accurate. # Operate various production machines (extrusion... ...Experience: Requires a minimum of 1 to 3 years experience operating machines... ...intermediate level, including use of CNC machines. Machines, Tools, Equipment...SuggestedPart timeNight shift
- ...and modify tooling and machine parts. • Perform machining operations using lathes, mills, grinders, and drill presses. • Conduct preventative... ...Commitment to safety and quality standards “Responsible for food safety, food quality and site safety.” Revised 01/30/2026...SuggestedWork experience placementDay shift
$20 - $23 per hour
...Description Job Description CNC Operator 2 nd shift | $20-$23 per hour | Monday-Friday |3 :00 pm-11:30 pm What Matters Most... ...environment. Responsibilities: Set up CNC machines according to... ...tools such as lathes, and milling machines, adjusting machine...SuggestedHourly payWeekly payTemporary workWork at officeMonday to FridayShift workDay shiftAfternoon shift$28 per hour
...Description Summary: Responsible for the set up of injection molds for production and... ...Permanent, 3rd Shift Salary: Starting at $28.00+ per hour, depending on experience Who... ...“Responsible for food safety, food quality and site safety.” Revised 01/30/2026...Hourly payPermanent employmentFull timeNight shift$20 - $25 per hour
...CNC Machine Operator - PM Shift Salary Range $20.00 - $25.00 Hourly Position Type Full Time Job Shift 2nd Shift Education Level... ...Essential Duties and Responsibilities Sets up (or the ability to learn) and operates a 3-axis, Milling, EDM and/or 5-axis creep feed grinding...Hourly payFull timeLocal areaImmediate startRelocation packageMonday to ThursdayShift workAfternoon shift$20 - $23 per hour
...Description Job Description CNC Operator 2 nd shift | $20-$23 per hour | Monday-Friday |3 :00 pm-11:30 pm What Matters Most... ...environment. Responsibilities: Set up CNC machines according to... ...tools such as lathes, and milling machines, adjusting machine...Hourly payWeekly payTemporary workMonday to FridayShift workDay shiftAfternoon shift$23 - $24 per hour
...Machine Operator (3rd Shift 5:00 PM 5:00 AM) Shape Your Skills. Shape Your Future. Looking for hands-on work and steady hours? Join FlexPack... ...assisting with coating machines preferred. What You'll Do Set up and operate adhesive coating machines Adjust speed,...Shift workNight shift$20 per hour
...approximately 2-3 months due to a... ...out garbage. Setting up production cells... ...product assembly. Operating a variety of... ...manual chuckers, CNC lathes, vertical mills, multi-press, reamer... ...shift is from 7 am to 3:30 pm, with voluntary overtime... ...position is $20.00/hr. Eligibility...Contract workTemporary workShift work$22 per hour
...CNC Operator HYDAC is a family-owned and operated... ...and performing set-ups on a CNC machine... ...set-up horizontal milling machines, modify program... ...required. ~1 to 3 years' experience... ...Shift hours are 11 PM to 7 AM - Monday - Friday... ...position is $22.00/hr. ~ HYDAC offers...Hourly payTemporary workLocal areaAll shiftsMonday to FridayShift workNight shiftDay shiftAfternoon shift$38 - $48 per hour
...bonus Starting Pay $38.00 - $48.00 (based on experience... ...) 1st Shift Hours are 7:00am - 4:00pm **... ...department used in secondary operations All auxiliary... ...Operate lathe, vertical mill, drill press and grinders... ...contribution of an amount equal to 3% of employee's annual...Hourly payTemporary workRelocation packageShift workNight shiftDay shift$18.5 per hour
...Description HIRING IMMEDIATELY: MACHINE OPERATOR IN CAROL STREAM, IL Accurate... ...Schedule: 1st Shift, Monday – Thursday, 6:00 AM – 4:30 PM ~ Training period approximately 3–4 weeks ~ After Training: 3rd Shift, Monday – Thursday, 7:30 PM – 6:00 AM ~ Pay after...Temporary workWork at officeLocal areaImmediate startShift workNight shiftDay shift$38 - $48 per hour
...bonus Starting Pay: $38.00 - $48.00 (based on experience) 1st Shift Hours: 7:00am - 4:00pm Responsibilities... ...used in secondary operations. All auxiliary equipment... ...Operate lathe, vertical mill, drill press and grinders... ...contribution of an amount equal to 3% of employee's annual...Hourly payTemporary workRelocation packageShift workDay shift$20 per hour
...Shift hours: 2nd shift – 3:30 PM – 12 AM or 3:30 PM – 2... ...PM Pay rate: $20.00/hr plus $1.00/hr shift... ...Perform duties to set-up and operate equipment to weld tubing... ...adjusts and operates tube mills/welders to form tubing... ...weld rolls and blades. 7.Must perform weld...Weekly payTemporary workShift workDay shiftAfternoon shift$17.33 per hour
