CERTIFIED WELD INSPECTOR
$35 - $40 per hourFox Valley Metal-Tech
Certified Weld Inspector
Hot Job
Frye - Chandler, AZ 85226
Overview
Salary Range $35.00 - $40.00 Hourly Level Experienced
Description
Functions and Responsibilities:
- Read and interpret basic drawings, weld procedure specifications (WPS), and welding symbols
- Able to identify weld discontinuities
- Basic understanding of weld acceptance criteria
- Basic weld inspection tool usage: fillet gauge, V-WAC gauge, combination square, protractor, caliper, tape measure, flashlight, mirror, magnifying glass, temperature crayon
- Ability to answer welding-related questions or know where to direct questions
- Fully inspect weldments and sub-weldments
- Document results of inspections, including VT reports and weld maps
- Comprehend the introduction to First Article Inspection (FAIs)
- Communicate welding nonconformances to Welding Supervisor, Welding Trainer, Welder Development Coordinator, Lead Weld Inspector
- Maintain material certifications and inspection documentation
- Label nonconforming parts
- Use calibrated measuring equipment where applicable
- Follow all safety procedures
- Ability to work in a fast-paced environment is required
- Good verbal and written communication skills is required
Qualifications
Minimum Requirements of Skills, Qualifications, and Experience: Must be a US citizen.
Education:
- GED/High School Diploma/Technical Degree
Experience:
- 1-3 Years welding - preferred
- 6+ Years welding inspection experience - required
- 3+ Years of dimensional inspection experience - required
Specialized Experience:
- AWS CWI or ASNT VT Level II – required
- Ability to be certified to ASNT VT Level II in-house within 30 days of hire
Physical Demands: The physical demands described below are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Frequently: sit, grasp/hold, fine manipulation of both hands
- Occasionally: reach at shoulder, lift/carry, and walk
- Seldom: stand, reach below shoulder, reach above shoulder
- ...construction. ABOUT THIS OPPORTUNITY If you're an experienced welding inspector who understands the quality demands of semiconductor construction and process piping, we want to talk to you. As a Certified Welding Inspector (CWI), you'll lead welding and fabrication...SuggestedWeekly payFor contractorsApprenticeshipInternshipH1bLocal areaVisa sponsorshipWork visa
- ...Job Description Job Description 6G Certified Welder – Temp-to-HireLocation: Chandler, AZJob Type: Temp-to-HireProject: Long-TermQLM... ...potential to transition into a permanent position.Requirements6G welding certification requiredMust provide a photo of your 6G...SuggestedPermanent employmentTemporary workCurrently hiringLocal area
- ...Gilbert, AZ is seeking an experienced Welder to join our team. The Welder fabricates metal components and assemblies using various welding and cutting techniques based on technical drawings, specifications, or customer provided samples. When welding projects are not active...Suggested
$22 per hour
...Quality Inspector Now hiring for a Quality Inspector Location: Phoenix, AZ Pay Rate: $22.00 per hour Schedule: Monday-Friday, 2:00... ...equivalent required Associate degree or technical education preferred Certified Quality Auditor (CQA) certification or equivalent experience...SuggestedHourly payWeekly payWork at officeLocal areaImmediate startMonday to FridayShift work$22 per hour
...Quality Inspector Now hiring for a Quality Inspector Location: Phoenix, AZ Pay Rate: $22.00 per hour Schedule: Monday-Friday, 2:00... ...equivalent required Associate degree or technical education preferred Certified Quality Auditor (CQA) certification or equivalent experience...SuggestedHourly payWeekly payTemporary workFor contractorsWork at officeLocal areaImmediate startMonday to FridayShift work$33 - $38 per hour
...Valid OSHA 10 certification. Ability to pass a 3G, 4G stick welding test. Ability to pass a 3G, 4G NR232 Fluxcore Wire test.... ...Disabled Veteran Owned Small Business (SDVOSB), as well as a SBA, Certified Small Disadvantaged Business, Thus helping achieve goals set on...Hourly payApprenticeship- TechStaff of AZ in Tempe, AZ seeks skilled Solder Technicians for through-hole soldering on PCBs. Shifts include 1st, 2nd and 3rd with varied schedules; you will solder, inspect, test, and pack to meet customer specifications. The role requires IPC training, safety adherence...Hourly payShift work
- ...motivated individuals to join its Apprenticeship Program to become certified Journeyman Ironworkers (JIW). The role involves learning to... ...Ironworkers, gain hands-on experience, and progress through safety, welding, and fabrication trainings while meeting OSHA 10 requirements...ApprenticeshipTrial period
- Phoenix National Labs, part of the ATS Family, seeks Certified ICC/IFC Special Inspectors for major commercial, industrial, and semiconductor projects in Tempe, AZ. Opportunities are permanent and/or contract-based for those in the Phoenix/Tempe region or willing to relocate...Permanent employmentContract workFor contractorsRelocation
- ...Family of Companies, located in Tempe, AZ, is seeking Certified ICC / IFC Special Inspectors to support major commercial, industrial, manufacturing,... ...hold certifications and experience in special inspection, welding inspection, and nondestructive testing. These are...Permanent employmentContract workPart timeFor contractorsLocal areaImmediate startRelocationShift work
- Viasat in Tempe seeks a Quality Technician to support product and process quality across the manufacturing lifecycle. You will inspect electrical/electronic and mechanical components, create inspection records, review drawings, and work with cross-functional teams to ensure...
$24 - $40 per hour
...relevant industry codes regarding pressure equipment and piping safety and compliance. Additional Skills & Qualifications Welding or brazing technical training preferred. Experience in manufacturing, pipefitting, or industrial assembly. Why Work Here?...Weekly payContract workTemporary workMonday to FridayMonday to ThursdayShift workWeekend workDay shiftAfternoon shift$25 - $45 per hour
...& KIA MASTER TECHNICIANS — WE WANT YOU! Horne Kia in Gilbert, AZ, is looking for experienced Automotive Mainline Technicians and Certified Kia Master Technicians to join our high-volume service department. Whether you're an experienced mainline technician or a Kia Master...Hourly payPrice workFull time- ...Ford Certified Diesel Technician San Tan Ford in Gilbert, AZ is looking for Ford Certified Diesel Technicians to take on a range of light-duty and medium-duty diesel repair and maintenance work. This is a role for someone who reads a repair order, builds a plan, and...Local areaFlexible hours
- ...Lays out trim lines, hole patterns, file contours and performs hand forming, riveting, bolting, clamping, dimpling and locating tack weld to build up subassemblies and assemblies. # Performs pressure testing on fabricated assemblies as required. # Setup and operates...Permanent employmentCasual work
$35 - $55 per hour
...years of experience in ironworking and welding. Ironworkers are involved in raising, positioning... ..., arc gouging, grinding Must be certified or able to pass a 3G and 4G weld test (... ...-Tech Quality Assurance Quality Control Inspector Phoenix, AZ | Active | Entry Level |...Hourly payNight shiftWeekend work- ...structural components, pump skids, hangers, and miscellaneous fabricated assemblies. Scope of Work Includes: Structural fabrication and welding Aluminum MIG welding Carbon steel welding Reading and interpreting hand-drawn isometrics and fabrication drawings Layout, fit-...
- ...The Quality Inspector is responsible to ensure products and incoming materials meet applicable contract, drawings, specifications, and... ...High School Diploma or GED Strong communication skills IPC-A-610 Certified IPC-A-620 Certified J-STD-001 Certified Proficient in...Permanent employmentFull timeContract workTemporary workWork at officeFlexible hours
$20 - $27.5 per hour
Job TitleJob TitleJob DescriptionApplied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture...$25 per hour
...HouseMaster Greater Phoenix! LOCALLY OWNED AND OPERATED BY AN INSPECTOR (NO PRIVATE EQUITY FIRMS!) We are a small but mighty... ...and techniques. We use HomeGauge report writer and ISN. Certified or trained to perform Termite, Radon & Mold Inspections a plus...Part timeFlexible hours- ...seeking a Metal Finisher to own the full metal prep process before final coating, including surface grinding, DA finishing, and minor weld repairs. You will contribute to the look and fit of finished parts. The role offers starting pay at $18/hr with weekly pay, Monday-...Weekly payMonday to Friday
- Radius Aerospace - Phoenix in Chandler, AZ is seeking a Sheet Metal Mechanic to join our fast-paced machine shop and contribute to high-quality metal fabrication. This full-time role involves manual labor and precise conversion of blueprints into finished components. We...Full time
- ...ensure customer specifications are being met Maintain a clean and organized workstation Participate in IPC training and become certified as a Specialist Operate X-ray, Automated Optimal Inspection (AOI) and other assessment equipment Operate Depanelizers and Press-...Casual workNight shiftDay shiftAfternoon shift
$20 - $26 per hour
...participation from individuals with different ideas, experiences, and perspectives. Are you ready to be part of our future? Robotic Weld Operator Weld It. Program It. Build It. Take It Off-Road! Love trucks, welding, and working with cutting-edge technology? At...Hourly payWeekly payLocal areaMonday to FridayWeekend work- MTM Transit is seeking a Fleet Maintenance Technician Class A to service a 112-vehicle fleet in Gilbert, AZ. You will diagnose, repair, and maintain vehicles, with training and ASE incentives provided to advance your skills. The role emphasizes safety, reliability, and ...
$19 - $20 per hour
...PCB Manufacturing | QC Inspector Scope: Responsible for inspecting and evaluating final products to ensure full compliance with customer specifications, internal quality standards, and regulatory requirements prior to delivery. This role plays a critical part in...Permanent employment- ...insurable with good driving record, have a valid drivers license, and be drug free. Preferred Education: Associates degree or ASE certified + 5 years experience in professional shop environment at level B or above. Pay DOE: We believe in fair wages with great...Hourly payFull timeImmediate start
- ...General Description: The QA/QC Inspector plans and conducts activities concerned with... ...subcontractors for pipe and equipment installation, welding inspection and oversight of... ...certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) and /or ICC...For contractorsWork experience placementFor subcontractorWork at officeMonday to Friday
$28 - $34 per hour
If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full Time Technical Chandler, AZ, US 5 days ago Requisition ID: 1025 Salary Range: $28.00 To $34.00 Hourly Structural...Hourly payFull timeTemporary workRemote work$35 - $40 per hour
...Control InspectorAir Transport Components (ATC), an FAA-approved Part 145 Repair Station, is seeking an experienced Quality Control Inspector with 10 years' experience as a maintenance technician or mechanic. Quality Control Inspectors ensures all aircraft components are...Hourly payTemporary workRelocation packageFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CERTIFIED WELD INSPECTOR. Be the first to apply!