...Job Description Job Description Hiring 2nd Shift Machine Operators with Tons of Overtime! Start Work Today! Call Today! We are... ...for 2nd shift in Bartlett, IL 2nd shift Machine Operator 3:30 PM -12:00 AM Must be able work OT until 2am and Saturday OT TEMP-TO...Weekly payTemporary workStart working todayImmediate startAfternoon shift- ...Operator Technician Do you have at least 5 years of manufacturing experience? Do you like being on schedule with minimum defects? Do... ...of your work? We are looking for a: Operator Technician (7:00am-3:30pm) We are Faber-Castell Cosmetics, a division of Faber-Castell...WorldwideDay shift
- ...: 2nd Shift Metallic Machine Operator Location: St Charles, IL... ...Employment Type: Full time (2:00 pm - 10:30 pm, Mondays through Fridays,... ...Responsibilities / Tasks Equipment Set-up and Operation Work... ...machinery Extruder, Mill and mixing operating experience...Full timeApprenticeshipLocal areaMonday to FridayAfternoon shift
$18 - $25 per hour
...Position Summary Operates CNC machines and perform secondary... ...make offset adjustments. Set up and operate milling, scarfing, butt, and... ...experience up to \$18-\$25.00/hr WORK ENVIRONMENT... ...annual contribution equal to 3% of pay. ~ Career development...Permanent employmentTemporary workFor contractorsWork experience placementImmediate start- ...Technician to perform duties to set-up, program,... ...equipment. Shift hours are 10:30 pm to 7:00 am. The Automation... ...required to run operation, and obtaining all necessary... ...: A minimum of 3 years previous experience... ...robotic technology and CNC equipment required....Contract workTemporary workAll shiftsShift workNight shift
$25 - $29 per hour
...CNC Milling Operator / Machinist The CNC Milling Operator is responsible for setting up and operating CNC vertical milling machines to produce... ...Essential Skills Minimum 3 years of experience setting... ...range for this position is $25.00 - $29.00/hr. Eligibility...Permanent employmentContract workTemporary workMonday to FridayDay shift$30 per hour
...rd Shift Openings Up to $30/hr + Shift Differential ~2nd Shift (2:30 PM – 11:00 PM): +$1/hr ~3rd Shift (10:30 PM – 7:00 AM): +$2/hr Paid... ...rapid growth (expanding from 3 to 12 machines), we are adding... ...issues and help keep operations running efficiently What...Shift workNight shiftDay shiftAfternoon shift$28 - $34 per hour
...CNC Set-Up Machinist - 1st Shift HYDAC is a family-owned and operated business with a vibrant and rewarding working environment... ...set-up on both 5 and 6-axis milling and lathe machines. The Set-Up... ...Benefits: ~1st Shift hours are 7 AM to 3 PM ~ Hourly rate for this...Hourly payTemporary workLocal areaDay shift- ...CNC Lathe Machine Operator Location: Batavia, IL Shift: 6:00 AM to 2:30 PM Pay: 23.00 per hour Job Overview: Operate CNC Lathe machines... ...Operate CNC machines including mills and lathes Read and follow blueprints and drawings Set feeds and speeds and follow...Hourly payTemporary workShift work
$22.27 per hour
...Machine Operator Location: Geneva, IL Pay: $22.27 + incentive pay Shifts Available: ~2nd: 2:00PM/3:00PM - 10:30PM/11:30PM ~3rd: 10:00PM/11:00 PM 6:00AM/7:30 AM What We Offer ~ Health, dental, and vision insurance ~401k with company match ~ Paid...For contractorsWork experience placementLocal areaWorldwideShift workWeekend work- CNC Machine Shop Supervisor - Elgin, IL Experience... ...Experience required: 3 Years Education... ...will oversee day-to-day operations of the machine shop... ...nd shift hours are 3:00 PM - 11:30 PM from Monday to Friday... ...and quality output. Set up and operate CNC milling and lathe machines....Temporary workVisa sponsorshipRelocation packageMonday to FridayAfternoon shift
$17 - $19 per hour
...Job Description Machine Operator - Band Saw (Training Provided) Elgin, IL Pay: Based on experience We are currently... ...Schaumburg,IL 60173 Walk-ins Welcome: Monday to Friday, 10:00 AM - 3:00 PM Apply Online: Email: ****@*****.*** Phone...Work at officeMonday to Friday$21.5 per hour
...Job Description Job Description Machine Operator (2nd & 3rd Shift & Rotating Night) – St. Charles, IL $21.50/hr + Shift Premium... ...with long-term potential. Available Shifts 2nd Shift: 2:00 PM – 10:30 PM, Monday–Friday $22.25/hr 3rd Shift: 10:00 PM – 6:30...Immediate startMonday to FridayShift workNight shiftRotating shiftWeekend workAfternoon shift- ...Glendale Heights, IL. Seeking CNC machinist for each of their... ...Shifts: 1st Shift (7:00am-3:00pm) Monday-Friday 2nd Shift... ...machinist ~ Proven ability to set up and operate CNC machines independently... ...operating both CNC lathes and milling machines ~ Ability to read...Temporary workMonday to FridayShift workNight shiftDay shiftAfternoon shift
$62.4k - $83.2k
...Description Job Title: CNC Programmer and Operator Job Description... ...Programmer and Operator to set up and operate Haas... ...up, and operating CNC milling machines. ~ Proficient... ...position is $62400.00 - $83200.00/yr. Medical... ...to close on Jun 30, 2026. About Aerotek...Weekly payPermanent employmentTemporary workWork at officeDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Mill Set-up Operator-7:00 am to 3:30 pm. Be the first to apply!


